rework `-Zverbose`
implements the changes described in https://github.com/rust-lang/compiler-team/issues/706
the first commit is only a name change from `-Zverbose` to `-Zverbose-internals` and does not change behavior. the second commit changes diagnostics.
possible follow up work:
- `ty::pretty` could print more info with `--verbose` than it does currently. `-Z verbose-internals` shows too much info in a way that's not helpful to users. michael had ideas about this i didn't fully understand: https://rust-lang.zulipchat.com/#narrow/stream/233931-t-compiler.2Fmajor-changes/topic/uplift.20some.20-Zverbose.20calls.20and.20rename.20to.E2.80.A6.20compiler-team.23706/near/408984200
- `--verbose` should imply `-Z write-long-types-to-disk=no`. the code in `ty_string_with_limit` should take `--verbose` into account (apparently this affects `Ty::sort_string`, i'm not familiar with this code). writing a file to disk should suggest passing `--verbose`.
r? `@compiler-errors` cc `@estebank`
And make all hand-written `IntoDiagnostic` impls generic, by using
`DiagnosticBuilder::new(dcx, level, ...)` instead of e.g.
`dcx.struct_err(...)`.
This means the `create_*` functions are the source of the error level.
This change will let us remove `struct_diagnostic`.
Note: `#[rustc_lint_diagnostics]` is added to `DiagnosticBuilder::new`,
it's necessary to pass diagnostics tests now that it's used in
`into_diagnostic` functions.
Instead of allowing `rustc::potential_query_instability` on the whole
crate we go over each lint and allow it individually if it is safe to
do. Turns out there were no instances of this lint in this crate.
`DefPathData::(ClosureExpr,ImplTrait)` are renamed to match `DefKind::(Closure,OpaqueTy)`.
`DefPathData::ImplTraitAssocTy` is replaced with `DefPathData::TypeNS(kw::Empty)` because both correspond to `DefKind::AssocTy`.
It's possible that introducing `(DefKind,DefPathData)::AssocOpaqueTy` could be a better solution, but that would be a much more invasive change.
Const generic parameters introduced for effects are moved from `DefPathData::TypeNS` to `DefPathData::ValueNS`, because constants are values.
`DefPathData` is no longer passed to `create_def` functions to avoid redundancy.
Remove `-Zperf-stats`.
The included measurements have varied over the years. At one point there were quite a few more, but #49558 deleted a lot that were no longer used. Today there's just four, and it's a motley collection that doesn't seem particularly valuable.
I think it has been well and truly subsumed by self-profiling, which collects way more data.
r? `@wesleywiser`
The included measurements have varied over the years. At one point there
were quite a few more, but #49558 deleted a lot that were no longer
used. Today there's just four, and it's a motley collection that doesn't
seem particularly valuable.
I think it has been well and truly subsumed by self-profiling, which
collects way more data.
- Sort dependencies and features sections.
- Add `tidy` markers to the sorted sections so they stay sorted.
- Remove empty `[lib`] sections.
- Remove "See more keys..." comments.
Excluded files:
- rustc_codegen_{cranelift,gcc}, because they're external.
- rustc_lexer, because it has external use.
- stable_mir, because it has external use.
Remove `rustc_symbol_mangling/messages.ftl`.
It contains a single message that (a) doesn't contain any natural language, and (b) is only used in tests.
r? `@davidtwco`
This simplifies the code by removing all the `self` assignments and
makes the flow of data clearer - always into the printer.
Especially in v0 mangling, which already used `&mut self` in some
places, it gets a lot more uniform.
These are `Self` in almost all printers except one, which can just store
the state as a field instead. This simplifies the printer and allows for
further simplifications, for example using `&mut self` instead of
passing around the printer.
treat host effect params as erased in codegen
This fixes the changes brought to codegen tests when effect params are added to libcore, by not attempting to monomorphize functions that get the host param by being `const fn`.
r? `@oli-obk`
This fixes the changes brought to codegen tests when effect params are
added to libcore, by not attempting to monomorphize functions that get
the host param by being `const fn`.
Fix#115150 by encoding f32 and f64 correctly for cross-language CFI. I
missed changing the encoding for f32 and f64 when I introduced the
integer normalization option in #105452 as integer normalization does
not include floating point. `f32` and `f64` should be always encoded as
`f` and `d` since they are both FFI safe when their representation are
the same (i.e., IEEE 754) for both the Rust compiler and Clang.
make `typeid::typeid_itanium_cxx_abi::transform_ty` evaluate length in array types
the ICE in https://github.com/rust-lang/rust/issues/114275 was caused by `transform_ty`
in compiler/rustc_symbol_mangling/src/typeid/typeid_itanium_cxx_abi.rs encountering an unevaluated const, while expecting it to already be evaluated.
this ICE was caused by `transform_ty`
in compiler/rustc_symbol_mangling/src/typeid/typeid_itanium_cxx_abi.rs
encountering an unevaluated const, while expecting it to already be evaluated.
add a regression test
Update tests/ui/sanitize/issue-114275-cfi-const-expr-in-arry-len.rs
Co-authored-by: Michael Goulet <michael@errs.io>
Update tests/ui/sanitize/issue-114275-cfi-const-expr-in-arry-len.rs
Co-authored-by: Michael Goulet <michael@errs.io>
fix test compiling for targets with -crt-static and failing
this was causign https://github.com/rust-lang/rust/pull/114686 to fail
Each of `{D,Subd}iagnosticMessage::{Str,Eager}` has a comment:
```
// FIXME(davidtwco): can a `Cow<'static, str>` be used here?
```
This commit answers that question in the affirmative. It's not the most
compelling change ever, but it might be worth merging.
This requires changing the `impl<'a> From<&'a str>` impls to `impl
From<&'static str>`, which involves a bunch of knock-on changes that
require/result in call sites being a little more precise about exactly
what kind of string they use to create errors, and not just `&str`. This
will result in fewer unnecessary allocations, though this will not have
any notable perf effects given that these are error paths.
Note that I was lazy within Clippy, using `to_string` in a few places to
preserve the existing string imprecision. I could have used `impl
Into<{D,Subd}iagnosticMessage>` in various places as is done in the
compiler, but that would have required changes to *many* call sites
(mostly changing `&format("...")` to `format!("...")`) which didn't seem
worthwhile.
CFI: Fix encode_region: unexpected ReEarlyBound(0, 'a)
Fixes#111515 and complements #106547 by adding support for encoding early bound regions and also excluding projections when transforming trait objects' traits into their identities before emitting type checks.
Pretty-print inherent projections correctly
Previously, we were trying to pretty-print inherent projections with `Printer::print_def_path` which is incorrect since
it expects the substitutions to be of a certain format (parents substs followed by own substs) which doesn't hold for
inherent projections (self type subst followed by own substs).
Now we print inherent projections manually.
Fixes#111390.
Fixes#111397.
Lacking tests! Is there a test suite / compiletest flags for the pretty-printer? In most if not all cases,
inherent projections are normalized away before they get the chance to appear in diagnostics.
If I were to create regression tests for linked issues, they would need to be `mir-opt` tests to exercise
`-Zdump-mir=all` (right?) which doesn't feel quite adequate to me.
`@rustbot` label F-inherent_associated_types
Fixes#111515 and complements #106547 by adding support for encoding
early bound regions and also excluding projections when transforming
trait objects' traits into their identities before emitting type checks.
CFI: Fix encode_ty: unexpected Param(B/#1)
Fixes#111510 and complements #106547 by adding support for encoding type parameters and also by transforming trait objects' traits into their identities before emitting type checks.
Fixes#111510 and complements #106547 by adding support for encoding
type parameters and also by transforming trait objects' traits into
their identities before emitting type checks.
Add cross-language LLVM CFI support to the Rust compiler
This PR adds cross-language LLVM Control Flow Integrity (CFI) support to the Rust compiler by adding the `-Zsanitizer-cfi-normalize-integers` option to be used with Clang `-fsanitize-cfi-icall-normalize-integers` for normalizing integer types (see https://reviews.llvm.org/D139395).
It provides forward-edge control flow protection for C or C++ and Rust -compiled code "mixed binaries" (i.e., for when C or C++ and Rust -compiled code share the same virtual address space). For more information about LLVM CFI and cross-language LLVM CFI support for the Rust compiler, see design document in the tracking issue #89653.
Cross-language LLVM CFI can be enabled with -Zsanitizer=cfi and -Zsanitizer-cfi-normalize-integers, and requires proper (i.e., non-rustc) LTO (i.e., -Clinker-plugin-lto).
Thank you again, ``@bjorn3,`` ``@nikic,`` ``@samitolvanen,`` and the Rust community for all the help!
This commit adds cross-language LLVM Control Flow Integrity (CFI)
support to the Rust compiler by adding the
`-Zsanitizer-cfi-normalize-integers` option to be used with Clang
`-fsanitize-cfi-icall-normalize-integers` for normalizing integer types
(see https://reviews.llvm.org/D139395).
It provides forward-edge control flow protection for C or C++ and Rust
-compiled code "mixed binaries" (i.e., for when C or C++ and Rust
-compiled code share the same virtual address space). For more
information about LLVM CFI and cross-language LLVM CFI support for the
Rust compiler, see design document in the tracking issue #89653.
Cross-language LLVM CFI can be enabled with -Zsanitizer=cfi and
-Zsanitizer-cfi-normalize-integers, and requires proper (i.e.,
non-rustc) LTO (i.e., -Clinker-plugin-lto).
Add `rustc_fluent_macro` to decouple fluent from `rustc_macros`
Fluent, with all the icu4x it brings in, takes quite some time to compile. `fluent_messages!` is only needed in further downstream rustc crates, but is blocking more upstream crates like `rustc_index`. By splitting it out, we allow `rustc_macros` to be compiled earlier, which speeds up `x check compiler` by about 5 seconds (and even more after the needless dependency on `serde_json` is removed from `rustc_data_structures`).
Fluent, with all the icu4x it brings in, takes quite some time to
compile. `fluent_messages!` is only needed in further downstream rustc
crates, but is blocking more upstream crates like `rustc_index`. By
splitting it out, we allow `rustc_macros` to be compiled earlier, which
speeds up `x check compiler` by about 5 seconds (and even more after the
needless dependency on `serde_json` is removed from
`rustc_data_structures`).
This makes it easier to open the messages file while developing on features.
The commit was the result of automatted changes:
for p in compiler/rustc_*; do mv $p/locales/en-US.ftl $p/messages.ftl; rmdir $p/locales; done
for p in compiler/rustc_*; do sed -i "s#\.\./locales/en-US.ftl#../messages.ftl#" $p/src/lib.rs; done
(This is a large commit. The changes to
`compiler/rustc_middle/src/ty/context.rs` are the most important ones.)
The current naming scheme is a mess, with a mix of `_intern_`, `intern_`
and `mk_` prefixes, with little consistency. In particular, in many
cases it's easy to use an iterator interner when a (preferable) slice
interner is available.
The guiding principles of the new naming system:
- No `_intern_` prefixes.
- The `intern_` prefix is for internal operations.
- The `mk_` prefix is for external operations.
- For cases where there is a slice interner and an iterator interner,
the former is `mk_foo` and the latter is `mk_foo_from_iter`.
Also, `slice_interners!` and `direct_interners!` can now be `pub` or
non-`pub`, which helps enforce the internal/external operations
division.
It's not perfect, but I think it's a clear improvement.
The following lists show everything that was renamed.
slice_interners
- const_list
- mk_const_list -> mk_const_list_from_iter
- intern_const_list -> mk_const_list
- substs
- mk_substs -> mk_substs_from_iter
- intern_substs -> mk_substs
- check_substs -> check_and_mk_substs (this is a weird one)
- canonical_var_infos
- intern_canonical_var_infos -> mk_canonical_var_infos
- poly_existential_predicates
- mk_poly_existential_predicates -> mk_poly_existential_predicates_from_iter
- intern_poly_existential_predicates -> mk_poly_existential_predicates
- _intern_poly_existential_predicates -> intern_poly_existential_predicates
- predicates
- mk_predicates -> mk_predicates_from_iter
- intern_predicates -> mk_predicates
- _intern_predicates -> intern_predicates
- projs
- intern_projs -> mk_projs
- place_elems
- mk_place_elems -> mk_place_elems_from_iter
- intern_place_elems -> mk_place_elems
- bound_variable_kinds
- mk_bound_variable_kinds -> mk_bound_variable_kinds_from_iter
- intern_bound_variable_kinds -> mk_bound_variable_kinds
direct_interners
- region
- intern_region (unchanged)
- const
- mk_const_internal -> intern_const
- const_allocation
- intern_const_alloc -> mk_const_alloc
- layout
- intern_layout -> mk_layout
- adt_def
- intern_adt_def -> mk_adt_def_from_data (unusual case, hard to avoid)
- alloc_adt_def(!) -> mk_adt_def
- external_constraints
- intern_external_constraints -> mk_external_constraints
Other
- type_list
- mk_type_list -> mk_type_list_from_iter
- intern_type_list -> mk_type_list
- tup
- mk_tup -> mk_tup_from_iter
- intern_tup -> mk_tup
Remove type-traversal trait aliases
#107924 moved the type traversal (folding and visiting) traits into the type library, but created trait aliases in `rustc_middle` to minimise both the API churn for trait consumers and the arising boilerplate. As mentioned in that PR, an alternative approach of defining subtraits with blanket implementations of the respective supertraits was also considered at that time but was ruled out as not adding much value.
Unfortunately, it has since emerged that rust-analyzer has difficulty with these trait aliases at present, resulting in a degraded contributor experience (see the recent [r-a has become useless](https://rust-lang.zulipchat.com/#narrow/stream/182449-t-compiler.2Fhelp/topic/r-a.20has.20become.20useless) topic on the #t-compiler/help Zulip stream).
This PR removes the trait aliases, and accordingly the underlying type library traits are now used directly; they are parameterised by `TyCtxt<'tcx>` rather than just the `'tcx` lifetime, and imports have been updated to reflect the fact that the trait aliases' explicitly named traits are no longer automatically brought into scope. These changes also roll-back the (no-longer required) workarounds to #107747 that were made in b409329c62.
Since this PR is just a find+replace together with the changes necessary for compilation & tidy to pass, it's currently just one mega-commit. Let me know if you'd like it broken up.
r? `@oli-obk`
Instead of loading the Fluent resources for every crate in
`rustc_error_messages`, each crate generates typed identifiers for its
own diagnostics and creates a static which are pulled together in the
`rustc_driver` crate and provided to the diagnostic emitter.
Signed-off-by: David Wood <david.wood@huawei.com>
Add rpitit queries
This is part of the changes we are making to lower RPITITs as an associated type. The rest of the stuff will follow under a `-Z` flag.
I still need to add comments to the code, explain stuff and also I'd need to avoid encoding in metadata when rpitit queries return `&[]`
r? `@compiler-errors`
`InternIteratorElement` is a trait used to intern values produces by
iterators. There are three impls, corresponding to iterators that
produce different types:
- One for `T`, which operates straightforwardly.
- One for `Result<T, E>`, which is fallible, and will fail early with an
error result if any of the iterator elements are errors.
- One for `&'a T`, which clones the items as it iterates.
That last one is bad: it's extremely easy to use it without realizing
that it clones, which goes against Rust's normal "explicit is better"
approach to cloning.
So this commit just removes it. In practice, there weren't many use
sites. For all but one of them `into_iter()` could be used, which avoids
the need for cloning. And for the one remaining case `copied()` is
used.
There are several `mk_foo`/`intern_foo` pairs, where the former takes an
iterator and the latter takes a slice. (This naming convention is bad,
but that's a fix for another PR.)
This commit changes several `mk_foo` occurrences into `intern_foo`,
avoiding the need for some `.iter()`/`.into_iter()` calls. Affected
cases:
- mk_type_list
- mk_tup
- mk_substs
- mk_const_list
Convert all the crates that have had their diagnostic migration
completed (except save_analysis because that will be deleted soon and
apfloat because of the licensing problem).
Monomorphise `#[repr(transparent)]` parameterized ADTs before turning
them into an Itanium mangled String.
`#[repr(transparent)]` ADTs currently use the single field to represent
them in their CFI type ID to ensure that they are compatible. However,
if that type involves a type parameter instantiated at the ADT level, as
in `ManuallyDrop`, this will currently ICE as the `Parameter` type
cannot be mangled. Since this happens at lowering time, it should always
be concrete after substitution.
Fixes#106230
Add LLVM KCFI support to the Rust compiler
This PR adds LLVM Kernel Control Flow Integrity (KCFI) support to the Rust compiler. It initially provides forward-edge control flow protection for operating systems kernels for Rust-compiled code only by aggregating function pointers in groups identified by their return and parameter types. (See llvm/llvm-project@cff5bef.)
Forward-edge control flow protection for C or C++ and Rust -compiled code "mixed binaries" (i.e., for when C or C++ and Rust -compiled code share the same virtual address space) will be provided in later work as part of this project by identifying C char and integer type uses at the time types are encoded (see Type metadata in the design document in the tracking issue #89653).
LLVM KCFI can be enabled with -Zsanitizer=kcfi.
Thank you again, `@bjorn3,` `@eddyb,` `@nagisa,` and `@ojeda,` for all the help!
This commit adds LLVM Kernel Control Flow Integrity (KCFI) support to
the Rust compiler. It initially provides forward-edge control flow
protection for operating systems kernels for Rust-compiled code only by
aggregating function pointers in groups identified by their return and
parameter types. (See llvm/llvm-project@cff5bef.)
Forward-edge control flow protection for C or C++ and Rust -compiled
code "mixed binaries" (i.e., for when C or C++ and Rust -compiled code
share the same virtual address space) will be provided in later work as
part of this project by identifying C char and integer type uses at the
time types are encoded (see Type metadata in the design document in the
tracking issue #89653).
LLVM KCFI can be enabled with -Zsanitizer=kcfi.
Co-authored-by: bjorn3 <17426603+bjorn3@users.noreply.github.com>
Initial pass at expr/abstract const/s
Address comments
Switch to using a list instead of &[ty::Const], rm `AbstractConst`
Remove try_unify_abstract_consts
Update comments
Add edits
Recurse more
More edits
Prevent equating associated consts
Move failing test to ui
Changes this test from incremental to ui, and mark it as failing and a known bug.
Does not cause the compiler to ICE, so should be ok.
spastorino noticed some silly expressions like `item_id.def_id.def_id`.
This commit renames several `def_id: OwnerId` fields as `owner_id`, so
those expressions become `item_id.owner_id.def_id`.
`item_id.owner_id.local_def_id` would be even clearer, but the use of
`def_id` for values of type `LocalDefId` is *very* widespread, so I left
that alone.
fix a ui test
use `into`
fix clippy ui test
fix a run-make-fulldeps test
implement `IntoQueryParam<DefId>` for `OwnerId`
use `OwnerId` for more queries
change the type of `ParentOwnerIterator::Item` to `(OwnerId, OwnerNode)`
Thought of doing this by having a struct and an enum with Default and Alt cases, but not sure if we wanted to have the text in code instead of having “demangling()” and “demangling-alt()” in the ftl file.
Don’t like the current way of having structs representing the same-ish and using long names to distinguish their expectations, instead of putting this in an enum and handling the different cases inside the type.
I am fine with whichever option the team prefers; also understand having them as separate structs keeps it simple.
Add fine-grained LLVM CFI support to the Rust compiler
This PR improves the LLVM Control Flow Integrity (CFI) support in the Rust compiler by providing forward-edge control flow protection for Rust-compiled code only by aggregating function pointers in groups identified by their return and parameter types.
Forward-edge control flow protection for C or C++ and Rust -compiled code "mixed binaries" (i.e., for when C or C++ and Rust -compiled code share the same virtual address space) will be provided in later work as part of this project by identifying C char and integer type uses at the time types are encoded (see Type metadata in the design document in the tracking issue https://github.com/rust-lang/rust/issues/89653).
LLVM CFI can be enabled with -Zsanitizer=cfi and requires LTO (i.e., -Clto).
Thank you again, `@eddyb,` `@nagisa,` `@pcc,` and `@tmiasko` for all the help!
This commit improves the LLVM Control Flow Integrity (CFI) support in
the Rust compiler by providing forward-edge control flow protection for
Rust-compiled code only by aggregating function pointers in groups
identified by their return and parameter types.
Forward-edge control flow protection for C or C++ and Rust -compiled
code "mixed binaries" (i.e., for when C or C++ and Rust -compiled code
share the same virtual address space) will be provided in later work as
part of this project by identifying C char and integer type uses at the
time types are encoded (see Type metadata in the design document in the
tracking issue #89653).
LLVM CFI can be enabled with -Zsanitizer=cfi and requires LTO (i.e.,
-Clto).
