rust/tests/ui/indexing_slicing_slice.stderr

128 lines
3.1 KiB
Plaintext
Raw Normal View History

error: slicing may panic
2024-02-17 06:16:29 -06:00
--> tests/ui/indexing_slicing_slice.rs:12:6
Extend `indexing_slicing` lint Hey there clippy team! I've made some assumptions in this PR and I'm not at all certain they'll look like the right approach to you. I'm looking forward to any feedback or revision requests you have, thanks! Prior to this commit the `indexing_slicing` lint was limited to indexing/slicing operations on arrays. This meant that the scope of a really useful lint didn't include vectors. In order to include vectors in the `indexing_slicing` lint a few steps were taken. The `array_indexing.rs` source file in `clippy_lints` was renamed to `indexing_slicing.rs` to more accurately reflect the lint's new scope. The `OUT_OF_BOUNDS_INDEXING` lint persists through these changes so if we can know that a constant index or slice on an array is in bounds no lint is triggered. The `array_indexing` tests in the `tests/ui` directory were also extended and moved to `indexing_slicing.rs` and `indexing_slicing.stderr`. The `indexing_slicing` lint was moved to the `clippy_pedantic` lint group. A specific "Consider using" string was added to each of the `indexing_slicing` lint reports. At least one of the test scenarios might look peculiar and I'll leave it up to y'all to decide if it's palatable. It's the result of indexing the array `x` after `let x = [1, 2, 3, 4];` ``` error: slicing may panic. Consider using `.get(..n)`or `.get_mut(..n)`instead --> $DIR/indexing_slicing.rs:23:6 | 23 | &x[0..][..3]; | ^^^^^^^^^^^ ``` The error string reports only on the second half's range-to, because the range-from is in bounds! Again, thanks for taking a look. Closes #2536
2018-05-22 23:56:02 -05:00
|
2018-12-27 09:57:55 -06:00
LL | &x[index..];
| ^^^^^^^^^^
|
= help: consider using `.get(n..)` or .get_mut(n..)` instead
2022-09-22 11:04:22 -05:00
= note: `-D clippy::indexing-slicing` implied by `-D warnings`
= help: to override `-D warnings` add `#[allow(clippy::indexing_slicing)]`
Extend `indexing_slicing` lint Hey there clippy team! I've made some assumptions in this PR and I'm not at all certain they'll look like the right approach to you. I'm looking forward to any feedback or revision requests you have, thanks! Prior to this commit the `indexing_slicing` lint was limited to indexing/slicing operations on arrays. This meant that the scope of a really useful lint didn't include vectors. In order to include vectors in the `indexing_slicing` lint a few steps were taken. The `array_indexing.rs` source file in `clippy_lints` was renamed to `indexing_slicing.rs` to more accurately reflect the lint's new scope. The `OUT_OF_BOUNDS_INDEXING` lint persists through these changes so if we can know that a constant index or slice on an array is in bounds no lint is triggered. The `array_indexing` tests in the `tests/ui` directory were also extended and moved to `indexing_slicing.rs` and `indexing_slicing.stderr`. The `indexing_slicing` lint was moved to the `clippy_pedantic` lint group. A specific "Consider using" string was added to each of the `indexing_slicing` lint reports. At least one of the test scenarios might look peculiar and I'll leave it up to y'all to decide if it's palatable. It's the result of indexing the array `x` after `let x = [1, 2, 3, 4];` ``` error: slicing may panic. Consider using `.get(..n)`or `.get_mut(..n)`instead --> $DIR/indexing_slicing.rs:23:6 | 23 | &x[0..][..3]; | ^^^^^^^^^^^ ``` The error string reports only on the second half's range-to, because the range-from is in bounds! Again, thanks for taking a look. Closes #2536
2018-05-22 23:56:02 -05:00
error: slicing may panic
2024-02-17 06:16:29 -06:00
--> tests/ui/indexing_slicing_slice.rs:14:6
Extend `indexing_slicing` lint Hey there clippy team! I've made some assumptions in this PR and I'm not at all certain they'll look like the right approach to you. I'm looking forward to any feedback or revision requests you have, thanks! Prior to this commit the `indexing_slicing` lint was limited to indexing/slicing operations on arrays. This meant that the scope of a really useful lint didn't include vectors. In order to include vectors in the `indexing_slicing` lint a few steps were taken. The `array_indexing.rs` source file in `clippy_lints` was renamed to `indexing_slicing.rs` to more accurately reflect the lint's new scope. The `OUT_OF_BOUNDS_INDEXING` lint persists through these changes so if we can know that a constant index or slice on an array is in bounds no lint is triggered. The `array_indexing` tests in the `tests/ui` directory were also extended and moved to `indexing_slicing.rs` and `indexing_slicing.stderr`. The `indexing_slicing` lint was moved to the `clippy_pedantic` lint group. A specific "Consider using" string was added to each of the `indexing_slicing` lint reports. At least one of the test scenarios might look peculiar and I'll leave it up to y'all to decide if it's palatable. It's the result of indexing the array `x` after `let x = [1, 2, 3, 4];` ``` error: slicing may panic. Consider using `.get(..n)`or `.get_mut(..n)`instead --> $DIR/indexing_slicing.rs:23:6 | 23 | &x[0..][..3]; | ^^^^^^^^^^^ ``` The error string reports only on the second half's range-to, because the range-from is in bounds! Again, thanks for taking a look. Closes #2536
2018-05-22 23:56:02 -05:00
|
2018-12-27 09:57:55 -06:00
LL | &x[..index];
| ^^^^^^^^^^
|
= help: consider using `.get(..n)`or `.get_mut(..n)` instead
Extend `indexing_slicing` lint Hey there clippy team! I've made some assumptions in this PR and I'm not at all certain they'll look like the right approach to you. I'm looking forward to any feedback or revision requests you have, thanks! Prior to this commit the `indexing_slicing` lint was limited to indexing/slicing operations on arrays. This meant that the scope of a really useful lint didn't include vectors. In order to include vectors in the `indexing_slicing` lint a few steps were taken. The `array_indexing.rs` source file in `clippy_lints` was renamed to `indexing_slicing.rs` to more accurately reflect the lint's new scope. The `OUT_OF_BOUNDS_INDEXING` lint persists through these changes so if we can know that a constant index or slice on an array is in bounds no lint is triggered. The `array_indexing` tests in the `tests/ui` directory were also extended and moved to `indexing_slicing.rs` and `indexing_slicing.stderr`. The `indexing_slicing` lint was moved to the `clippy_pedantic` lint group. A specific "Consider using" string was added to each of the `indexing_slicing` lint reports. At least one of the test scenarios might look peculiar and I'll leave it up to y'all to decide if it's palatable. It's the result of indexing the array `x` after `let x = [1, 2, 3, 4];` ``` error: slicing may panic. Consider using `.get(..n)`or `.get_mut(..n)`instead --> $DIR/indexing_slicing.rs:23:6 | 23 | &x[0..][..3]; | ^^^^^^^^^^^ ``` The error string reports only on the second half's range-to, because the range-from is in bounds! Again, thanks for taking a look. Closes #2536
2018-05-22 23:56:02 -05:00
error: slicing may panic
2024-02-17 06:16:29 -06:00
--> tests/ui/indexing_slicing_slice.rs:16:6
Extend `indexing_slicing` lint Hey there clippy team! I've made some assumptions in this PR and I'm not at all certain they'll look like the right approach to you. I'm looking forward to any feedback or revision requests you have, thanks! Prior to this commit the `indexing_slicing` lint was limited to indexing/slicing operations on arrays. This meant that the scope of a really useful lint didn't include vectors. In order to include vectors in the `indexing_slicing` lint a few steps were taken. The `array_indexing.rs` source file in `clippy_lints` was renamed to `indexing_slicing.rs` to more accurately reflect the lint's new scope. The `OUT_OF_BOUNDS_INDEXING` lint persists through these changes so if we can know that a constant index or slice on an array is in bounds no lint is triggered. The `array_indexing` tests in the `tests/ui` directory were also extended and moved to `indexing_slicing.rs` and `indexing_slicing.stderr`. The `indexing_slicing` lint was moved to the `clippy_pedantic` lint group. A specific "Consider using" string was added to each of the `indexing_slicing` lint reports. At least one of the test scenarios might look peculiar and I'll leave it up to y'all to decide if it's palatable. It's the result of indexing the array `x` after `let x = [1, 2, 3, 4];` ``` error: slicing may panic. Consider using `.get(..n)`or `.get_mut(..n)`instead --> $DIR/indexing_slicing.rs:23:6 | 23 | &x[0..][..3]; | ^^^^^^^^^^^ ``` The error string reports only on the second half's range-to, because the range-from is in bounds! Again, thanks for taking a look. Closes #2536
2018-05-22 23:56:02 -05:00
|
2018-12-27 09:57:55 -06:00
LL | &x[index_from..index_to];
| ^^^^^^^^^^^^^^^^^^^^^^^
|
= help: consider using `.get(n..m)` or `.get_mut(n..m)` instead
Extend `indexing_slicing` lint Hey there clippy team! I've made some assumptions in this PR and I'm not at all certain they'll look like the right approach to you. I'm looking forward to any feedback or revision requests you have, thanks! Prior to this commit the `indexing_slicing` lint was limited to indexing/slicing operations on arrays. This meant that the scope of a really useful lint didn't include vectors. In order to include vectors in the `indexing_slicing` lint a few steps were taken. The `array_indexing.rs` source file in `clippy_lints` was renamed to `indexing_slicing.rs` to more accurately reflect the lint's new scope. The `OUT_OF_BOUNDS_INDEXING` lint persists through these changes so if we can know that a constant index or slice on an array is in bounds no lint is triggered. The `array_indexing` tests in the `tests/ui` directory were also extended and moved to `indexing_slicing.rs` and `indexing_slicing.stderr`. The `indexing_slicing` lint was moved to the `clippy_pedantic` lint group. A specific "Consider using" string was added to each of the `indexing_slicing` lint reports. At least one of the test scenarios might look peculiar and I'll leave it up to y'all to decide if it's palatable. It's the result of indexing the array `x` after `let x = [1, 2, 3, 4];` ``` error: slicing may panic. Consider using `.get(..n)`or `.get_mut(..n)`instead --> $DIR/indexing_slicing.rs:23:6 | 23 | &x[0..][..3]; | ^^^^^^^^^^^ ``` The error string reports only on the second half's range-to, because the range-from is in bounds! Again, thanks for taking a look. Closes #2536
2018-05-22 23:56:02 -05:00
error: slicing may panic
2024-02-17 06:16:29 -06:00
--> tests/ui/indexing_slicing_slice.rs:18:6
Extend `indexing_slicing` lint Hey there clippy team! I've made some assumptions in this PR and I'm not at all certain they'll look like the right approach to you. I'm looking forward to any feedback or revision requests you have, thanks! Prior to this commit the `indexing_slicing` lint was limited to indexing/slicing operations on arrays. This meant that the scope of a really useful lint didn't include vectors. In order to include vectors in the `indexing_slicing` lint a few steps were taken. The `array_indexing.rs` source file in `clippy_lints` was renamed to `indexing_slicing.rs` to more accurately reflect the lint's new scope. The `OUT_OF_BOUNDS_INDEXING` lint persists through these changes so if we can know that a constant index or slice on an array is in bounds no lint is triggered. The `array_indexing` tests in the `tests/ui` directory were also extended and moved to `indexing_slicing.rs` and `indexing_slicing.stderr`. The `indexing_slicing` lint was moved to the `clippy_pedantic` lint group. A specific "Consider using" string was added to each of the `indexing_slicing` lint reports. At least one of the test scenarios might look peculiar and I'll leave it up to y'all to decide if it's palatable. It's the result of indexing the array `x` after `let x = [1, 2, 3, 4];` ``` error: slicing may panic. Consider using `.get(..n)`or `.get_mut(..n)`instead --> $DIR/indexing_slicing.rs:23:6 | 23 | &x[0..][..3]; | ^^^^^^^^^^^ ``` The error string reports only on the second half's range-to, because the range-from is in bounds! Again, thanks for taking a look. Closes #2536
2018-05-22 23:56:02 -05:00
|
LL | &x[index_from..][..index_to];
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
= help: consider using `.get(..n)`or `.get_mut(..n)` instead
Extend `indexing_slicing` lint Hey there clippy team! I've made some assumptions in this PR and I'm not at all certain they'll look like the right approach to you. I'm looking forward to any feedback or revision requests you have, thanks! Prior to this commit the `indexing_slicing` lint was limited to indexing/slicing operations on arrays. This meant that the scope of a really useful lint didn't include vectors. In order to include vectors in the `indexing_slicing` lint a few steps were taken. The `array_indexing.rs` source file in `clippy_lints` was renamed to `indexing_slicing.rs` to more accurately reflect the lint's new scope. The `OUT_OF_BOUNDS_INDEXING` lint persists through these changes so if we can know that a constant index or slice on an array is in bounds no lint is triggered. The `array_indexing` tests in the `tests/ui` directory were also extended and moved to `indexing_slicing.rs` and `indexing_slicing.stderr`. The `indexing_slicing` lint was moved to the `clippy_pedantic` lint group. A specific "Consider using" string was added to each of the `indexing_slicing` lint reports. At least one of the test scenarios might look peculiar and I'll leave it up to y'all to decide if it's palatable. It's the result of indexing the array `x` after `let x = [1, 2, 3, 4];` ``` error: slicing may panic. Consider using `.get(..n)`or `.get_mut(..n)`instead --> $DIR/indexing_slicing.rs:23:6 | 23 | &x[0..][..3]; | ^^^^^^^^^^^ ``` The error string reports only on the second half's range-to, because the range-from is in bounds! Again, thanks for taking a look. Closes #2536
2018-05-22 23:56:02 -05:00
error: slicing may panic
2024-02-17 06:16:29 -06:00
--> tests/ui/indexing_slicing_slice.rs:18:6
Extend `indexing_slicing` lint Hey there clippy team! I've made some assumptions in this PR and I'm not at all certain they'll look like the right approach to you. I'm looking forward to any feedback or revision requests you have, thanks! Prior to this commit the `indexing_slicing` lint was limited to indexing/slicing operations on arrays. This meant that the scope of a really useful lint didn't include vectors. In order to include vectors in the `indexing_slicing` lint a few steps were taken. The `array_indexing.rs` source file in `clippy_lints` was renamed to `indexing_slicing.rs` to more accurately reflect the lint's new scope. The `OUT_OF_BOUNDS_INDEXING` lint persists through these changes so if we can know that a constant index or slice on an array is in bounds no lint is triggered. The `array_indexing` tests in the `tests/ui` directory were also extended and moved to `indexing_slicing.rs` and `indexing_slicing.stderr`. The `indexing_slicing` lint was moved to the `clippy_pedantic` lint group. A specific "Consider using" string was added to each of the `indexing_slicing` lint reports. At least one of the test scenarios might look peculiar and I'll leave it up to y'all to decide if it's palatable. It's the result of indexing the array `x` after `let x = [1, 2, 3, 4];` ``` error: slicing may panic. Consider using `.get(..n)`or `.get_mut(..n)`instead --> $DIR/indexing_slicing.rs:23:6 | 23 | &x[0..][..3]; | ^^^^^^^^^^^ ``` The error string reports only on the second half's range-to, because the range-from is in bounds! Again, thanks for taking a look. Closes #2536
2018-05-22 23:56:02 -05:00
|
LL | &x[index_from..][..index_to];
| ^^^^^^^^^^^^^^^
|
= help: consider using `.get(n..)` or .get_mut(n..)` instead
Extend `indexing_slicing` lint Hey there clippy team! I've made some assumptions in this PR and I'm not at all certain they'll look like the right approach to you. I'm looking forward to any feedback or revision requests you have, thanks! Prior to this commit the `indexing_slicing` lint was limited to indexing/slicing operations on arrays. This meant that the scope of a really useful lint didn't include vectors. In order to include vectors in the `indexing_slicing` lint a few steps were taken. The `array_indexing.rs` source file in `clippy_lints` was renamed to `indexing_slicing.rs` to more accurately reflect the lint's new scope. The `OUT_OF_BOUNDS_INDEXING` lint persists through these changes so if we can know that a constant index or slice on an array is in bounds no lint is triggered. The `array_indexing` tests in the `tests/ui` directory were also extended and moved to `indexing_slicing.rs` and `indexing_slicing.stderr`. The `indexing_slicing` lint was moved to the `clippy_pedantic` lint group. A specific "Consider using" string was added to each of the `indexing_slicing` lint reports. At least one of the test scenarios might look peculiar and I'll leave it up to y'all to decide if it's palatable. It's the result of indexing the array `x` after `let x = [1, 2, 3, 4];` ``` error: slicing may panic. Consider using `.get(..n)`or `.get_mut(..n)`instead --> $DIR/indexing_slicing.rs:23:6 | 23 | &x[0..][..3]; | ^^^^^^^^^^^ ``` The error string reports only on the second half's range-to, because the range-from is in bounds! Again, thanks for taking a look. Closes #2536
2018-05-22 23:56:02 -05:00
error: slicing may panic
2024-02-17 06:16:29 -06:00
--> tests/ui/indexing_slicing_slice.rs:21:6
Extend `indexing_slicing` lint Hey there clippy team! I've made some assumptions in this PR and I'm not at all certain they'll look like the right approach to you. I'm looking forward to any feedback or revision requests you have, thanks! Prior to this commit the `indexing_slicing` lint was limited to indexing/slicing operations on arrays. This meant that the scope of a really useful lint didn't include vectors. In order to include vectors in the `indexing_slicing` lint a few steps were taken. The `array_indexing.rs` source file in `clippy_lints` was renamed to `indexing_slicing.rs` to more accurately reflect the lint's new scope. The `OUT_OF_BOUNDS_INDEXING` lint persists through these changes so if we can know that a constant index or slice on an array is in bounds no lint is triggered. The `array_indexing` tests in the `tests/ui` directory were also extended and moved to `indexing_slicing.rs` and `indexing_slicing.stderr`. The `indexing_slicing` lint was moved to the `clippy_pedantic` lint group. A specific "Consider using" string was added to each of the `indexing_slicing` lint reports. At least one of the test scenarios might look peculiar and I'll leave it up to y'all to decide if it's palatable. It's the result of indexing the array `x` after `let x = [1, 2, 3, 4];` ``` error: slicing may panic. Consider using `.get(..n)`or `.get_mut(..n)`instead --> $DIR/indexing_slicing.rs:23:6 | 23 | &x[0..][..3]; | ^^^^^^^^^^^ ``` The error string reports only on the second half's range-to, because the range-from is in bounds! Again, thanks for taking a look. Closes #2536
2018-05-22 23:56:02 -05:00
|
LL | &x[5..][..10];
| ^^^^^^^^^^^^
|
= help: consider using `.get(..n)`or `.get_mut(..n)` instead
error: range is out of bounds
2024-02-17 06:16:29 -06:00
--> tests/ui/indexing_slicing_slice.rs:21:8
|
LL | &x[5..][..10];
| ^
|
= note: `-D clippy::out-of-bounds-indexing` implied by `-D warnings`
= help: to override `-D warnings` add `#[allow(clippy::out_of_bounds_indexing)]`
error: slicing may panic
2024-02-17 06:16:29 -06:00
--> tests/ui/indexing_slicing_slice.rs:25:6
|
2018-12-27 09:57:55 -06:00
LL | &x[0..][..3];
| ^^^^^^^^^^^
|
= help: consider using `.get(..n)`or `.get_mut(..n)` instead
error: slicing may panic
2024-02-17 06:16:29 -06:00
--> tests/ui/indexing_slicing_slice.rs:27:6
|
2018-12-27 09:57:55 -06:00
LL | &x[1..][..5];
| ^^^^^^^^^^^
|
= help: consider using `.get(..n)`or `.get_mut(..n)` instead
error: range is out of bounds
2024-02-17 06:16:29 -06:00
--> tests/ui/indexing_slicing_slice.rs:35:12
|
2018-12-27 09:57:55 -06:00
LL | &y[0..=4];
| ^
error: range is out of bounds
2024-02-17 06:16:29 -06:00
--> tests/ui/indexing_slicing_slice.rs:37:11
|
2018-12-27 09:57:55 -06:00
LL | &y[..=4];
| ^
error: slicing may panic
2024-02-17 06:16:29 -06:00
--> tests/ui/indexing_slicing_slice.rs:43:6
Extend `indexing_slicing` lint Hey there clippy team! I've made some assumptions in this PR and I'm not at all certain they'll look like the right approach to you. I'm looking forward to any feedback or revision requests you have, thanks! Prior to this commit the `indexing_slicing` lint was limited to indexing/slicing operations on arrays. This meant that the scope of a really useful lint didn't include vectors. In order to include vectors in the `indexing_slicing` lint a few steps were taken. The `array_indexing.rs` source file in `clippy_lints` was renamed to `indexing_slicing.rs` to more accurately reflect the lint's new scope. The `OUT_OF_BOUNDS_INDEXING` lint persists through these changes so if we can know that a constant index or slice on an array is in bounds no lint is triggered. The `array_indexing` tests in the `tests/ui` directory were also extended and moved to `indexing_slicing.rs` and `indexing_slicing.stderr`. The `indexing_slicing` lint was moved to the `clippy_pedantic` lint group. A specific "Consider using" string was added to each of the `indexing_slicing` lint reports. At least one of the test scenarios might look peculiar and I'll leave it up to y'all to decide if it's palatable. It's the result of indexing the array `x` after `let x = [1, 2, 3, 4];` ``` error: slicing may panic. Consider using `.get(..n)`or `.get_mut(..n)`instead --> $DIR/indexing_slicing.rs:23:6 | 23 | &x[0..][..3]; | ^^^^^^^^^^^ ``` The error string reports only on the second half's range-to, because the range-from is in bounds! Again, thanks for taking a look. Closes #2536
2018-05-22 23:56:02 -05:00
|
2018-12-27 09:57:55 -06:00
LL | &v[10..100];
| ^^^^^^^^^^
|
= help: consider using `.get(n..m)` or `.get_mut(n..m)` instead
error: slicing may panic
2024-02-17 06:16:29 -06:00
--> tests/ui/indexing_slicing_slice.rs:45:6
|
LL | &x[10..][..100];
| ^^^^^^^^^^^^^^
|
= help: consider using `.get(..n)`or `.get_mut(..n)` instead
error: range is out of bounds
2024-02-17 06:16:29 -06:00
--> tests/ui/indexing_slicing_slice.rs:45:8
|
LL | &x[10..][..100];
| ^^
error: slicing may panic
2024-02-17 06:16:29 -06:00
--> tests/ui/indexing_slicing_slice.rs:48:6
Extend `indexing_slicing` lint Hey there clippy team! I've made some assumptions in this PR and I'm not at all certain they'll look like the right approach to you. I'm looking forward to any feedback or revision requests you have, thanks! Prior to this commit the `indexing_slicing` lint was limited to indexing/slicing operations on arrays. This meant that the scope of a really useful lint didn't include vectors. In order to include vectors in the `indexing_slicing` lint a few steps were taken. The `array_indexing.rs` source file in `clippy_lints` was renamed to `indexing_slicing.rs` to more accurately reflect the lint's new scope. The `OUT_OF_BOUNDS_INDEXING` lint persists through these changes so if we can know that a constant index or slice on an array is in bounds no lint is triggered. The `array_indexing` tests in the `tests/ui` directory were also extended and moved to `indexing_slicing.rs` and `indexing_slicing.stderr`. The `indexing_slicing` lint was moved to the `clippy_pedantic` lint group. A specific "Consider using" string was added to each of the `indexing_slicing` lint reports. At least one of the test scenarios might look peculiar and I'll leave it up to y'all to decide if it's palatable. It's the result of indexing the array `x` after `let x = [1, 2, 3, 4];` ``` error: slicing may panic. Consider using `.get(..n)`or `.get_mut(..n)`instead --> $DIR/indexing_slicing.rs:23:6 | 23 | &x[0..][..3]; | ^^^^^^^^^^^ ``` The error string reports only on the second half's range-to, because the range-from is in bounds! Again, thanks for taking a look. Closes #2536
2018-05-22 23:56:02 -05:00
|
2018-12-27 09:57:55 -06:00
LL | &v[10..];
Extend `indexing_slicing` lint Hey there clippy team! I've made some assumptions in this PR and I'm not at all certain they'll look like the right approach to you. I'm looking forward to any feedback or revision requests you have, thanks! Prior to this commit the `indexing_slicing` lint was limited to indexing/slicing operations on arrays. This meant that the scope of a really useful lint didn't include vectors. In order to include vectors in the `indexing_slicing` lint a few steps were taken. The `array_indexing.rs` source file in `clippy_lints` was renamed to `indexing_slicing.rs` to more accurately reflect the lint's new scope. The `OUT_OF_BOUNDS_INDEXING` lint persists through these changes so if we can know that a constant index or slice on an array is in bounds no lint is triggered. The `array_indexing` tests in the `tests/ui` directory were also extended and moved to `indexing_slicing.rs` and `indexing_slicing.stderr`. The `indexing_slicing` lint was moved to the `clippy_pedantic` lint group. A specific "Consider using" string was added to each of the `indexing_slicing` lint reports. At least one of the test scenarios might look peculiar and I'll leave it up to y'all to decide if it's palatable. It's the result of indexing the array `x` after `let x = [1, 2, 3, 4];` ``` error: slicing may panic. Consider using `.get(..n)`or `.get_mut(..n)`instead --> $DIR/indexing_slicing.rs:23:6 | 23 | &x[0..][..3]; | ^^^^^^^^^^^ ``` The error string reports only on the second half's range-to, because the range-from is in bounds! Again, thanks for taking a look. Closes #2536
2018-05-22 23:56:02 -05:00
| ^^^^^^^
|
= help: consider using `.get(n..)` or .get_mut(n..)` instead
Extend `indexing_slicing` lint Hey there clippy team! I've made some assumptions in this PR and I'm not at all certain they'll look like the right approach to you. I'm looking forward to any feedback or revision requests you have, thanks! Prior to this commit the `indexing_slicing` lint was limited to indexing/slicing operations on arrays. This meant that the scope of a really useful lint didn't include vectors. In order to include vectors in the `indexing_slicing` lint a few steps were taken. The `array_indexing.rs` source file in `clippy_lints` was renamed to `indexing_slicing.rs` to more accurately reflect the lint's new scope. The `OUT_OF_BOUNDS_INDEXING` lint persists through these changes so if we can know that a constant index or slice on an array is in bounds no lint is triggered. The `array_indexing` tests in the `tests/ui` directory were also extended and moved to `indexing_slicing.rs` and `indexing_slicing.stderr`. The `indexing_slicing` lint was moved to the `clippy_pedantic` lint group. A specific "Consider using" string was added to each of the `indexing_slicing` lint reports. At least one of the test scenarios might look peculiar and I'll leave it up to y'all to decide if it's palatable. It's the result of indexing the array `x` after `let x = [1, 2, 3, 4];` ``` error: slicing may panic. Consider using `.get(..n)`or `.get_mut(..n)`instead --> $DIR/indexing_slicing.rs:23:6 | 23 | &x[0..][..3]; | ^^^^^^^^^^^ ``` The error string reports only on the second half's range-to, because the range-from is in bounds! Again, thanks for taking a look. Closes #2536
2018-05-22 23:56:02 -05:00
error: slicing may panic
2024-02-17 06:16:29 -06:00
--> tests/ui/indexing_slicing_slice.rs:50:6
Extend `indexing_slicing` lint Hey there clippy team! I've made some assumptions in this PR and I'm not at all certain they'll look like the right approach to you. I'm looking forward to any feedback or revision requests you have, thanks! Prior to this commit the `indexing_slicing` lint was limited to indexing/slicing operations on arrays. This meant that the scope of a really useful lint didn't include vectors. In order to include vectors in the `indexing_slicing` lint a few steps were taken. The `array_indexing.rs` source file in `clippy_lints` was renamed to `indexing_slicing.rs` to more accurately reflect the lint's new scope. The `OUT_OF_BOUNDS_INDEXING` lint persists through these changes so if we can know that a constant index or slice on an array is in bounds no lint is triggered. The `array_indexing` tests in the `tests/ui` directory were also extended and moved to `indexing_slicing.rs` and `indexing_slicing.stderr`. The `indexing_slicing` lint was moved to the `clippy_pedantic` lint group. A specific "Consider using" string was added to each of the `indexing_slicing` lint reports. At least one of the test scenarios might look peculiar and I'll leave it up to y'all to decide if it's palatable. It's the result of indexing the array `x` after `let x = [1, 2, 3, 4];` ``` error: slicing may panic. Consider using `.get(..n)`or `.get_mut(..n)`instead --> $DIR/indexing_slicing.rs:23:6 | 23 | &x[0..][..3]; | ^^^^^^^^^^^ ``` The error string reports only on the second half's range-to, because the range-from is in bounds! Again, thanks for taking a look. Closes #2536
2018-05-22 23:56:02 -05:00
|
2018-12-27 09:57:55 -06:00
LL | &v[..100];
Extend `indexing_slicing` lint Hey there clippy team! I've made some assumptions in this PR and I'm not at all certain they'll look like the right approach to you. I'm looking forward to any feedback or revision requests you have, thanks! Prior to this commit the `indexing_slicing` lint was limited to indexing/slicing operations on arrays. This meant that the scope of a really useful lint didn't include vectors. In order to include vectors in the `indexing_slicing` lint a few steps were taken. The `array_indexing.rs` source file in `clippy_lints` was renamed to `indexing_slicing.rs` to more accurately reflect the lint's new scope. The `OUT_OF_BOUNDS_INDEXING` lint persists through these changes so if we can know that a constant index or slice on an array is in bounds no lint is triggered. The `array_indexing` tests in the `tests/ui` directory were also extended and moved to `indexing_slicing.rs` and `indexing_slicing.stderr`. The `indexing_slicing` lint was moved to the `clippy_pedantic` lint group. A specific "Consider using" string was added to each of the `indexing_slicing` lint reports. At least one of the test scenarios might look peculiar and I'll leave it up to y'all to decide if it's palatable. It's the result of indexing the array `x` after `let x = [1, 2, 3, 4];` ``` error: slicing may panic. Consider using `.get(..n)`or `.get_mut(..n)`instead --> $DIR/indexing_slicing.rs:23:6 | 23 | &x[0..][..3]; | ^^^^^^^^^^^ ``` The error string reports only on the second half's range-to, because the range-from is in bounds! Again, thanks for taking a look. Closes #2536
2018-05-22 23:56:02 -05:00
| ^^^^^^^^
|
= help: consider using `.get(..n)`or `.get_mut(..n)` instead
Extend `indexing_slicing` lint Hey there clippy team! I've made some assumptions in this PR and I'm not at all certain they'll look like the right approach to you. I'm looking forward to any feedback or revision requests you have, thanks! Prior to this commit the `indexing_slicing` lint was limited to indexing/slicing operations on arrays. This meant that the scope of a really useful lint didn't include vectors. In order to include vectors in the `indexing_slicing` lint a few steps were taken. The `array_indexing.rs` source file in `clippy_lints` was renamed to `indexing_slicing.rs` to more accurately reflect the lint's new scope. The `OUT_OF_BOUNDS_INDEXING` lint persists through these changes so if we can know that a constant index or slice on an array is in bounds no lint is triggered. The `array_indexing` tests in the `tests/ui` directory were also extended and moved to `indexing_slicing.rs` and `indexing_slicing.stderr`. The `indexing_slicing` lint was moved to the `clippy_pedantic` lint group. A specific "Consider using" string was added to each of the `indexing_slicing` lint reports. At least one of the test scenarios might look peculiar and I'll leave it up to y'all to decide if it's palatable. It's the result of indexing the array `x` after `let x = [1, 2, 3, 4];` ``` error: slicing may panic. Consider using `.get(..n)`or `.get_mut(..n)`instead --> $DIR/indexing_slicing.rs:23:6 | 23 | &x[0..][..3]; | ^^^^^^^^^^^ ``` The error string reports only on the second half's range-to, because the range-from is in bounds! Again, thanks for taking a look. Closes #2536
2018-05-22 23:56:02 -05:00
error: aborting due to 16 previous errors
2018-01-16 10:06:27 -06:00