Allow generic parameters in intra-doc links
Fixes#62834.
---
The contents of the generics will be mostly ignored (except for warning
if fully-qualified syntax is used, which is currently unsupported in
intra-doc links - see issue #74563).
* Allow links like `Vec<T>`, `Result<T, E>`, and `Option<Box<T>>`
* Allow links like `Vec::<T>::new()`
* Warn on
* Unbalanced angle brackets (e.g. `Vec<T` or `Vec<T>>`)
* Missing type to apply generics to (`<T>` or `<Box<T>>`)
* Use of fully-qualified syntax (`<Vec as IntoIterator>::into_iter`)
* Invalid path separator (`Vec:<T>:new`)
* Too many angle brackets (`Vec<<T>>`)
* Empty angle brackets (`Vec<>`)
Note that this implementation *does* allow some constructs that aren't
valid in the actual Rust syntax, for example `Box::<T>new()`. That may
not be supported in rustdoc in the future; it is an implementation
detail.
They were not formatted correctly, so rustdoc was interpreting some
parts as code. Also cleaned up some other query docs that weren't
causing issues, but were formatted incorrectly.
Add TraitDef::find_map_relevant_impl
This PR adds a method to `TraitDef`. While `for_each_relevant_impl` covers the general use case, sometimes it's not necessary to scan through all the relevant implementations, so this PR introduces a new method, `find_map_relevant_impl`. I've also replaced the `for_each_relevant_impl` calls where possible.
I'm hoping for a tiny bit of efficiency gain here and there.
Implementation of RFC2867
https://github.com/rust-lang/rust/issues/74727
So I've started work on this, I think my next steps are to make use of the `instruction_set` value in the llvm codegen but this is the point where I begin to get a bit lost. I'm looking at the code but it would be nice to have some guidance on what I've currently done and what I'm doing next 😄
Bounds of the form `type Future: Future<Result=Self::Result>` exist in
some ecosystem crates. To validate these bounds for trait objects we
need to normalize `Self::Result` in a way that doesn't cause a cycle.
Record `expansion_that_defined` into crate metadata
Fixes#77523
Now that hygiene serialization is implemented, we also need to record
`expansion_that_defined` so that we properly handle a foreign
`SyntaxContext`.
Reduce boilerplate with the matches! macro
Replaces simple bool `match`es of the form
match $expr {
$pattern => true
_ => false
}
and their inverse with invocations of the matches! macro.
Limited to rustc_middle for now to get my feet wet.
Fixes#77523
Now that hygiene serialization is implemented, we also need to record
`expansion_that_defined` so that we properly handle a foreign
`SyntaxContext`.
This is a combination of 18 commits.
Commit #2:
Additional examples and some small improvements.
Commit #3:
fixed mir-opt non-mir extensions and spanview title elements
Corrected a fairly recent assumption in runtest.rs that all MIR dump
files end in .mir. (It was appending .mir to the graphviz .dot and
spanview .html file names when generating blessed output files. That
also left outdated files in the baseline alongside the files with the
incorrect names, which I've now removed.)
Updated spanview HTML title elements to match their content, replacing a
hardcoded and incorrect name that was left in accidentally when
originally submitted.
Commit #4:
added more test examples
also improved Makefiles with support for non-zero exit status and to
force validation of tests unless a specific test overrides it with a
specific comment.
Commit #5:
Fixed rare issues after testing on real-world crate
Commit #6:
Addressed PR feedback, and removed temporary -Zexperimental-coverage
-Zinstrument-coverage once again supports the latest capabilities of
LLVM instrprof coverage instrumentation.
Also fixed a bug in spanview.
Commit #7:
Fix closure handling, add tests for closures and inner items
And cleaned up other tests for consistency, and to make it more clear
where spans start/end by breaking up lines.
Commit #8:
renamed "typical" test results "expected"
Now that the `llvm-cov show` tests are improved to normally expect
matching actuals, and to allow individual tests to override that
expectation.
Commit #9:
test coverage of inline generic struct function
Commit #10:
Addressed review feedback
* Removed unnecessary Unreachable filter.
* Replaced a match wildcard with remining variants.
* Added more comments to help clarify the role of successors() in the
CFG traversal
Commit #11:
refactoring based on feedback
* refactored `fn coverage_spans()`.
* changed the way I expand an empty coverage span to improve performance
* fixed a typo that I had accidently left in, in visit.rs
Commit #12:
Optimized use of SourceMap and SourceFile
Commit #13:
Fixed a regression, and synched with upstream
Some generated test file names changed due to some new change upstream.
Commit #14:
Stripping out crate disambiguators from demangled names
These can vary depending on the test platform.
Commit #15:
Ignore llvm-cov show diff on test with generics, expand IO error message
Tests with generics produce llvm-cov show results with demangled names
that can include an unstable "crate disambiguator" (hex value). The
value changes when run in the Rust CI Windows environment. I added a sed
filter to strip them out (in a prior commit), but sed also appears to
fail in the same environment. Until I can figure out a workaround, I'm
just going to ignore this specific test result. I added a FIXME to
follow up later, but it's not that critical.
I also saw an error with Windows GNU, but the IO error did not
specify a path for the directory or file that triggered the error. I
updated the error messages to provide more info for next, time but also
noticed some other tests with similar steps did not fail. Looks
spurious.
Commit #16:
Modify rust-demangler to strip disambiguators by default
Commit #17:
Remove std::process::exit from coverage tests
Due to Issue #77553, programs that call std::process::exit() do not
generate coverage results on Windows MSVC.
Commit #18:
fix: test file paths exceeding Windows max path len
Overhaul const-checking diagnostics
The primary purpose of this PR was to remove `NonConstOp::STOPS_CONST_CHECKING`, which causes any additional errors found by the const-checker to be silenced. I used this flag to preserve diagnostic parity with `qualify_min_const_fn.rs`, which has since been removed.
However, simply removing the flag caused a deluge of errors in some cases, since an error would be emitted any time a local or temporary had a wrong type. To remedy this, I added an alternative system (`DiagnosticImportance`) to silence additional error messages that were likely to distract the user from the underlying issue. When an error of the highest importance occurs, all less important errors are silenced. When no error of the highest importance occurs, all less important errors are emitted after checking is complete. Following the suggestions from the important error is usually enough to fix the less important errors, so this should lead to better UX most of the time.
There's also some unrelated diagnostics improvements in this PR isolated in their own commits. Splitting them out would be possible, but a bit of a pain. This isn't as tidy as some of my other PRs, but it should *only* affect diagnostics, never whether or not something passes const-checking. Note that there are a few trivial exceptions to this, like banning `Yield` in all const-contexts, not just `const fn`.
As always, meant to be reviewed commit-by-commit.
r? `@oli-obk`
This patch adds support for the LLVM cmse_nonsecure_entry attribute.
This is a target-dependent attribute that only has sense for the
thumbv8m Rust targets.
You can find more information about this attribute here:
https://developer.arm.com/documentation/ecm0359818/latest/
Signed-off-by: Hugues de Valon <hugues.devalon@arm.com>
Optimize `IntRange::from_pat`, then shrink `ParamEnv`
Resolves#77058.
r? `@Mark-Simulacrum`
cc `@vandenheuvel`
Looking at the output of `perf report` for #76244, the hot instructions seemed to be around the call to `pat_constructor` in `IntRange::from_pat`. I carried out an obvious optimization, but it actually made the instruction count higher (see #77075). However, it seems to have mitigated whatever was causing the pipeline stalls, so when combined with #76244, it's a net win.
As you can see below, the regression in #76244 seems to have originated from something measured by `stalled-cycles-backend`. I'll try to collect some finer-grained stats to see if I can isolate it. I wish I had a better idea of what was going on here. I'd like to prevent the regression from reappearing in the future due to small changes in unrelated code.
<details>
<summary>Current `master`:</summary>
```
Performance counter stats for 'cargo +baseline-stage1 check':
2,275.67 msec task-clock:u # 0.998 CPUs utilized
0 context-switches:u # 0.000 K/sec
0 cpu-migrations:u # 0.000 K/sec
49,826 page-faults:u # 0.022 M/sec
5,117,221,678 cycles:u # 2.249 GHz
299,655,943 stalled-cycles-frontend:u # 5.86% frontend cycles idle
2,284,213,395 stalled-cycles-backend:u # 44.64% backend cycles idle
8,051,871,959 instructions:u # 1.57 insn per cycle
# 0.28 stalled cycles per insn
1,359,589,402 branches:u # 597.447 M/sec
7,359,347 branch-misses:u # 0.54% of all branches
2.281030026 seconds time elapsed
2.108197000 seconds user
0.164183000 seconds sys
```
</details>
<details>
<summary>Shrink `ParamEnv` without changing `IntRange::from_pat`:</summary>
```
Performance counter stats for 'cargo +perf-stage1 check':
2,751.79 msec task-clock:u # 0.996 CPUs utilized
0 context-switches:u # 0.000 K/sec
0 cpu-migrations:u # 0.000 K/sec
50,103 page-faults:u # 0.018 M/sec
6,260,590,019 cycles:u # 2.275 GHz
317,355,920 stalled-cycles-frontend:u # 5.07% frontend cycles idle
3,397,743,582 stalled-cycles-backend:u # 54.27% backend cycles idle
8,276,224,367 instructions:u # 1.32 insn per cycle
# 0.41 stalled cycles per insn
1,370,453,386 branches:u # 498.023 M/sec
7,281,031 branch-misses:u # 0.53% of all branches
2.763265838 seconds time elapsed
2.544578000 seconds user
0.204548000 seconds sys
```
</details>
<details>
<summary>Shrink `ParamEnv` and change `IntRange::from_pat`: </summary>
```
Performance counter stats for 'cargo +perf-stage1 check':
2,295.57 msec task-clock:u # 0.996 CPUs utilized
0 context-switches:u # 0.000 K/sec
0 cpu-migrations:u # 0.000 K/sec
49,959 page-faults:u # 0.022 M/sec
5,151,407,066 cycles:u # 2.244 GHz
324,517,829 stalled-cycles-frontend:u # 6.30% frontend cycles idle
2,301,671,001 stalled-cycles-backend:u # 44.68% backend cycles idle
8,130,868,329 instructions:u # 1.58 insn per cycle
# 0.28 stalled cycles per insn
1,356,618,512 branches:u # 590.972 M/sec
7,323,800 branch-misses:u # 0.54% of all branches
2.304509653 seconds time elapsed
2.128090000 seconds user
0.163909000 seconds sys
```
</details>
Remove `#[rustc_allow_const_fn_ptr]` and add `#![feature(const_fn_fn_ptr_basics)]`
`rustc_allow_const_fn_ptr` was a hack to work around the lack of an escape hatch for the "min `const fn`" checks in const-stable functions. Now that we have co-opted `allow_internal_unstable` for this purpose, we no longer need a bespoke attribute.
Now this functionality is gated under `const_fn_fn_ptr_basics` (how concise!), and `#[allow_internal_unstable(const_fn_fn_ptr_basics)]` replaces `#[rustc_allow_const_fn_ptr]`. `const_fn_fn_ptr_basics` allows function pointer types to appear in the arguments and locals of a `const fn` as well as function pointer casts to be performed inside a `const fn`. Both of these were allowed in constants and statics already. Notably, this does **not** allow users to invoke function pointers in a const context. Presumably, we will use a nicer name for that (`const_fn_ptr`?).
r? @oli-obk
