From 994d11ace9b325ad3d32271ca86983112df5868f Mon Sep 17 00:00:00 2001 From: henrispriet Date: Thu, 21 Dec 2023 16:27:07 +0100 Subject: [PATCH] Move section "Installing from Source" to seperate file --- .reuse/dep5 | 1 + INSTALL.md | 253 ++++++++++++++++++++++++++++++++++++++++++++++++++++ README.md | 253 +--------------------------------------------------- 3 files changed, 256 insertions(+), 251 deletions(-) create mode 100644 INSTALL.md diff --git a/.reuse/dep5 b/.reuse/dep5 index e62e3504090..10ea8bcc49f 100644 --- a/.reuse/dep5 +++ b/.reuse/dep5 @@ -18,6 +18,7 @@ Files: compiler/* configure CONTRIBUTING.md COPYRIGHT + INSTALL.md LICENSE-APACHE LICENSE-MIT README.md diff --git a/INSTALL.md b/INSTALL.md new file mode 100644 index 00000000000..b872d317e36 --- /dev/null +++ b/INSTALL.md @@ -0,0 +1,253 @@ +# Installing from Source + +**Note: This document describes _building_ Rust _from source_. +This is _not recommended_ if you don't know what you're doing. +If you just want to install Rust, check out the [README.md](README.md) instead.** + +The Rust build system uses a Python script called `x.py` to build the compiler, +which manages the bootstrapping process. It lives at the root of the project. +It also uses a file named `config.toml` to determine various configuration +settings for the build. You can see a full list of options in +`config.example.toml`. + +The `x.py` command can be run directly on most Unix systems in the following +format: + +```sh +./x.py [flags] +``` + +This is how the documentation and examples assume you are running `x.py`. +See the [rustc dev guide][rustcguidebuild] if this does not work on your +platform. + +More information about `x.py` can be found by running it with the `--help` flag +or reading the [rustc dev guide][rustcguidebuild]. + +[gettingstarted]: https://rustc-dev-guide.rust-lang.org/getting-started.html +[rustcguidebuild]: https://rustc-dev-guide.rust-lang.org/building/how-to-build-and-run.html#what-is-xpy + +## Dependencies + +Make sure you have installed the dependencies: + +* `python` 3 or 2.7 +* `git` +* A C compiler (when building for the host, `cc` is enough; cross-compiling may + need additional compilers) +* `curl` (not needed on Windows) +* `pkg-config` if you are compiling on Linux and targeting Linux +* `libiconv` (already included with glibc on Debian-based distros) + +To build Cargo, you'll also need OpenSSL (`libssl-dev` or `openssl-devel` on +most Unix distros). + +If building LLVM from source, you'll need additional tools: + +* `g++`, `clang++`, or MSVC with versions listed on + [LLVM's documentation](https://llvm.org/docs/GettingStarted.html#host-c-toolchain-both-compiler-and-standard-library) +* `ninja`, or GNU `make` 3.81 or later (Ninja is recommended, especially on + Windows) +* `cmake` 3.13.4 or later +* `libstdc++-static` may be required on some Linux distributions such as Fedora + and Ubuntu + +On tier 1 or tier 2 with host tools platforms, you can also choose to download +LLVM by setting `llvm.download-ci-llvm = true`. +Otherwise, you'll need LLVM installed and `llvm-config` in your path. +See [the rustc-dev-guide for more info][sysllvm]. + +[sysllvm]: https://rustc-dev-guide.rust-lang.org/building/new-target.html#using-pre-built-llvm + + +## Building on a Unix-like system + +### Build steps + +1. Clone the [source] with `git`: + + ```sh + git clone https://github.com/rust-lang/rust.git + cd rust + ``` + +[source]: https://github.com/rust-lang/rust + +2. Configure the build settings: + + ```sh + ./configure + ``` + + If you plan to use `x.py install` to create an installation, it is + recommended that you set the `prefix` value in the `[install]` section to a + directory: `./configure --set install.prefix=` + +3. Build and install: + + ```sh + ./x.py build && ./x.py install + ``` + + When complete, `./x.py install` will place several programs into + `$PREFIX/bin`: `rustc`, the Rust compiler, and `rustdoc`, the + API-documentation tool. By default, it will also include [Cargo], Rust's + package manager. You can disable this behavior by passing + `--set build.extended=false` to `./configure`. + +[Cargo]: https://github.com/rust-lang/cargo + +### Configure and Make + +This project provides a configure script and makefile (the latter of which just +invokes `x.py`). `./configure` is the recommended way to programmatically +generate a `config.toml`. `make` is not recommended (we suggest using `x.py` +directly), but it is supported and we try not to break it unnecessarily. + +```sh +./configure +make && sudo make install +``` + +`configure` generates a `config.toml` which can also be used with normal `x.py` +invocations. + +## Building on Windows + +On Windows, we suggest using [winget] to install dependencies by running the +following in a terminal: + +```powershell +winget install -e Python.Python.3 +winget install -e Kitware.CMake +winget install -e Git.Git +``` + +Then edit your system's `PATH` variable and add: `C:\Program Files\CMake\bin`. +See +[this guide on editing the system `PATH`](https://www.java.com/en/download/help/path.html) +from the Java documentation. + +[winget]: https://github.com/microsoft/winget-cli + +There are two prominent ABIs in use on Windows: the native (MSVC) ABI used by +Visual Studio and the GNU ABI used by the GCC toolchain. Which version of Rust +you need depends largely on what C/C++ libraries you want to interoperate with. +Use the MSVC build of Rust to interop with software produced by Visual Studio +and the GNU build to interop with GNU software built using the MinGW/MSYS2 +toolchain. + +### MinGW + +[MSYS2][msys2] can be used to easily build Rust on Windows: + +[msys2]: https://www.msys2.org/ + +1. Download the latest [MSYS2 installer][msys2] and go through the installer. + +2. Run `mingw32_shell.bat` or `mingw64_shell.bat` from the MSYS2 installation + directory (e.g. `C:\msys64`), depending on whether you want 32-bit or 64-bit + Rust. (As of the latest version of MSYS2 you have to run `msys2_shell.cmd + -mingw32` or `msys2_shell.cmd -mingw64` from the command line instead.) + +3. From this terminal, install the required tools: + + ```sh + # Update package mirrors (may be needed if you have a fresh install of MSYS2) + pacman -Sy pacman-mirrors + + # Install build tools needed for Rust. If you're building a 32-bit compiler, + # then replace "x86_64" below with "i686". If you've already got Git, Python, + # or CMake installed and in PATH you can remove them from this list. + # Note that it is important that you do **not** use the 'python2', 'cmake', + # and 'ninja' packages from the 'msys2' subsystem. + # The build has historically been known to fail with these packages. + pacman -S git \ + make \ + diffutils \ + tar \ + mingw-w64-x86_64-python \ + mingw-w64-x86_64-cmake \ + mingw-w64-x86_64-gcc \ + mingw-w64-x86_64-ninja + ``` + +4. Navigate to Rust's source code (or clone it), then build it: + + ```sh + python x.py setup user && python x.py build && python x.py install + ``` + +### MSVC + +MSVC builds of Rust additionally require an installation of Visual Studio 2017 +(or later) so `rustc` can use its linker. The simplest way is to get +[Visual Studio], check the "C++ build tools" and "Windows 10 SDK" workload. + +[Visual Studio]: https://visualstudio.microsoft.com/downloads/ + +(If you're installing CMake yourself, be careful that "C++ CMake tools for +Windows" doesn't get included under "Individual components".) + +With these dependencies installed, you can build the compiler in a `cmd.exe` +shell with: + +```sh +python x.py setup user +python x.py build +``` + +Right now, building Rust only works with some known versions of Visual Studio. +If you have a more recent version installed and the build system doesn't +understand, you may need to force rustbuild to use an older version. +This can be done by manually calling the appropriate vcvars file before running +the bootstrap. + +```batch +CALL "C:\Program Files (x86)\Microsoft Visual Studio\2019\Community\VC\Auxiliary\Build\vcvars64.bat" +python x.py build +``` + +### Specifying an ABI + +Each specific ABI can also be used from either environment (for example, using +the GNU ABI in PowerShell) by using an explicit build triple. The available +Windows build triples are: +- GNU ABI (using GCC) + - `i686-pc-windows-gnu` + - `x86_64-pc-windows-gnu` +- The MSVC ABI + - `i686-pc-windows-msvc` + - `x86_64-pc-windows-msvc` + +The build triple can be specified by either specifying `--build=` when +invoking `x.py` commands, or by creating a `config.toml` file (as described in +[Building on a Unix-like system](#building-on-a-unix-like-system)), and passing +`--set build.build=` to `./configure`. + +## Building Documentation + +If you'd like to build the documentation, it's almost the same: + +```sh +./x.py doc +``` + +The generated documentation will appear under `doc` in the `build` directory for +the ABI used. That is, if the ABI was `x86_64-pc-windows-msvc`, the directory +will be `build\x86_64-pc-windows-msvc\doc`. + +## Notes + +Since the Rust compiler is written in Rust, it must be built by a precompiled +"snapshot" version of itself (made in an earlier stage of development). +As such, source builds require an Internet connection to fetch snapshots, and an +OS that can execute the available snapshot binaries. + +See https://doc.rust-lang.org/nightly/rustc/platform-support.html for a list of +supported platforms. +Only "host tools" platforms have a pre-compiled snapshot binary available; to +compile for a platform without host tools you must cross-compile. + +You may find that other platforms work, but these are our officially supported +build environments that are most likely to work. diff --git a/README.md b/README.md index 5d5beaf1b7a..da9e3556b4c 100644 --- a/README.md +++ b/README.md @@ -15,9 +15,6 @@ If you wish to _contribute_ to the compiler, you should read Table of Contents - [Quick Start](#quick-start) -- [Installing from Source](#installing-from-source) -- [Building Documentation](#building-documentation) -- [Notes](#notes) - [Getting Help](#getting-help) - [Contributing](#contributing) - [License](#license) @@ -32,255 +29,9 @@ Read ["Installation"] from [The Book]. ["Installation"]: https://doc.rust-lang.org/book/ch01-01-installation.html [The Book]: https://doc.rust-lang.org/book/index.html -## Installing from Source +## Installing from source -The Rust build system uses a Python script called `x.py` to build the compiler, -which manages the bootstrapping process. It lives at the root of the project. -It also uses a file named `config.toml` to determine various configuration -settings for the build. You can see a full list of options in -`config.example.toml`. - -The `x.py` command can be run directly on most Unix systems in the following -format: - -```sh -./x.py [flags] -``` - -This is how the documentation and examples assume you are running `x.py`. -See the [rustc dev guide][rustcguidebuild] if this does not work on your -platform. - -More information about `x.py` can be found by running it with the `--help` flag -or reading the [rustc dev guide][rustcguidebuild]. - -[gettingstarted]: https://rustc-dev-guide.rust-lang.org/getting-started.html -[rustcguidebuild]: https://rustc-dev-guide.rust-lang.org/building/how-to-build-and-run.html#what-is-xpy - -### Dependencies - -Make sure you have installed the dependencies: - -* `python` 3 or 2.7 -* `git` -* A C compiler (when building for the host, `cc` is enough; cross-compiling may - need additional compilers) -* `curl` (not needed on Windows) -* `pkg-config` if you are compiling on Linux and targeting Linux -* `libiconv` (already included with glibc on Debian-based distros) - -To build Cargo, you'll also need OpenSSL (`libssl-dev` or `openssl-devel` on -most Unix distros). - -If building LLVM from source, you'll need additional tools: - -* `g++`, `clang++`, or MSVC with versions listed on - [LLVM's documentation](https://llvm.org/docs/GettingStarted.html#host-c-toolchain-both-compiler-and-standard-library) -* `ninja`, or GNU `make` 3.81 or later (Ninja is recommended, especially on - Windows) -* `cmake` 3.13.4 or later -* `libstdc++-static` may be required on some Linux distributions such as Fedora - and Ubuntu - -On tier 1 or tier 2 with host tools platforms, you can also choose to download -LLVM by setting `llvm.download-ci-llvm = true`. -Otherwise, you'll need LLVM installed and `llvm-config` in your path. -See [the rustc-dev-guide for more info][sysllvm]. - -[sysllvm]: https://rustc-dev-guide.rust-lang.org/building/new-target.html#using-pre-built-llvm - - -### Building on a Unix-like system - -#### Build steps - -1. Clone the [source] with `git`: - - ```sh - git clone https://github.com/rust-lang/rust.git - cd rust - ``` - -[source]: https://github.com/rust-lang/rust - -2. Configure the build settings: - - ```sh - ./configure - ``` - - If you plan to use `x.py install` to create an installation, it is - recommended that you set the `prefix` value in the `[install]` section to a - directory: `./configure --set install.prefix=` - -3. Build and install: - - ```sh - ./x.py build && ./x.py install - ``` - - When complete, `./x.py install` will place several programs into - `$PREFIX/bin`: `rustc`, the Rust compiler, and `rustdoc`, the - API-documentation tool. By default, it will also include [Cargo], Rust's - package manager. You can disable this behavior by passing - `--set build.extended=false` to `./configure`. - -[Cargo]: https://github.com/rust-lang/cargo - -#### Configure and Make - -This project provides a configure script and makefile (the latter of which just -invokes `x.py`). `./configure` is the recommended way to programmatically -generate a `config.toml`. `make` is not recommended (we suggest using `x.py` -directly), but it is supported and we try not to break it unnecessarily. - -```sh -./configure -make && sudo make install -``` - -`configure` generates a `config.toml` which can also be used with normal `x.py` -invocations. - -### Building on Windows - -On Windows, we suggest using [winget] to install dependencies by running the -following in a terminal: - -```powershell -winget install -e Python.Python.3 -winget install -e Kitware.CMake -winget install -e Git.Git -``` - -Then edit your system's `PATH` variable and add: `C:\Program Files\CMake\bin`. -See -[this guide on editing the system `PATH`](https://www.java.com/en/download/help/path.html) -from the Java documentation. - -[winget]: https://github.com/microsoft/winget-cli - -There are two prominent ABIs in use on Windows: the native (MSVC) ABI used by -Visual Studio and the GNU ABI used by the GCC toolchain. Which version of Rust -you need depends largely on what C/C++ libraries you want to interoperate with. -Use the MSVC build of Rust to interop with software produced by Visual Studio -and the GNU build to interop with GNU software built using the MinGW/MSYS2 -toolchain. - -#### MinGW - -[MSYS2][msys2] can be used to easily build Rust on Windows: - -[msys2]: https://www.msys2.org/ - -1. Download the latest [MSYS2 installer][msys2] and go through the installer. - -2. Run `mingw32_shell.bat` or `mingw64_shell.bat` from the MSYS2 installation - directory (e.g. `C:\msys64`), depending on whether you want 32-bit or 64-bit - Rust. (As of the latest version of MSYS2 you have to run `msys2_shell.cmd - -mingw32` or `msys2_shell.cmd -mingw64` from the command line instead.) - -3. From this terminal, install the required tools: - - ```sh - # Update package mirrors (may be needed if you have a fresh install of MSYS2) - pacman -Sy pacman-mirrors - - # Install build tools needed for Rust. If you're building a 32-bit compiler, - # then replace "x86_64" below with "i686". If you've already got Git, Python, - # or CMake installed and in PATH you can remove them from this list. - # Note that it is important that you do **not** use the 'python2', 'cmake', - # and 'ninja' packages from the 'msys2' subsystem. - # The build has historically been known to fail with these packages. - pacman -S git \ - make \ - diffutils \ - tar \ - mingw-w64-x86_64-python \ - mingw-w64-x86_64-cmake \ - mingw-w64-x86_64-gcc \ - mingw-w64-x86_64-ninja - ``` - -4. Navigate to Rust's source code (or clone it), then build it: - - ```sh - python x.py setup user && python x.py build && python x.py install - ``` - -#### MSVC - -MSVC builds of Rust additionally require an installation of Visual Studio 2017 -(or later) so `rustc` can use its linker. The simplest way is to get -[Visual Studio], check the "C++ build tools" and "Windows 10 SDK" workload. - -[Visual Studio]: https://visualstudio.microsoft.com/downloads/ - -(If you're installing CMake yourself, be careful that "C++ CMake tools for -Windows" doesn't get included under "Individual components".) - -With these dependencies installed, you can build the compiler in a `cmd.exe` -shell with: - -```sh -python x.py setup user -python x.py build -``` - -Right now, building Rust only works with some known versions of Visual Studio. -If you have a more recent version installed and the build system doesn't -understand, you may need to force rustbuild to use an older version. -This can be done by manually calling the appropriate vcvars file before running -the bootstrap. - -```batch -CALL "C:\Program Files (x86)\Microsoft Visual Studio\2019\Community\VC\Auxiliary\Build\vcvars64.bat" -python x.py build -``` - -#### Specifying an ABI - -Each specific ABI can also be used from either environment (for example, using -the GNU ABI in PowerShell) by using an explicit build triple. The available -Windows build triples are: -- GNU ABI (using GCC) - - `i686-pc-windows-gnu` - - `x86_64-pc-windows-gnu` -- The MSVC ABI - - `i686-pc-windows-msvc` - - `x86_64-pc-windows-msvc` - -The build triple can be specified by either specifying `--build=` when -invoking `x.py` commands, or by creating a `config.toml` file (as described in -[Building on a Unix-like system](#building-on-a-unix-like-system)), and passing -`--set build.build=` to `./configure`. - -## Building Documentation - -If you'd like to build the documentation, it's almost the same: - -```sh -./x.py doc -``` - -The generated documentation will appear under `doc` in the `build` directory for -the ABI used. That is, if the ABI was `x86_64-pc-windows-msvc`, the directory -will be `build\x86_64-pc-windows-msvc\doc`. - -## Notes - -Since the Rust compiler is written in Rust, it must be built by a precompiled -"snapshot" version of itself (made in an earlier stage of development). -As such, source builds require an Internet connection to fetch snapshots, and an -OS that can execute the available snapshot binaries. - -See https://doc.rust-lang.org/nightly/rustc/platform-support.html for a list of -supported platforms. -Only "host tools" platforms have a pre-compiled snapshot binary available; to -compile for a platform without host tools you must cross-compile. - -You may find that other platforms work, but these are our officially supported -build environments that are most likely to work. +If you really want to install from source (though this is not recommended), see [INSTALL.md](INSTALL.md). ## Getting Help