Previously, there was no way to add a custom tool prefix, even if the tool
itself had registered a lint:
```
#![feature(register_tool)]
#![register_tool(xyz)]
#![warn(xyz::my_lint)]
```
```
$ rustc unknown-lint.rs --crate-type lib
error[E0710]: an unknown tool name found in scoped lint: `xyz::my_lint`
--> unknown-lint.rs:3:9
|
3 | #![warn(xyz::my_lint)]
| ^^^
```
This allows opting-in to lints from other tools using `register_tool`.
As far as I can tell what we've been getting is llvm::MaybeAlign(), so
just use that for now. This is required sometime after
24539f1ef2471d07bd87f833cb0288fc0f251f4b.
This changed in 54fb3ca96e261f7107cb1b5778c34cb0e0808be6 - I'm not
entirely sure it's correct that we're leaving config empty, but the one
case in LLVM that looked similar did that.
When cg_llvm encounters the `-Ctarget-cpu=native` it computes an
explciit set of features that applies to the target in order to
correctly compile code for the host CPU (because e.g. `skylake` alone is
not sufficient to tell if some of the instructions are available or
not).
However there were a couple of issues with how we did this. Firstly, the
order in which features were overriden wasn't quite right – conceptually
you'd expect `-Ctarget-cpu=native` option to override the features that
are implicitly set by the target definition. However due to how other
`-Ctarget-cpu` values are handled we must adopt the following order
of priority:
* Features from -Ctarget-cpu=*; are overriden by
* Features implied by --target; are overriden by
* Features from -Ctarget-feature; are overriden by
* function specific features.
Another problem was in that the function level `target-features`
attribute would overwrite the entire set of the globally enabled
features, rather than just the features the
`#[target_feature(enable/disable)]` specified. With something like
`-Ctarget-cpu=native` we'd end up in a situation wherein a function
without `#[target_feature(enable)]` annotation would have a broader
set of features compared to a function with one such attribute. This
turned out to be a cause of heavy run-time regressions in some code
using these function-level attributes in conjunction with
`-Ctarget-cpu=native`, for example.
With this PR rustc is more careful about specifying the entire set of
features for functions that use `#[target_feature(enable/disable)]` or
`#[instruction_set]` attributes.
Sadly testing the original reproducer for this behaviour is quite
impossible – we cannot rely on `-Ctarget-cpu=native` to be anything in
particular on developer or CI machines.
2229: Handle patterns within closures correctly when `capture_disjoint_fields` is enabled
This PR fixes several issues related to handling patterns within closures when `capture_disjoint_fields` is enabled.
1. Matching is always considered a use of the place, even with `_` patterns
2. Compiler ICE when capturing fields in closures through `let` assignments
To do so, we
- Introduced new Fake Reads
- Delayed use of `Place` in favor of `PlaceBuilder`
- Ensured that `PlaceBuilder` can be resolved before attempting to extract `Place` in any of the pattern matching code
Closes rust-lang/project-rfc-2229/issues/27
Closes rust-lang/project-rfc-2229/issues/24
r? `@nikomatsakis`
2229: Handle patterns within closures correctly when `capture_disjoint_fields` is enabled
This PR fixes several issues related to handling patterns within closures when `capture_disjoint_fields` is enabled.
1. Matching is always considered a use of the place, even with `_` patterns
2. Compiler ICE when capturing fields in closures through `let` assignments
To do so, we
- Introduced new Fake Reads
- Delayed use of `Place` in favor of `PlaceBuilder`
- Ensured that `PlaceBuilder` can be resolved before attempting to extract `Place` in any of the pattern matching code
Closes rust-lang/project-rfc-2229/issues/27
Closes rust-lang/project-rfc-2229/issues/24
r? `@nikomatsakis`
Right now, rustdoc users have an unpleasant situation: they can either
use the new tool lint names (`rustdoc::non_autolinks`) or they can use
the old names (`non_autolinks`). If they use the tool lints, they get a
hard error on stable compilers, because rustc rejects all tool names it
doesn't recognize. If they use the old name, they get a warning to
rename the lint to the new name. The only way to compile without
warnings is to add `#[allow(renamed_removed_lints)]`, which defeats the
whole point of the change: we *want* people to switch to the new name.
To avoid people silencing the lint and never migrating to the tool lint,
this avoids warning about the old name, while still allowing you to use
the new name. Once the new `rustdoc` tool name makes it to the stable
channel, we can change these lints to warn again.
This adds the new lint functions `register_alias` and `register_ignored`
- I didn't see an existing way to do this.
Use delay_span_bug instead of panic in layout_scalar_valid_range
#83054 introduced validation of scalar range attributes, but panicking
code that uses the attribute remained reachable. Use `delay_span_bug`
instead to avoid the ICE.
Fixes#83180.
More informative diagnotic from `x.py test` attempt atop beta checkout
Make bootstrap be more informative when one does `x.py test` on a beta checkout without other mods.
To be clear, by default running `x.py test` on a checkout of the beta branch
currently fails, and with this change will continue to fail, because `x.py
tests` runs `x.py test src/tools/tidy` which tries to run `rustfmt` and that
will fail because the `rustfmt` binary is pinned to the current nighlty and we
do not attempt to distribute one for the beta builds.
This change gives a better error message than the current message, which is just
"./x.py fmt is not supported on this channel" without providing any hint about
what one might do about that problem.
Deprecate RustcEncodable and RustcDecodable.
We can't remove the `RustcEncodable` and `RustcDecodable` derive macros from the prelude, but we can deprecate them.
No background for code in portability snippets
This better matches the appearance of this kind of snippet in the full
item view and is less jarring to read due to repeated
foreground-background changes.
![Listing of items in a module with some portability snippets attached to some of the items (light theme). The portability snippet has a light blue background and all of the text in it, monospace or not, is the same colour – black](https://user-images.githubusercontent.com/679122/111196363-1900f500-85b5-11eb-8f97-e283c59002a4.png)
![Listing of items in a module with some portability snippets attached to some of the items (dark theme). The portability snippet has a light blue background and all of the text in it, monospace or not, is the same colour – black](https://user-images.githubusercontent.com/679122/111196366-19998b80-85b5-11eb-9914-4d14d9d13ed3.png)
There should be no observable changes to the ayu theme.
Fall-back to sans-serif if Arial is not available
Otherwise on systems where Arial is not available the UA will
fallback to a serif font, rather than a sans-serif one.
This is especially relevant on acessibility-conscious setups (such as is
mine) that have web-fonts disabled and a limited set of fonts available
on the system.
r? ```@GuillaumeGomez``` cc ```@jsha```
Added `try_exists()` method to `std::path::Path`
This method is similar to the existing `exists()` method, except it
doesn't silently ignore the errors, leading to less error-prone code.
This change intentionally does NOT touch the documentation of `exists()`
nor recommend people to use this method while it's unstable.
Such changes are reserved for stabilization to prevent confusing people.
Apart from that it avoids conflicts with #80979.
`@joshtriplett` requested this PR in [internals discussion](https://internals.rust-lang.org/t/the-api-of-path-exists-encourages-broken-code/13817/25?u=kixunil)
Certain features of Linux (getauxval() and epoll_create1()) are only
available in android SDK/NDK levels 18 and 21 respectively. The 32bit
platform is currently on level 14 for compatibility with Android 4.0.
This patch adds SDK/NDK level 21 to the docker for 32 bit platforms,
while leaving the default setup at level 14.
With this done, projects such as `rustup` which rely on these dockers
can build with modern ecosystem crates such as tokio 1.0, by using
the level 21 toolchain, but those which do not need to switch will
be unaffected, since the level 14 toolchain remains available.
Signed-off-by: Daniel Silverstone <dsilvers@digital-scurf.org>
Allow rustdoc to handle asm! of foreign architectures
This allows rustdoc to process code containing `asm!` for architectures other than the current one. Since this never reaches codegen, we just replace target-specific registers and register classes with a dummy one.
Fixes#82869
StructField -> FieldDef ("field definition")
Field -> ExprField ("expression field", not "field expression")
FieldPat -> PatField ("pattern field", not "field pattern")
Also rename visiting and other methods working on them.
StructField -> FieldDef ("field definition")
Field -> ExprField ("expression field", not "field expression")
FieldPat -> PatField ("pattern field", not "field pattern")
Also rename visiting and other methods working on them.