Used aforementioned variants to extract options that have explicit
`putvar` calls associated with them in the subsequent code. When the
explicit `putvar` call was conditional on some potentially complex
condition, moved the `putvar` call out to the main control flow of the
script so that it always runs if necessary.
----
As a driveby fix, captured the error exit when doing the test run of
`rustc --version` from `CFG_LOCAL_RUST_ROOT`, and signal explicit
configure failure when it did not run successfully. (If we cannot run
`rustc`, we really shouldn't try to keep going.)
----
Finally, in response to review feedback, went through and identified
cases where we had been calling `putvar` manually (and thus my naive
translation used `opt_nosave`/`valopt_nosave`), and then verified
whether a manual `putvar` was necessary (i.e., was each variable in
question manually computed somewhere in the `configure` script).
In cases that did not meet this criteria, I revised the code to use
the `opt`/`valopt` directly and removed the corresponding `putvar`,
cleaning things up a teeny bit.
----
Fix#17887.
This commit removes the libuv and gyp submodules, as well as all build
infrastructure related to them.
For more context, see the [runtime removal
RFC](https://github.com/rust-lang/rfcs/pull/230)
[breaking-change]
Adds a new configure flag, --release-channel, which determines how the version
number should be augmented with a release label, as well as how the distribution
artifacts will be named. This is entirely for use by the build automation.
--release-channel can be either 'source', 'nightly', 'beta', or 'stable'.
Here's a summary of the affect of these values on version number and
artifact naming, respectively:
* source - '0.12.0-pre', 'rust-0.12.0-pre-...'
* nightly - '0.12.0-nightly', 'rust-nightly-...'
* beta - '0.12.0-beta', 'rust-beta-...'
* stable - '0.12.0', 'rust-0.12.0-...'
Per http://discuss.rust-lang.org/t/rfc-impending-changes-to-the-release-process/508/1
Not included are two required patches:
* LLVM: segmented stack support for DragonFly [1]
* jemalloc: simple configure patches
[1]: http://reviews.llvm.org/D4705
This commit disables rustc's emission of rpath attributes into dynamic libraries
and executables by default. The functionality is still preserved, but it must
now be manually enabled via a `-C rpath` flag.
This involved a few changes to the local build system:
* --disable-rpath is now the default configure option
* Makefiles now prefer our own LD_LIBRARY_PATH over the user's LD_LIBRARY_PATH
in order to support building rust with rust already installed.
* The compiletest program was taught to correctly pass through the aux dir as a
component of LD_LIBRARY_PATH in more situations.
The major impact of this change is that neither rustdoc nor rustc will work
out-of-the-box in all situations because they are dynamically linked. It must be
arranged to ensure that the libraries of a rust installation are part of the
LD_LIBRARY_PATH. The default installation paths for all platforms ensure this,
but if an installation is in a nonstandard location, then configuration may be
necessary.
Additionally, for all developers of rustc, it will no longer be possible to run
$target/stageN/bin/rustc out-of-the-box. The old behavior can be regained
through the `--enable-rpath` option to the configure script.
This change brings linux/mac installations in line with windows installations
where rpath is not possible.
Closes#11747
[breaking-change]
In line with what @brson, @cmr, @nikomatsakis and I discussed this morning, my
redux of the tutorial will be implemented as the Guide. This way, I can work in
small iterations, rather than dropping a huge PR, which is hard to review. In
addition, the community can observe my work as I'm doing it.
This adds a note in line with [this comment][reddit] that clarifies the state
of the tutorial, and the community's involvement with it.
[reddit]: http://www.reddit.com/r/rust/comments/28bew8/rusts_documentation_is_about_to_drastically/ci9c98k
This commit disables rustc's emission of rpath attributes into dynamic libraries
and executables by default. The functionality is still preserved, but it must
now be manually enabled via a `-C rpath` flag.
This involved a few changes to the local build system:
* --disable-rpath is now the default configure option
* Makefiles now prefer our own LD_LIBRARY_PATH over the user's LD_LIBRARY_PATH
in order to support building rust with rust already installed.
* The compiletest program was taught to correctly pass through the aux dir as a
component of LD_LIBRARY_PATH in more situations.
The major impact of this change is that neither rustdoc nor rustc will work
out-of-the-box in all situations because they are dynamically linked. It must be
arranged to ensure that the libraries of a rust installation are part of the
LD_LIBRARY_PATH. The default installation paths for all platforms ensure this,
but if an installation is in a nonstandard location, then configuration may be
necessary.
Additionally, for all developers of rustc, it will no longer be possible to run
$target/stageN/bin/rustc out-of-the-box. The old behavior can be regained
through the `--enable-rpath` option to the configure script.
This change brings linux/mac installations in line with windows installations
where rpath is not possible.
Closes#11747
[breaking-change]
Rust no longer has support for JIT compilation, so it doesn't currently
require a PaX MPROTECT exception. The extended attributes are preferred
over modifying the binaries so it's not actually going to work on most
systems like this anyway.
If JIT compilation ends up being supported again, it should handle this
by *always* applying the exception via an extended attribute without
performing auto-detection of PaX on the host. The `paxctl` tool is only
necessary with the older method involving modifying the ELF binary.
This adds a new configure option, --jemalloc-root, which will specify a location
at which libjemalloc_pic.a must live. This library is then used for the build
triple as the jemalloc library to link.
This was required to get ./configure to work on my armv7 test machine.
I haven't found anything sane to feature gate `hf` on that's pokable from the context of the configure script.
It also seems that gcc doesn't work on armv7 by default (rust wants to pass it `-m32` which isn't supported), would it be preferential to make the default `--enable-clang` on arm, or remove the `-m32` flag on that platform?
I mostly tried to remain backwards compatible with old invocations of
the `configure` script; if you do not want to use `CC` et al., you
should not have to; you can keep using `--enable-clang` and/or
`--enable-ccache`.
The overall intention is to capture the following precedences for
guessing the C compiler:
1. Value of `CC` at make invocation time.
2. Value of `CC` at configure invocation time.
3. Compiler inferred at configure invocation time (`gcc` or `clang`).
The strategy is to check (at `configure` time) if each of the
environment variables is set, and if so, save its value in a
corresponding `CFG_` variable (e.g. `CFG_CC`).
Then, in the makefiles, if `CC` is not set but `CFG_CC` is, then we
use the `CFG_CC` setting as `CC`.
Also, I fold the potential user-provided `CFLAGS` and `CXXFLAGS`
values into all of the per-platform `CFLAGS` and `CXXFLAGS` settings.
(This was opposed to adding `$(CFLAGS)` in an ad-hoc manner to various
parts of the mk files.)
Fix#13805.
----
Note that if you try to set the compiler to clang via the `CC` and
`CXX` environment variables, you will probably need to also set
`CXXFLAGS` to `--enable-libcpp` so that LLVM will be configured
properly.
----
Introduce CFG_USING_CLANG, which is distinguished from
CFG_ENABLE_CLANG because the former represents "we think we're using
clang, choose appropriate warning-control options" while the latter
represents "we asked configure (or the host required) that we attempt
to use clang, so check that we have an appropriate version of clang."
The main reason I added this is that I wanted to allow the user to
choose clang via setting the `CC` environment variable, but I did not
want that method of selection to get confused with the user passing
the `--enable-clang` option.
----
A digression: The `configure` script does not infer the compiler
setting if `CC` is set; but if `--enable-clang` was passed, then it
*does* still attempt to validate that the clang version is compatible.
Supporting this required revising `CLANG_VERSION` check to be robust
in face of user-provided `CC` value.
In particular, on Travis, the `CC` is set to `gcc` and so the natural
thing to do is to attempt to use `gcc` as the compiler, but Travis is
also passing `--enable-clang` to configure. So, what is the right
answer in the face of these contradictory requests?
One approach would be to have `--enable-clang` supersede the setting
for `CC` (and instead just call whatever we inferred for `CFG_CLANG`).
That sounds maximally inflexible to me (pnkfelix): a developer
requesting a `CC` value probably wants it respected, and should be
able to set it to something else; it is harder for that developer to
hack our configure script to change its inferred path to clang.
A second approach would be to blindly use the `CC` value but keep
going through the clang version check when `--enable-clang` is turned
on. But on Travis (a Linux host), the `gcc` invocation won't print a
clang version, so we would not get past the CLANG_VERSION check in
that context.
A third approach would be to never run the CLANG_VERSION check if `CC`
is explicitly set. That is not a terrible idea; but if the user uses
`CC` to pass in a path to some other version of clang that they want
to test, probably should still send that through the `CLANG_VERSION`
check.
So in the end I (pnkfelix) took a fourth approach: do the
CLANG_VERSION check if `CC` is unset *or* if `CC` is set to a string
ending with `clang`. This way setting `CC` to things like
`path/to/clang` or `ccache clang` will still go through the
CLANG_VERSION check, while setting `CC` to `gcc` or some unknown
compiler will skip the CLANG_VERSION check (regardless of whether the
user passed --enable-clang to `configure`).
----
Drive-by fixes:
* The call that sets `CFG_CLANG_VERSION` was quoting `"$CFG_CC"` in
its invocation, but that does not play nicely with someone who sets
`$CFG_CC` to e.g. `ccache clang`, since you do not want to intepret
that whole string as a command.
(On the other hand, a path with spaces might need the quoted
invocation. Not sure which one of these corner use-cases is more
important to support.)
* Fix chk_cc error message to point user at `gcc` not `cc`.
This adds a `std::rt::heap` module with a nice allocator API. It's a
step towards fixing #13094 and is a starting point for working on a
generic allocator trait.
The revision used for the jemalloc submodule is the stable 3.6.0 release.
Closes#11807
Compile-fail tests for syntax extensions belong in this suite which has correct
dependencies on all artifacts rather than just the target artifacts.
Closes#13818
