add bootstrap flag --skip-stage0-validation

This change introduces the --skip-stage0-validation flag,
which permits the use of any desired version of the stage0
compiler without verifying its version.

Signed-off-by: onur-ozkan <work@onurozkan.dev>

src/bootstrap/src/core/config/config.rs

@@ -1275,7 +1275,9 @@ impl Config {
         }
 
         config.initial_rustc = if let Some(rustc) = build.rustc {
-            config.check_build_rustc_version(&rustc);
+            if !flags.skip_stage0_validation {
+                config.check_build_rustc_version(&rustc);
+            }
             PathBuf::from(rustc)
         } else {
             config.download_beta_toolchain();

src/bootstrap/src/core/config/flags.rs

@@ -155,6 +155,9 @@ pub struct Flags {
     /// Enable BOLT link flags
     #[arg(global(true), long)]
     pub enable_bolt_settings: bool,
+    /// Skip stage0 compiler validation
+    #[arg(global(true), long)]
+    pub skip_stage0_validation: bool,
     /// Additional reproducible artifacts that should be added to the reproducible artifacts archive.
     #[arg(global(true), long)]
     pub reproducible_artifact: Vec<String>,

src/etc/completions/x.py.fish

@@ -28,6 +28,7 @@ complete -c x.py -n "__fish_use_subcommand" -l dry-run -d 'dry run; don\'t build
 complete -c x.py -n "__fish_use_subcommand" -l json-output -d 'use message-format=json'
 complete -c x.py -n "__fish_use_subcommand" -l llvm-profile-generate -d 'generate PGO profile with llvm built for rustc'
 complete -c x.py -n "__fish_use_subcommand" -l enable-bolt-settings -d 'Enable BOLT link flags'
+complete -c x.py -n "__fish_use_subcommand" -l skip-stage0-validation -d 'Skip stage0 compiler validation'
 complete -c x.py -n "__fish_use_subcommand" -s h -l help -d 'Print help'
 complete -c x.py -n "__fish_use_subcommand" -f -a "build" -d 'Compile either the compiler or libraries'
 complete -c x.py -n "__fish_use_subcommand" -f -a "check" -d 'Compile either the compiler or libraries, using cargo check'
@@ -73,6 +74,7 @@ complete -c x.py -n "__fish_seen_subcommand_from build" -l dry-run -d 'dry run;
 complete -c x.py -n "__fish_seen_subcommand_from build" -l json-output -d 'use message-format=json'
 complete -c x.py -n "__fish_seen_subcommand_from build" -l llvm-profile-generate -d 'generate PGO profile with llvm built for rustc'
 complete -c x.py -n "__fish_seen_subcommand_from build" -l enable-bolt-settings -d 'Enable BOLT link flags'
+complete -c x.py -n "__fish_seen_subcommand_from build" -l skip-stage0-validation -d 'Skip stage0 compiler validation'
 complete -c x.py -n "__fish_seen_subcommand_from build" -s h -l help -d 'Print help (see more with \'--help\')'
 complete -c x.py -n "__fish_seen_subcommand_from check" -l config -d 'TOML configuration file for build' -r -F
 complete -c x.py -n "__fish_seen_subcommand_from check" -l build-dir -d 'Build directory, overrides `build.build-dir` in `config.toml`' -r -f -a "(__fish_complete_directories)"
@@ -105,6 +107,7 @@ complete -c x.py -n "__fish_seen_subcommand_from check" -l dry-run -d 'dry run;
 complete -c x.py -n "__fish_seen_subcommand_from check" -l json-output -d 'use message-format=json'
 complete -c x.py -n "__fish_seen_subcommand_from check" -l llvm-profile-generate -d 'generate PGO profile with llvm built for rustc'
 complete -c x.py -n "__fish_seen_subcommand_from check" -l enable-bolt-settings -d 'Enable BOLT link flags'
+complete -c x.py -n "__fish_seen_subcommand_from check" -l skip-stage0-validation -d 'Skip stage0 compiler validation'
 complete -c x.py -n "__fish_seen_subcommand_from check" -s h -l help -d 'Print help (see more with \'--help\')'
 complete -c x.py -n "__fish_seen_subcommand_from clippy" -s A -d 'clippy lints to allow' -r
 complete -c x.py -n "__fish_seen_subcommand_from clippy" -s D -d 'clippy lints to deny' -r
@@ -141,6 +144,7 @@ complete -c x.py -n "__fish_seen_subcommand_from clippy" -l dry-run -d 'dry run;
 complete -c x.py -n "__fish_seen_subcommand_from clippy" -l json-output -d 'use message-format=json'
 complete -c x.py -n "__fish_seen_subcommand_from clippy" -l llvm-profile-generate -d 'generate PGO profile with llvm built for rustc'
 complete -c x.py -n "__fish_seen_subcommand_from clippy" -l enable-bolt-settings -d 'Enable BOLT link flags'
+complete -c x.py -n "__fish_seen_subcommand_from clippy" -l skip-stage0-validation -d 'Skip stage0 compiler validation'
 complete -c x.py -n "__fish_seen_subcommand_from clippy" -s h -l help -d 'Print help (see more with \'--help\')'
 complete -c x.py -n "__fish_seen_subcommand_from fix" -l config -d 'TOML configuration file for build' -r -F
 complete -c x.py -n "__fish_seen_subcommand_from fix" -l build-dir -d 'Build directory, overrides `build.build-dir` in `config.toml`' -r -f -a "(__fish_complete_directories)"
@@ -172,6 +176,7 @@ complete -c x.py -n "__fish_seen_subcommand_from fix" -l dry-run -d 'dry run; do
 complete -c x.py -n "__fish_seen_subcommand_from fix" -l json-output -d 'use message-format=json'
 complete -c x.py -n "__fish_seen_subcommand_from fix" -l llvm-profile-generate -d 'generate PGO profile with llvm built for rustc'
 complete -c x.py -n "__fish_seen_subcommand_from fix" -l enable-bolt-settings -d 'Enable BOLT link flags'
+complete -c x.py -n "__fish_seen_subcommand_from fix" -l skip-stage0-validation -d 'Skip stage0 compiler validation'
 complete -c x.py -n "__fish_seen_subcommand_from fix" -s h -l help -d 'Print help (see more with \'--help\')'
 complete -c x.py -n "__fish_seen_subcommand_from fmt" -l config -d 'TOML configuration file for build' -r -F
 complete -c x.py -n "__fish_seen_subcommand_from fmt" -l build-dir -d 'Build directory, overrides `build.build-dir` in `config.toml`' -r -f -a "(__fish_complete_directories)"
@@ -204,6 +209,7 @@ complete -c x.py -n "__fish_seen_subcommand_from fmt" -l dry-run -d 'dry run; do
 complete -c x.py -n "__fish_seen_subcommand_from fmt" -l json-output -d 'use message-format=json'
 complete -c x.py -n "__fish_seen_subcommand_from fmt" -l llvm-profile-generate -d 'generate PGO profile with llvm built for rustc'
 complete -c x.py -n "__fish_seen_subcommand_from fmt" -l enable-bolt-settings -d 'Enable BOLT link flags'
+complete -c x.py -n "__fish_seen_subcommand_from fmt" -l skip-stage0-validation -d 'Skip stage0 compiler validation'
 complete -c x.py -n "__fish_seen_subcommand_from fmt" -s h -l help -d 'Print help (see more with \'--help\')'
 complete -c x.py -n "__fish_seen_subcommand_from doc" -l config -d 'TOML configuration file for build' -r -F
 complete -c x.py -n "__fish_seen_subcommand_from doc" -l build-dir -d 'Build directory, overrides `build.build-dir` in `config.toml`' -r -f -a "(__fish_complete_directories)"
@@ -237,6 +243,7 @@ complete -c x.py -n "__fish_seen_subcommand_from doc" -l dry-run -d 'dry run; do
 complete -c x.py -n "__fish_seen_subcommand_from doc" -l json-output -d 'use message-format=json'
 complete -c x.py -n "__fish_seen_subcommand_from doc" -l llvm-profile-generate -d 'generate PGO profile with llvm built for rustc'
 complete -c x.py -n "__fish_seen_subcommand_from doc" -l enable-bolt-settings -d 'Enable BOLT link flags'
+complete -c x.py -n "__fish_seen_subcommand_from doc" -l skip-stage0-validation -d 'Skip stage0 compiler validation'
 complete -c x.py -n "__fish_seen_subcommand_from doc" -s h -l help -d 'Print help (see more with \'--help\')'
 complete -c x.py -n "__fish_seen_subcommand_from test" -l skip -d 'skips tests matching SUBSTRING, if supported by test tool. May be passed multiple times' -r -F
 complete -c x.py -n "__fish_seen_subcommand_from test" -l test-args -d 'extra arguments to be passed for the test tool being used (e.g. libtest, compiletest or rustdoc)' -r
@@ -281,6 +288,7 @@ complete -c x.py -n "__fish_seen_subcommand_from test" -l dry-run -d 'dry run; d
 complete -c x.py -n "__fish_seen_subcommand_from test" -l json-output -d 'use message-format=json'
 complete -c x.py -n "__fish_seen_subcommand_from test" -l llvm-profile-generate -d 'generate PGO profile with llvm built for rustc'
 complete -c x.py -n "__fish_seen_subcommand_from test" -l enable-bolt-settings -d 'Enable BOLT link flags'
+complete -c x.py -n "__fish_seen_subcommand_from test" -l skip-stage0-validation -d 'Skip stage0 compiler validation'
 complete -c x.py -n "__fish_seen_subcommand_from test" -s h -l help -d 'Print help (see more with \'--help\')'
 complete -c x.py -n "__fish_seen_subcommand_from bench" -l test-args -r
 complete -c x.py -n "__fish_seen_subcommand_from bench" -l config -d 'TOML configuration file for build' -r -F
@@ -313,6 +321,7 @@ complete -c x.py -n "__fish_seen_subcommand_from bench" -l dry-run -d 'dry run;
 complete -c x.py -n "__fish_seen_subcommand_from bench" -l json-output -d 'use message-format=json'
 complete -c x.py -n "__fish_seen_subcommand_from bench" -l llvm-profile-generate -d 'generate PGO profile with llvm built for rustc'
 complete -c x.py -n "__fish_seen_subcommand_from bench" -l enable-bolt-settings -d 'Enable BOLT link flags'
+complete -c x.py -n "__fish_seen_subcommand_from bench" -l skip-stage0-validation -d 'Skip stage0 compiler validation'
 complete -c x.py -n "__fish_seen_subcommand_from bench" -s h -l help -d 'Print help'
 complete -c x.py -n "__fish_seen_subcommand_from clean" -l stage -d 'Clean a specific stage without touching other artifacts. By default, every stage is cleaned if this option is not used' -r
 complete -c x.py -n "__fish_seen_subcommand_from clean" -l config -d 'TOML configuration file for build' -r -F
@@ -345,6 +354,7 @@ complete -c x.py -n "__fish_seen_subcommand_from clean" -l dry-run -d 'dry run;
 complete -c x.py -n "__fish_seen_subcommand_from clean" -l json-output -d 'use message-format=json'
 complete -c x.py -n "__fish_seen_subcommand_from clean" -l llvm-profile-generate -d 'generate PGO profile with llvm built for rustc'
 complete -c x.py -n "__fish_seen_subcommand_from clean" -l enable-bolt-settings -d 'Enable BOLT link flags'
+complete -c x.py -n "__fish_seen_subcommand_from clean" -l skip-stage0-validation -d 'Skip stage0 compiler validation'
 complete -c x.py -n "__fish_seen_subcommand_from clean" -s h -l help -d 'Print help'
 complete -c x.py -n "__fish_seen_subcommand_from dist" -l config -d 'TOML configuration file for build' -r -F
 complete -c x.py -n "__fish_seen_subcommand_from dist" -l build-dir -d 'Build directory, overrides `build.build-dir` in `config.toml`' -r -f -a "(__fish_complete_directories)"
@@ -376,6 +386,7 @@ complete -c x.py -n "__fish_seen_subcommand_from dist" -l dry-run -d 'dry run; d
 complete -c x.py -n "__fish_seen_subcommand_from dist" -l json-output -d 'use message-format=json'
 complete -c x.py -n "__fish_seen_subcommand_from dist" -l llvm-profile-generate -d 'generate PGO profile with llvm built for rustc'
 complete -c x.py -n "__fish_seen_subcommand_from dist" -l enable-bolt-settings -d 'Enable BOLT link flags'
+complete -c x.py -n "__fish_seen_subcommand_from dist" -l skip-stage0-validation -d 'Skip stage0 compiler validation'
 complete -c x.py -n "__fish_seen_subcommand_from dist" -s h -l help -d 'Print help'
 complete -c x.py -n "__fish_seen_subcommand_from install" -l config -d 'TOML configuration file for build' -r -F
 complete -c x.py -n "__fish_seen_subcommand_from install" -l build-dir -d 'Build directory, overrides `build.build-dir` in `config.toml`' -r -f -a "(__fish_complete_directories)"
@@ -407,6 +418,7 @@ complete -c x.py -n "__fish_seen_subcommand_from install" -l dry-run -d 'dry run
 complete -c x.py -n "__fish_seen_subcommand_from install" -l json-output -d 'use message-format=json'
 complete -c x.py -n "__fish_seen_subcommand_from install" -l llvm-profile-generate -d 'generate PGO profile with llvm built for rustc'
 complete -c x.py -n "__fish_seen_subcommand_from install" -l enable-bolt-settings -d 'Enable BOLT link flags'
+complete -c x.py -n "__fish_seen_subcommand_from install" -l skip-stage0-validation -d 'Skip stage0 compiler validation'
 complete -c x.py -n "__fish_seen_subcommand_from install" -s h -l help -d 'Print help'
 complete -c x.py -n "__fish_seen_subcommand_from run" -l args -d 'arguments for the tool' -r
 complete -c x.py -n "__fish_seen_subcommand_from run" -l config -d 'TOML configuration file for build' -r -F
@@ -439,6 +451,7 @@ complete -c x.py -n "__fish_seen_subcommand_from run" -l dry-run -d 'dry run; do
 complete -c x.py -n "__fish_seen_subcommand_from run" -l json-output -d 'use message-format=json'
 complete -c x.py -n "__fish_seen_subcommand_from run" -l llvm-profile-generate -d 'generate PGO profile with llvm built for rustc'
 complete -c x.py -n "__fish_seen_subcommand_from run" -l enable-bolt-settings -d 'Enable BOLT link flags'
+complete -c x.py -n "__fish_seen_subcommand_from run" -l skip-stage0-validation -d 'Skip stage0 compiler validation'
 complete -c x.py -n "__fish_seen_subcommand_from run" -s h -l help -d 'Print help (see more with \'--help\')'
 complete -c x.py -n "__fish_seen_subcommand_from setup" -l config -d 'TOML configuration file for build' -r -F
 complete -c x.py -n "__fish_seen_subcommand_from setup" -l build-dir -d 'Build directory, overrides `build.build-dir` in `config.toml`' -r -f -a "(__fish_complete_directories)"
@@ -470,6 +483,7 @@ complete -c x.py -n "__fish_seen_subcommand_from setup" -l dry-run -d 'dry run;
 complete -c x.py -n "__fish_seen_subcommand_from setup" -l json-output -d 'use message-format=json'
 complete -c x.py -n "__fish_seen_subcommand_from setup" -l llvm-profile-generate -d 'generate PGO profile with llvm built for rustc'
 complete -c x.py -n "__fish_seen_subcommand_from setup" -l enable-bolt-settings -d 'Enable BOLT link flags'
+complete -c x.py -n "__fish_seen_subcommand_from setup" -l skip-stage0-validation -d 'Skip stage0 compiler validation'
 complete -c x.py -n "__fish_seen_subcommand_from setup" -s h -l help -d 'Print help (see more with \'--help\')'
 complete -c x.py -n "__fish_seen_subcommand_from suggest" -l config -d 'TOML configuration file for build' -r -F
 complete -c x.py -n "__fish_seen_subcommand_from suggest" -l build-dir -d 'Build directory, overrides `build.build-dir` in `config.toml`' -r -f -a "(__fish_complete_directories)"
@@ -502,4 +516,5 @@ complete -c x.py -n "__fish_seen_subcommand_from suggest" -l dry-run -d 'dry run
 complete -c x.py -n "__fish_seen_subcommand_from suggest" -l json-output -d 'use message-format=json'
 complete -c x.py -n "__fish_seen_subcommand_from suggest" -l llvm-profile-generate -d 'generate PGO profile with llvm built for rustc'
 complete -c x.py -n "__fish_seen_subcommand_from suggest" -l enable-bolt-settings -d 'Enable BOLT link flags'
+complete -c x.py -n "__fish_seen_subcommand_from suggest" -l skip-stage0-validation -d 'Skip stage0 compiler validation'
 complete -c x.py -n "__fish_seen_subcommand_from suggest" -s h -l help -d 'Print help (see more with \'--help\')'

src/etc/completions/x.py.ps1

@@ -54,6 +54,7 @@ Register-ArgumentCompleter -Native -CommandName 'x.py' -ScriptBlock {
             [CompletionResult]::new('--json-output', 'json-output', [CompletionResultType]::ParameterName, 'use message-format=json')
             [CompletionResult]::new('--llvm-profile-generate', 'llvm-profile-generate', [CompletionResultType]::ParameterName, 'generate PGO profile with llvm built for rustc')
             [CompletionResult]::new('--enable-bolt-settings', 'enable-bolt-settings', [CompletionResultType]::ParameterName, 'Enable BOLT link flags')
+            [CompletionResult]::new('--skip-stage0-validation', 'skip-stage0-validation', [CompletionResultType]::ParameterName, 'Skip stage0 compiler validation')
             [CompletionResult]::new('-h', 'h', [CompletionResultType]::ParameterName, 'Print help')
             [CompletionResult]::new('--help', 'help', [CompletionResultType]::ParameterName, 'Print help')
             [CompletionResult]::new('build', 'build', [CompletionResultType]::ParameterValue, 'Compile either the compiler or libraries')
@@ -106,6 +107,7 @@ Register-ArgumentCompleter -Native -CommandName 'x.py' -ScriptBlock {
             [CompletionResult]::new('--json-output', 'json-output', [CompletionResultType]::ParameterName, 'use message-format=json')
             [CompletionResult]::new('--llvm-profile-generate', 'llvm-profile-generate', [CompletionResultType]::ParameterName, 'generate PGO profile with llvm built for rustc')
             [CompletionResult]::new('--enable-bolt-settings', 'enable-bolt-settings', [CompletionResultType]::ParameterName, 'Enable BOLT link flags')
+            [CompletionResult]::new('--skip-stage0-validation', 'skip-stage0-validation', [CompletionResultType]::ParameterName, 'Skip stage0 compiler validation')
             [CompletionResult]::new('-h', 'h', [CompletionResultType]::ParameterName, 'Print help (see more with ''--help'')')
             [CompletionResult]::new('--help', 'help', [CompletionResultType]::ParameterName, 'Print help (see more with ''--help'')')
             break
@@ -145,6 +147,7 @@ Register-ArgumentCompleter -Native -CommandName 'x.py' -ScriptBlock {
             [CompletionResult]::new('--json-output', 'json-output', [CompletionResultType]::ParameterName, 'use message-format=json')
             [CompletionResult]::new('--llvm-profile-generate', 'llvm-profile-generate', [CompletionResultType]::ParameterName, 'generate PGO profile with llvm built for rustc')
             [CompletionResult]::new('--enable-bolt-settings', 'enable-bolt-settings', [CompletionResultType]::ParameterName, 'Enable BOLT link flags')
+            [CompletionResult]::new('--skip-stage0-validation', 'skip-stage0-validation', [CompletionResultType]::ParameterName, 'Skip stage0 compiler validation')
             [CompletionResult]::new('-h', 'h', [CompletionResultType]::ParameterName, 'Print help (see more with ''--help'')')
             [CompletionResult]::new('--help', 'help', [CompletionResultType]::ParameterName, 'Print help (see more with ''--help'')')
             break
@@ -188,6 +191,7 @@ Register-ArgumentCompleter -Native -CommandName 'x.py' -ScriptBlock {
             [CompletionResult]::new('--json-output', 'json-output', [CompletionResultType]::ParameterName, 'use message-format=json')
             [CompletionResult]::new('--llvm-profile-generate', 'llvm-profile-generate', [CompletionResultType]::ParameterName, 'generate PGO profile with llvm built for rustc')
             [CompletionResult]::new('--enable-bolt-settings', 'enable-bolt-settings', [CompletionResultType]::ParameterName, 'Enable BOLT link flags')
+            [CompletionResult]::new('--skip-stage0-validation', 'skip-stage0-validation', [CompletionResultType]::ParameterName, 'Skip stage0 compiler validation')
             [CompletionResult]::new('-h', 'h', [CompletionResultType]::ParameterName, 'Print help (see more with ''--help'')')
             [CompletionResult]::new('--help', 'help', [CompletionResultType]::ParameterName, 'Print help (see more with ''--help'')')
             break
@@ -226,6 +230,7 @@ Register-ArgumentCompleter -Native -CommandName 'x.py' -ScriptBlock {
             [CompletionResult]::new('--json-output', 'json-output', [CompletionResultType]::ParameterName, 'use message-format=json')
             [CompletionResult]::new('--llvm-profile-generate', 'llvm-profile-generate', [CompletionResultType]::ParameterName, 'generate PGO profile with llvm built for rustc')
             [CompletionResult]::new('--enable-bolt-settings', 'enable-bolt-settings', [CompletionResultType]::ParameterName, 'Enable BOLT link flags')
+            [CompletionResult]::new('--skip-stage0-validation', 'skip-stage0-validation', [CompletionResultType]::ParameterName, 'Skip stage0 compiler validation')
             [CompletionResult]::new('-h', 'h', [CompletionResultType]::ParameterName, 'Print help (see more with ''--help'')')
             [CompletionResult]::new('--help', 'help', [CompletionResultType]::ParameterName, 'Print help (see more with ''--help'')')
             break
@@ -265,6 +270,7 @@ Register-ArgumentCompleter -Native -CommandName 'x.py' -ScriptBlock {
             [CompletionResult]::new('--json-output', 'json-output', [CompletionResultType]::ParameterName, 'use message-format=json')
             [CompletionResult]::new('--llvm-profile-generate', 'llvm-profile-generate', [CompletionResultType]::ParameterName, 'generate PGO profile with llvm built for rustc')
             [CompletionResult]::new('--enable-bolt-settings', 'enable-bolt-settings', [CompletionResultType]::ParameterName, 'Enable BOLT link flags')
+            [CompletionResult]::new('--skip-stage0-validation', 'skip-stage0-validation', [CompletionResultType]::ParameterName, 'Skip stage0 compiler validation')
             [CompletionResult]::new('-h', 'h', [CompletionResultType]::ParameterName, 'Print help (see more with ''--help'')')
             [CompletionResult]::new('--help', 'help', [CompletionResultType]::ParameterName, 'Print help (see more with ''--help'')')
             break
@@ -305,6 +311,7 @@ Register-ArgumentCompleter -Native -CommandName 'x.py' -ScriptBlock {
             [CompletionResult]::new('--json-output', 'json-output', [CompletionResultType]::ParameterName, 'use message-format=json')
             [CompletionResult]::new('--llvm-profile-generate', 'llvm-profile-generate', [CompletionResultType]::ParameterName, 'generate PGO profile with llvm built for rustc')
             [CompletionResult]::new('--enable-bolt-settings', 'enable-bolt-settings', [CompletionResultType]::ParameterName, 'Enable BOLT link flags')
+            [CompletionResult]::new('--skip-stage0-validation', 'skip-stage0-validation', [CompletionResultType]::ParameterName, 'Skip stage0 compiler validation')
             [CompletionResult]::new('-h', 'h', [CompletionResultType]::ParameterName, 'Print help (see more with ''--help'')')
             [CompletionResult]::new('--help', 'help', [CompletionResultType]::ParameterName, 'Print help (see more with ''--help'')')
             break
@@ -356,6 +363,7 @@ Register-ArgumentCompleter -Native -CommandName 'x.py' -ScriptBlock {
             [CompletionResult]::new('--json-output', 'json-output', [CompletionResultType]::ParameterName, 'use message-format=json')
             [CompletionResult]::new('--llvm-profile-generate', 'llvm-profile-generate', [CompletionResultType]::ParameterName, 'generate PGO profile with llvm built for rustc')
             [CompletionResult]::new('--enable-bolt-settings', 'enable-bolt-settings', [CompletionResultType]::ParameterName, 'Enable BOLT link flags')
+            [CompletionResult]::new('--skip-stage0-validation', 'skip-stage0-validation', [CompletionResultType]::ParameterName, 'Skip stage0 compiler validation')
             [CompletionResult]::new('-h', 'h', [CompletionResultType]::ParameterName, 'Print help (see more with ''--help'')')
             [CompletionResult]::new('--help', 'help', [CompletionResultType]::ParameterName, 'Print help (see more with ''--help'')')
             break
@@ -395,6 +403,7 @@ Register-ArgumentCompleter -Native -CommandName 'x.py' -ScriptBlock {
             [CompletionResult]::new('--json-output', 'json-output', [CompletionResultType]::ParameterName, 'use message-format=json')
             [CompletionResult]::new('--llvm-profile-generate', 'llvm-profile-generate', [CompletionResultType]::ParameterName, 'generate PGO profile with llvm built for rustc')
             [CompletionResult]::new('--enable-bolt-settings', 'enable-bolt-settings', [CompletionResultType]::ParameterName, 'Enable BOLT link flags')
+            [CompletionResult]::new('--skip-stage0-validation', 'skip-stage0-validation', [CompletionResultType]::ParameterName, 'Skip stage0 compiler validation')
             [CompletionResult]::new('-h', 'h', [CompletionResultType]::ParameterName, 'Print help')
             [CompletionResult]::new('--help', 'help', [CompletionResultType]::ParameterName, 'Print help')
             break
@@ -434,6 +443,7 @@ Register-ArgumentCompleter -Native -CommandName 'x.py' -ScriptBlock {
             [CompletionResult]::new('--json-output', 'json-output', [CompletionResultType]::ParameterName, 'use message-format=json')
             [CompletionResult]::new('--llvm-profile-generate', 'llvm-profile-generate', [CompletionResultType]::ParameterName, 'generate PGO profile with llvm built for rustc')
             [CompletionResult]::new('--enable-bolt-settings', 'enable-bolt-settings', [CompletionResultType]::ParameterName, 'Enable BOLT link flags')
+            [CompletionResult]::new('--skip-stage0-validation', 'skip-stage0-validation', [CompletionResultType]::ParameterName, 'Skip stage0 compiler validation')
             [CompletionResult]::new('-h', 'h', [CompletionResultType]::ParameterName, 'Print help')
             [CompletionResult]::new('--help', 'help', [CompletionResultType]::ParameterName, 'Print help')
             break
@@ -472,6 +482,7 @@ Register-ArgumentCompleter -Native -CommandName 'x.py' -ScriptBlock {
             [CompletionResult]::new('--json-output', 'json-output', [CompletionResultType]::ParameterName, 'use message-format=json')
             [CompletionResult]::new('--llvm-profile-generate', 'llvm-profile-generate', [CompletionResultType]::ParameterName, 'generate PGO profile with llvm built for rustc')
             [CompletionResult]::new('--enable-bolt-settings', 'enable-bolt-settings', [CompletionResultType]::ParameterName, 'Enable BOLT link flags')
+            [CompletionResult]::new('--skip-stage0-validation', 'skip-stage0-validation', [CompletionResultType]::ParameterName, 'Skip stage0 compiler validation')
             [CompletionResult]::new('-h', 'h', [CompletionResultType]::ParameterName, 'Print help')
             [CompletionResult]::new('--help', 'help', [CompletionResultType]::ParameterName, 'Print help')
             break
@@ -510,6 +521,7 @@ Register-ArgumentCompleter -Native -CommandName 'x.py' -ScriptBlock {
             [CompletionResult]::new('--json-output', 'json-output', [CompletionResultType]::ParameterName, 'use message-format=json')
             [CompletionResult]::new('--llvm-profile-generate', 'llvm-profile-generate', [CompletionResultType]::ParameterName, 'generate PGO profile with llvm built for rustc')
             [CompletionResult]::new('--enable-bolt-settings', 'enable-bolt-settings', [CompletionResultType]::ParameterName, 'Enable BOLT link flags')
+            [CompletionResult]::new('--skip-stage0-validation', 'skip-stage0-validation', [CompletionResultType]::ParameterName, 'Skip stage0 compiler validation')
             [CompletionResult]::new('-h', 'h', [CompletionResultType]::ParameterName, 'Print help')
             [CompletionResult]::new('--help', 'help', [CompletionResultType]::ParameterName, 'Print help')
             break
@@ -549,6 +561,7 @@ Register-ArgumentCompleter -Native -CommandName 'x.py' -ScriptBlock {
             [CompletionResult]::new('--json-output', 'json-output', [CompletionResultType]::ParameterName, 'use message-format=json')
             [CompletionResult]::new('--llvm-profile-generate', 'llvm-profile-generate', [CompletionResultType]::ParameterName, 'generate PGO profile with llvm built for rustc')
             [CompletionResult]::new('--enable-bolt-settings', 'enable-bolt-settings', [CompletionResultType]::ParameterName, 'Enable BOLT link flags')
+            [CompletionResult]::new('--skip-stage0-validation', 'skip-stage0-validation', [CompletionResultType]::ParameterName, 'Skip stage0 compiler validation')
             [CompletionResult]::new('-h', 'h', [CompletionResultType]::ParameterName, 'Print help (see more with ''--help'')')
             [CompletionResult]::new('--help', 'help', [CompletionResultType]::ParameterName, 'Print help (see more with ''--help'')')
             break
@@ -587,6 +600,7 @@ Register-ArgumentCompleter -Native -CommandName 'x.py' -ScriptBlock {
             [CompletionResult]::new('--json-output', 'json-output', [CompletionResultType]::ParameterName, 'use message-format=json')
             [CompletionResult]::new('--llvm-profile-generate', 'llvm-profile-generate', [CompletionResultType]::ParameterName, 'generate PGO profile with llvm built for rustc')
             [CompletionResult]::new('--enable-bolt-settings', 'enable-bolt-settings', [CompletionResultType]::ParameterName, 'Enable BOLT link flags')
+            [CompletionResult]::new('--skip-stage0-validation', 'skip-stage0-validation', [CompletionResultType]::ParameterName, 'Skip stage0 compiler validation')
             [CompletionResult]::new('-h', 'h', [CompletionResultType]::ParameterName, 'Print help (see more with ''--help'')')
             [CompletionResult]::new('--help', 'help', [CompletionResultType]::ParameterName, 'Print help (see more with ''--help'')')
             break
@@ -626,6 +640,7 @@ Register-ArgumentCompleter -Native -CommandName 'x.py' -ScriptBlock {
             [CompletionResult]::new('--json-output', 'json-output', [CompletionResultType]::ParameterName, 'use message-format=json')
             [CompletionResult]::new('--llvm-profile-generate', 'llvm-profile-generate', [CompletionResultType]::ParameterName, 'generate PGO profile with llvm built for rustc')
             [CompletionResult]::new('--enable-bolt-settings', 'enable-bolt-settings', [CompletionResultType]::ParameterName, 'Enable BOLT link flags')
+            [CompletionResult]::new('--skip-stage0-validation', 'skip-stage0-validation', [CompletionResultType]::ParameterName, 'Skip stage0 compiler validation')
             [CompletionResult]::new('-h', 'h', [CompletionResultType]::ParameterName, 'Print help (see more with ''--help'')')
             [CompletionResult]::new('--help', 'help', [CompletionResultType]::ParameterName, 'Print help (see more with ''--help'')')
             break

src/etc/completions/x.py.sh

@@ -61,7 +61,7 @@ _x.py() {
 
     case "${cmd}" in
         x.py)
-            opts="-v -i -j -h --verbose --incremental --config --build-dir --build --host --target --exclude --skip --include-default-paths --rustc-error-format --on-fail --dry-run --stage --keep-stage --keep-stage-std --src --jobs --warnings --error-format --json-output --color --llvm-skip-rebuild --rust-profile-generate --rust-profile-use --llvm-profile-use --llvm-profile-generate --enable-bolt-settings --reproducible-artifact --set --help [PATHS]... [ARGS]... build check clippy fix fmt doc test bench clean dist install run setup suggest"
+            opts="-v -i -j -h --verbose --incremental --config --build-dir --build --host --target --exclude --skip --include-default-paths --rustc-error-format --on-fail --dry-run --stage --keep-stage --keep-stage-std --src --jobs --warnings --error-format --json-output --color --llvm-skip-rebuild --rust-profile-generate --rust-profile-use --llvm-profile-use --llvm-profile-generate --enable-bolt-settings --skip-stage0-validation --reproducible-artifact --set --help [PATHS]... [ARGS]... build check clippy fix fmt doc test bench clean dist install run setup suggest"
             if [[ ${cur} == -* || ${COMP_CWORD} -eq 1 ]] ; then
                 COMPREPLY=( $(compgen -W "${opts}" -- "${cur}") )
                 return 0
@@ -171,7 +171,7 @@ _x.py() {
             return 0
             ;;
         x.py__bench)
-            opts="-v -i -j -h --test-args --verbose --incremental --config --build-dir --build --host --target --exclude --skip --include-default-paths --rustc-error-format --on-fail --dry-run --stage --keep-stage --keep-stage-std --src --jobs --warnings --error-format --json-output --color --llvm-skip-rebuild --rust-profile-generate --rust-profile-use --llvm-profile-use --llvm-profile-generate --enable-bolt-settings --reproducible-artifact --set --help [PATHS]... [ARGS]..."
+            opts="-v -i -j -h --test-args --verbose --incremental --config --build-dir --build --host --target --exclude --skip --include-default-paths --rustc-error-format --on-fail --dry-run --stage --keep-stage --keep-stage-std --src --jobs --warnings --error-format --json-output --color --llvm-skip-rebuild --rust-profile-generate --rust-profile-use --llvm-profile-use --llvm-profile-generate --enable-bolt-settings --skip-stage0-validation --reproducible-artifact --set --help [PATHS]... [ARGS]..."
             if [[ ${cur} == -* || ${COMP_CWORD} -eq 2 ]] ; then
                 COMPREPLY=( $(compgen -W "${opts}" -- "${cur}") )
                 return 0
@@ -285,7 +285,7 @@ _x.py() {
             return 0
             ;;
         x.py__build)
-            opts="-v -i -j -h --verbose --incremental --config --build-dir --build --host --target --exclude --skip --include-default-paths --rustc-error-format --on-fail --dry-run --stage --keep-stage --keep-stage-std --src --jobs --warnings --error-format --json-output --color --llvm-skip-rebuild --rust-profile-generate --rust-profile-use --llvm-profile-use --llvm-profile-generate --enable-bolt-settings --reproducible-artifact --set --help [PATHS]... [ARGS]..."
+            opts="-v -i -j -h --verbose --incremental --config --build-dir --build --host --target --exclude --skip --include-default-paths --rustc-error-format --on-fail --dry-run --stage --keep-stage --keep-stage-std --src --jobs --warnings --error-format --json-output --color --llvm-skip-rebuild --rust-profile-generate --rust-profile-use --llvm-profile-use --llvm-profile-generate --enable-bolt-settings --skip-stage0-validation --reproducible-artifact --set --help [PATHS]... [ARGS]..."
             if [[ ${cur} == -* || ${COMP_CWORD} -eq 2 ]] ; then
                 COMPREPLY=( $(compgen -W "${opts}" -- "${cur}") )
                 return 0
@@ -395,7 +395,7 @@ _x.py() {
             return 0
             ;;
         x.py__check)
-            opts="-v -i -j -h --all-targets --verbose --incremental --config --build-dir --build --host --target --exclude --skip --include-default-paths --rustc-error-format --on-fail --dry-run --stage --keep-stage --keep-stage-std --src --jobs --warnings --error-format --json-output --color --llvm-skip-rebuild --rust-profile-generate --rust-profile-use --llvm-profile-use --llvm-profile-generate --enable-bolt-settings --reproducible-artifact --set --help [PATHS]... [ARGS]..."
+            opts="-v -i -j -h --all-targets --verbose --incremental --config --build-dir --build --host --target --exclude --skip --include-default-paths --rustc-error-format --on-fail --dry-run --stage --keep-stage --keep-stage-std --src --jobs --warnings --error-format --json-output --color --llvm-skip-rebuild --rust-profile-generate --rust-profile-use --llvm-profile-use --llvm-profile-generate --enable-bolt-settings --skip-stage0-validation --reproducible-artifact --set --help [PATHS]... [ARGS]..."
             if [[ ${cur} == -* || ${COMP_CWORD} -eq 2 ]] ; then
                 COMPREPLY=( $(compgen -W "${opts}" -- "${cur}") )
                 return 0
@@ -505,7 +505,7 @@ _x.py() {
             return 0
             ;;
         x.py__clean)
-            opts="-v -i -j -h --all --stage --verbose --incremental --config --build-dir --build --host --target --exclude --skip --include-default-paths --rustc-error-format --on-fail --dry-run --keep-stage --keep-stage-std --src --jobs --warnings --error-format --json-output --color --llvm-skip-rebuild --rust-profile-generate --rust-profile-use --llvm-profile-use --llvm-profile-generate --enable-bolt-settings --reproducible-artifact --set --help [PATHS]... [ARGS]..."
+            opts="-v -i -j -h --all --stage --verbose --incremental --config --build-dir --build --host --target --exclude --skip --include-default-paths --rustc-error-format --on-fail --dry-run --keep-stage --keep-stage-std --src --jobs --warnings --error-format --json-output --color --llvm-skip-rebuild --rust-profile-generate --rust-profile-use --llvm-profile-use --llvm-profile-generate --enable-bolt-settings --skip-stage0-validation --reproducible-artifact --set --help [PATHS]... [ARGS]..."
             if [[ ${cur} == -* || ${COMP_CWORD} -eq 2 ]] ; then
                 COMPREPLY=( $(compgen -W "${opts}" -- "${cur}") )
                 return 0
@@ -615,7 +615,7 @@ _x.py() {
             return 0
             ;;
         x.py__clippy)
-            opts="-A -D -W -F -v -i -j -h --fix --verbose --incremental --config --build-dir --build --host --target --exclude --skip --include-default-paths --rustc-error-format --on-fail --dry-run --stage --keep-stage --keep-stage-std --src --jobs --warnings --error-format --json-output --color --llvm-skip-rebuild --rust-profile-generate --rust-profile-use --llvm-profile-use --llvm-profile-generate --enable-bolt-settings --reproducible-artifact --set --help [PATHS]... [ARGS]..."
+            opts="-A -D -W -F -v -i -j -h --fix --verbose --incremental --config --build-dir --build --host --target --exclude --skip --include-default-paths --rustc-error-format --on-fail --dry-run --stage --keep-stage --keep-stage-std --src --jobs --warnings --error-format --json-output --color --llvm-skip-rebuild --rust-profile-generate --rust-profile-use --llvm-profile-use --llvm-profile-generate --enable-bolt-settings --skip-stage0-validation --reproducible-artifact --set --help [PATHS]... [ARGS]..."
             if [[ ${cur} == -* || ${COMP_CWORD} -eq 2 ]] ; then
                 COMPREPLY=( $(compgen -W "${opts}" -- "${cur}") )
                 return 0
@@ -741,7 +741,7 @@ _x.py() {
             return 0
             ;;
         x.py__dist)
-            opts="-v -i -j -h --verbose --incremental --config --build-dir --build --host --target --exclude --skip --include-default-paths --rustc-error-format --on-fail --dry-run --stage --keep-stage --keep-stage-std --src --jobs --warnings --error-format --json-output --color --llvm-skip-rebuild --rust-profile-generate --rust-profile-use --llvm-profile-use --llvm-profile-generate --enable-bolt-settings --reproducible-artifact --set --help [PATHS]... [ARGS]..."
+            opts="-v -i -j -h --verbose --incremental --config --build-dir --build --host --target --exclude --skip --include-default-paths --rustc-error-format --on-fail --dry-run --stage --keep-stage --keep-stage-std --src --jobs --warnings --error-format --json-output --color --llvm-skip-rebuild --rust-profile-generate --rust-profile-use --llvm-profile-use --llvm-profile-generate --enable-bolt-settings --skip-stage0-validation --reproducible-artifact --set --help [PATHS]... [ARGS]..."
             if [[ ${cur} == -* || ${COMP_CWORD} -eq 2 ]] ; then
                 COMPREPLY=( $(compgen -W "${opts}" -- "${cur}") )
                 return 0
@@ -851,7 +851,7 @@ _x.py() {
             return 0
             ;;
         x.py__doc)
-            opts="-v -i -j -h --open --json --verbose --incremental --config --build-dir --build --host --target --exclude --skip --include-default-paths --rustc-error-format --on-fail --dry-run --stage --keep-stage --keep-stage-std --src --jobs --warnings --error-format --json-output --color --llvm-skip-rebuild --rust-profile-generate --rust-profile-use --llvm-profile-use --llvm-profile-generate --enable-bolt-settings --reproducible-artifact --set --help [PATHS]... [ARGS]..."
+            opts="-v -i -j -h --open --json --verbose --incremental --config --build-dir --build --host --target --exclude --skip --include-default-paths --rustc-error-format --on-fail --dry-run --stage --keep-stage --keep-stage-std --src --jobs --warnings --error-format --json-output --color --llvm-skip-rebuild --rust-profile-generate --rust-profile-use --llvm-profile-use --llvm-profile-generate --enable-bolt-settings --skip-stage0-validation --reproducible-artifact --set --help [PATHS]... [ARGS]..."
             if [[ ${cur} == -* || ${COMP_CWORD} -eq 2 ]] ; then
                 COMPREPLY=( $(compgen -W "${opts}" -- "${cur}") )
                 return 0
@@ -961,7 +961,7 @@ _x.py() {
             return 0
             ;;
         x.py__fix)
-            opts="-v -i -j -h --verbose --incremental --config --build-dir --build --host --target --exclude --skip --include-default-paths --rustc-error-format --on-fail --dry-run --stage --keep-stage --keep-stage-std --src --jobs --warnings --error-format --json-output --color --llvm-skip-rebuild --rust-profile-generate --rust-profile-use --llvm-profile-use --llvm-profile-generate --enable-bolt-settings --reproducible-artifact --set --help [PATHS]... [ARGS]..."
+            opts="-v -i -j -h --verbose --incremental --config --build-dir --build --host --target --exclude --skip --include-default-paths --rustc-error-format --on-fail --dry-run --stage --keep-stage --keep-stage-std --src --jobs --warnings --error-format --json-output --color --llvm-skip-rebuild --rust-profile-generate --rust-profile-use --llvm-profile-use --llvm-profile-generate --enable-bolt-settings --skip-stage0-validation --reproducible-artifact --set --help [PATHS]... [ARGS]..."
             if [[ ${cur} == -* || ${COMP_CWORD} -eq 2 ]] ; then
                 COMPREPLY=( $(compgen -W "${opts}" -- "${cur}") )
                 return 0
@@ -1071,7 +1071,7 @@ _x.py() {
             return 0
             ;;
         x.py__fmt)
-            opts="-v -i -j -h --check --verbose --incremental --config --build-dir --build --host --target --exclude --skip --include-default-paths --rustc-error-format --on-fail --dry-run --stage --keep-stage --keep-stage-std --src --jobs --warnings --error-format --json-output --color --llvm-skip-rebuild --rust-profile-generate --rust-profile-use --llvm-profile-use --llvm-profile-generate --enable-bolt-settings --reproducible-artifact --set --help [PATHS]... [ARGS]..."
+            opts="-v -i -j -h --check --verbose --incremental --config --build-dir --build --host --target --exclude --skip --include-default-paths --rustc-error-format --on-fail --dry-run --stage --keep-stage --keep-stage-std --src --jobs --warnings --error-format --json-output --color --llvm-skip-rebuild --rust-profile-generate --rust-profile-use --llvm-profile-use --llvm-profile-generate --enable-bolt-settings --skip-stage0-validation --reproducible-artifact --set --help [PATHS]... [ARGS]..."
             if [[ ${cur} == -* || ${COMP_CWORD} -eq 2 ]] ; then
                 COMPREPLY=( $(compgen -W "${opts}" -- "${cur}") )
                 return 0
@@ -1181,7 +1181,7 @@ _x.py() {
             return 0
             ;;
         x.py__install)
-            opts="-v -i -j -h --verbose --incremental --config --build-dir --build --host --target --exclude --skip --include-default-paths --rustc-error-format --on-fail --dry-run --stage --keep-stage --keep-stage-std --src --jobs --warnings --error-format --json-output --color --llvm-skip-rebuild --rust-profile-generate --rust-profile-use --llvm-profile-use --llvm-profile-generate --enable-bolt-settings --reproducible-artifact --set --help [PATHS]... [ARGS]..."
+            opts="-v -i -j -h --verbose --incremental --config --build-dir --build --host --target --exclude --skip --include-default-paths --rustc-error-format --on-fail --dry-run --stage --keep-stage --keep-stage-std --src --jobs --warnings --error-format --json-output --color --llvm-skip-rebuild --rust-profile-generate --rust-profile-use --llvm-profile-use --llvm-profile-generate --enable-bolt-settings --skip-stage0-validation --reproducible-artifact --set --help [PATHS]... [ARGS]..."
             if [[ ${cur} == -* || ${COMP_CWORD} -eq 2 ]] ; then
                 COMPREPLY=( $(compgen -W "${opts}" -- "${cur}") )
                 return 0
@@ -1291,7 +1291,7 @@ _x.py() {
             return 0
             ;;
         x.py__run)
-            opts="-v -i -j -h --args --verbose --incremental --config --build-dir --build --host --target --exclude --skip --include-default-paths --rustc-error-format --on-fail --dry-run --stage --keep-stage --keep-stage-std --src --jobs --warnings --error-format --json-output --color --llvm-skip-rebuild --rust-profile-generate --rust-profile-use --llvm-profile-use --llvm-profile-generate --enable-bolt-settings --reproducible-artifact --set --help [PATHS]... [ARGS]..."
+            opts="-v -i -j -h --args --verbose --incremental --config --build-dir --build --host --target --exclude --skip --include-default-paths --rustc-error-format --on-fail --dry-run --stage --keep-stage --keep-stage-std --src --jobs --warnings --error-format --json-output --color --llvm-skip-rebuild --rust-profile-generate --rust-profile-use --llvm-profile-use --llvm-profile-generate --enable-bolt-settings --skip-stage0-validation --reproducible-artifact --set --help [PATHS]... [ARGS]..."
             if [[ ${cur} == -* || ${COMP_CWORD} -eq 2 ]] ; then
                 COMPREPLY=( $(compgen -W "${opts}" -- "${cur}") )
                 return 0
@@ -1405,7 +1405,7 @@ _x.py() {
             return 0
             ;;
         x.py__setup)
-            opts="-v -i -j -h --verbose --incremental --config --build-dir --build --host --target --exclude --skip --include-default-paths --rustc-error-format --on-fail --dry-run --stage --keep-stage --keep-stage-std --src --jobs --warnings --error-format --json-output --color --llvm-skip-rebuild --rust-profile-generate --rust-profile-use --llvm-profile-use --llvm-profile-generate --enable-bolt-settings --reproducible-artifact --set --help [<PROFILE>|hook|vscode|link] [PATHS]... [ARGS]..."
+            opts="-v -i -j -h --verbose --incremental --config --build-dir --build --host --target --exclude --skip --include-default-paths --rustc-error-format --on-fail --dry-run --stage --keep-stage --keep-stage-std --src --jobs --warnings --error-format --json-output --color --llvm-skip-rebuild --rust-profile-generate --rust-profile-use --llvm-profile-use --llvm-profile-generate --enable-bolt-settings --skip-stage0-validation --reproducible-artifact --set --help [<PROFILE>|hook|vscode|link] [PATHS]... [ARGS]..."
             if [[ ${cur} == -* || ${COMP_CWORD} -eq 2 ]] ; then
                 COMPREPLY=( $(compgen -W "${opts}" -- "${cur}") )
                 return 0
@@ -1515,7 +1515,7 @@ _x.py() {
             return 0
             ;;
         x.py__suggest)
-            opts="-v -i -j -h --run --verbose --incremental --config --build-dir --build --host --target --exclude --skip --include-default-paths --rustc-error-format --on-fail --dry-run --stage --keep-stage --keep-stage-std --src --jobs --warnings --error-format --json-output --color --llvm-skip-rebuild --rust-profile-generate --rust-profile-use --llvm-profile-use --llvm-profile-generate --enable-bolt-settings --reproducible-artifact --set --help [PATHS]... [ARGS]..."
+            opts="-v -i -j -h --run --verbose --incremental --config --build-dir --build --host --target --exclude --skip --include-default-paths --rustc-error-format --on-fail --dry-run --stage --keep-stage --keep-stage-std --src --jobs --warnings --error-format --json-output --color --llvm-skip-rebuild --rust-profile-generate --rust-profile-use --llvm-profile-use --llvm-profile-generate --enable-bolt-settings --skip-stage0-validation --reproducible-artifact --set --help [PATHS]... [ARGS]..."
             if [[ ${cur} == -* || ${COMP_CWORD} -eq 2 ]] ; then
                 COMPREPLY=( $(compgen -W "${opts}" -- "${cur}") )
                 return 0
@@ -1625,7 +1625,7 @@ _x.py() {
             return 0
             ;;
         x.py__test)
-            opts="-v -i -j -h --no-fail-fast --skip --test-args --rustc-args --no-doc --doc --bless --extra-checks --force-rerun --only-modified --compare-mode --pass --run --rustfix-coverage --verbose --incremental --config --build-dir --build --host --target --exclude --include-default-paths --rustc-error-format --on-fail --dry-run --stage --keep-stage --keep-stage-std --src --jobs --warnings --error-format --json-output --color --llvm-skip-rebuild --rust-profile-generate --rust-profile-use --llvm-profile-use --llvm-profile-generate --enable-bolt-settings --reproducible-artifact --set --help [PATHS]... [ARGS]..."
+            opts="-v -i -j -h --no-fail-fast --skip --test-args --rustc-args --no-doc --doc --bless --extra-checks --force-rerun --only-modified --compare-mode --pass --run --rustfix-coverage --verbose --incremental --config --build-dir --build --host --target --exclude --include-default-paths --rustc-error-format --on-fail --dry-run --stage --keep-stage --keep-stage-std --src --jobs --warnings --error-format --json-output --color --llvm-skip-rebuild --rust-profile-generate --rust-profile-use --llvm-profile-use --llvm-profile-generate --enable-bolt-settings --skip-stage0-validation --reproducible-artifact --set --help [PATHS]... [ARGS]..."
             if [[ ${cur} == -* || ${COMP_CWORD} -eq 2 ]] ; then
                 COMPREPLY=( $(compgen -W "${opts}" -- "${cur}") )
                 return 0

src/etc/completions/x.py.zsh

@@ -48,6 +48,7 @@ _x.py() {
 '--json-output[use message-format=json]' \
 '--llvm-profile-generate[generate PGO profile with llvm built for rustc]' \
 '--enable-bolt-settings[Enable BOLT link flags]' \
+'--skip-stage0-validation[Skip stage0 compiler validation]' \
 '-h[Print help]' \
 '--help[Print help]' \
 '::paths -- paths for the subcommand:_files' \
@@ -96,6 +97,7 @@ _arguments "${_arguments_options[@]}" \
 '--json-output[use message-format=json]' \
 '--llvm-profile-generate[generate PGO profile with llvm built for rustc]' \
 '--enable-bolt-settings[Enable BOLT link flags]' \
+'--skip-stage0-validation[Skip stage0 compiler validation]' \
 '-h[Print help (see more with '\''--help'\'')]' \
 '--help[Print help (see more with '\''--help'\'')]' \
 '*::paths -- paths for the subcommand:_files' \
@@ -137,6 +139,7 @@ _arguments "${_arguments_options[@]}" \
 '--json-output[use message-format=json]' \
 '--llvm-profile-generate[generate PGO profile with llvm built for rustc]' \
 '--enable-bolt-settings[Enable BOLT link flags]' \
+'--skip-stage0-validation[Skip stage0 compiler validation]' \
 '-h[Print help (see more with '\''--help'\'')]' \
 '--help[Print help (see more with '\''--help'\'')]' \
 '*::paths -- paths for the subcommand:_files' \
@@ -182,6 +185,7 @@ _arguments "${_arguments_options[@]}" \
 '--json-output[use message-format=json]' \
 '--llvm-profile-generate[generate PGO profile with llvm built for rustc]' \
 '--enable-bolt-settings[Enable BOLT link flags]' \
+'--skip-stage0-validation[Skip stage0 compiler validation]' \
 '-h[Print help (see more with '\''--help'\'')]' \
 '--help[Print help (see more with '\''--help'\'')]' \
 '*::paths -- paths for the subcommand:_files' \
@@ -222,6 +226,7 @@ _arguments "${_arguments_options[@]}" \
 '--json-output[use message-format=json]' \
 '--llvm-profile-generate[generate PGO profile with llvm built for rustc]' \
 '--enable-bolt-settings[Enable BOLT link flags]' \
+'--skip-stage0-validation[Skip stage0 compiler validation]' \
 '-h[Print help (see more with '\''--help'\'')]' \
 '--help[Print help (see more with '\''--help'\'')]' \
 '*::paths -- paths for the subcommand:_files' \
@@ -263,6 +268,7 @@ _arguments "${_arguments_options[@]}" \
 '--json-output[use message-format=json]' \
 '--llvm-profile-generate[generate PGO profile with llvm built for rustc]' \
 '--enable-bolt-settings[Enable BOLT link flags]' \
+'--skip-stage0-validation[Skip stage0 compiler validation]' \
 '-h[Print help (see more with '\''--help'\'')]' \
 '--help[Print help (see more with '\''--help'\'')]' \
 '*::paths -- paths for the subcommand:_files' \
@@ -305,6 +311,7 @@ _arguments "${_arguments_options[@]}" \
 '--json-output[use message-format=json]' \
 '--llvm-profile-generate[generate PGO profile with llvm built for rustc]' \
 '--enable-bolt-settings[Enable BOLT link flags]' \
+'--skip-stage0-validation[Skip stage0 compiler validation]' \
 '-h[Print help (see more with '\''--help'\'')]' \
 '--help[Print help (see more with '\''--help'\'')]' \
 '*::paths -- paths for the subcommand:_files' \
@@ -358,6 +365,7 @@ _arguments "${_arguments_options[@]}" \
 '--json-output[use message-format=json]' \
 '--llvm-profile-generate[generate PGO profile with llvm built for rustc]' \
 '--enable-bolt-settings[Enable BOLT link flags]' \
+'--skip-stage0-validation[Skip stage0 compiler validation]' \
 '-h[Print help (see more with '\''--help'\'')]' \
 '--help[Print help (see more with '\''--help'\'')]' \
 '*::paths -- paths for the subcommand:_files' \
@@ -399,6 +407,7 @@ _arguments "${_arguments_options[@]}" \
 '--json-output[use message-format=json]' \
 '--llvm-profile-generate[generate PGO profile with llvm built for rustc]' \
 '--enable-bolt-settings[Enable BOLT link flags]' \
+'--skip-stage0-validation[Skip stage0 compiler validation]' \
 '-h[Print help]' \
 '--help[Print help]' \
 '*::paths -- paths for the subcommand:_files' \
@@ -440,6 +449,7 @@ _arguments "${_arguments_options[@]}" \
 '--json-output[use message-format=json]' \
 '--llvm-profile-generate[generate PGO profile with llvm built for rustc]' \
 '--enable-bolt-settings[Enable BOLT link flags]' \
+'--skip-stage0-validation[Skip stage0 compiler validation]' \
 '-h[Print help]' \
 '--help[Print help]' \
 '*::paths -- paths for the subcommand:_files' \
@@ -480,6 +490,7 @@ _arguments "${_arguments_options[@]}" \
 '--json-output[use message-format=json]' \
 '--llvm-profile-generate[generate PGO profile with llvm built for rustc]' \
 '--enable-bolt-settings[Enable BOLT link flags]' \
+'--skip-stage0-validation[Skip stage0 compiler validation]' \
 '-h[Print help]' \
 '--help[Print help]' \
 '*::paths -- paths for the subcommand:_files' \
@@ -520,6 +531,7 @@ _arguments "${_arguments_options[@]}" \
 '--json-output[use message-format=json]' \
 '--llvm-profile-generate[generate PGO profile with llvm built for rustc]' \
 '--enable-bolt-settings[Enable BOLT link flags]' \
+'--skip-stage0-validation[Skip stage0 compiler validation]' \
 '-h[Print help]' \
 '--help[Print help]' \
 '*::paths -- paths for the subcommand:_files' \
@@ -561,6 +573,7 @@ _arguments "${_arguments_options[@]}" \
 '--json-output[use message-format=json]' \
 '--llvm-profile-generate[generate PGO profile with llvm built for rustc]' \
 '--enable-bolt-settings[Enable BOLT link flags]' \
+'--skip-stage0-validation[Skip stage0 compiler validation]' \
 '-h[Print help (see more with '\''--help'\'')]' \
 '--help[Print help (see more with '\''--help'\'')]' \
 '*::paths -- paths for the subcommand:_files' \
@@ -601,6 +614,7 @@ _arguments "${_arguments_options[@]}" \
 '--json-output[use message-format=json]' \
 '--llvm-profile-generate[generate PGO profile with llvm built for rustc]' \
 '--enable-bolt-settings[Enable BOLT link flags]' \
+'--skip-stage0-validation[Skip stage0 compiler validation]' \
 '-h[Print help (see more with '\''--help'\'')]' \
 '--help[Print help (see more with '\''--help'\'')]' \
 '::profile -- Either the profile for `config.toml` or another setup action. May be omitted to set up interactively:_files' \
@@ -643,6 +657,7 @@ _arguments "${_arguments_options[@]}" \
 '--json-output[use message-format=json]' \
 '--llvm-profile-generate[generate PGO profile with llvm built for rustc]' \
 '--enable-bolt-settings[Enable BOLT link flags]' \
+'--skip-stage0-validation[Skip stage0 compiler validation]' \
 '-h[Print help (see more with '\''--help'\'')]' \
 '--help[Print help (see more with '\''--help'\'')]' \
 '*::paths -- paths for the subcommand:_files' \