rust/tests/run-coverage/uses_inline_crate.coverage

165 lines
7.9 KiB
Plaintext
Raw Normal View History

2023-06-12 03:07:04 -05:00
$DIR/auxiliary/used_inline_crate.rs:
coverage bug fixes and optimization support Adjusted LLVM codegen for code compiled with `-Zinstrument-coverage` to address multiple, somewhat related issues. Fixed a significant flaw in prior coverage solution: Every counter generated a new counter variable, but there should have only been one counter variable per function. This appears to have bloated .profraw files significantly. (For a small program, it increased the size by about 40%. I have not tested large programs, but there is anecdotal evidence that profraw files were way too large. This is a good fix, regardless, but hopefully it also addresses related issues. Fixes: #82144 Invalid LLVM coverage data produced when compiled with -C opt-level=1 Existing tests now work up to at least `opt-level=3`. This required a detailed analysis of the LLVM IR, comparisons with Clang C++ LLVM IR when compiled with coverage, and a lot of trial and error with codegen adjustments. The biggest hurdle was figuring out how to continue to support coverage results for unused functions and generics. Rust's coverage results have three advantages over Clang's coverage results: 1. Rust's coverage map does not include any overlapping code regions, making coverage counting unambiguous. 2. Rust generates coverage results (showing zero counts) for all unused functions, including generics. (Clang does not generate coverage for uninstantiated template functions.) 3. Rust's unused functions produce minimal stubbed functions in LLVM IR, sufficient for including in the coverage results; while Clang must generate the complete LLVM IR for each unused function, even though it will never be called. This PR removes the previous hack of attempting to inject coverage into some other existing function instance, and generates dedicated instances for each unused function. This change, and a few other adjustments (similar to what is required for `-C link-dead-code`, but with lower impact), makes it possible to support LLVM optimizations. Fixes: #79651 Coverage report: "Unexecuted instantiation:..." for a generic function from multiple crates Fixed by removing the aforementioned hack. Some "Unexecuted instantiation" notices are unavoidable, as explained in the `used_crate.rs` test, but `-Zinstrument-coverage` has new options to back off support for either unused generics, or all unused functions, which avoids the notice, at the cost of less coverage of unused functions. Fixes: #82875 Invalid LLVM coverage data produced with crate brotli_decompressor Fixed by disabling the LLVM function attribute that forces inlining, if `-Z instrument-coverage` is enabled. This attribute is applied to Rust functions with `#[inline(always)], and in some cases, the forced inlining breaks coverage instrumentation and reports.
2021-03-15 18:32:45 -05:00
1| |#![allow(unused_assignments, unused_variables)]
2| |
3| |// compile-flags: -C opt-level=3
4| |// ^^ validates coverage now works with optimizations
coverage bug fixes and optimization support Adjusted LLVM codegen for code compiled with `-Zinstrument-coverage` to address multiple, somewhat related issues. Fixed a significant flaw in prior coverage solution: Every counter generated a new counter variable, but there should have only been one counter variable per function. This appears to have bloated .profraw files significantly. (For a small program, it increased the size by about 40%. I have not tested large programs, but there is anecdotal evidence that profraw files were way too large. This is a good fix, regardless, but hopefully it also addresses related issues. Fixes: #82144 Invalid LLVM coverage data produced when compiled with -C opt-level=1 Existing tests now work up to at least `opt-level=3`. This required a detailed analysis of the LLVM IR, comparisons with Clang C++ LLVM IR when compiled with coverage, and a lot of trial and error with codegen adjustments. The biggest hurdle was figuring out how to continue to support coverage results for unused functions and generics. Rust's coverage results have three advantages over Clang's coverage results: 1. Rust's coverage map does not include any overlapping code regions, making coverage counting unambiguous. 2. Rust generates coverage results (showing zero counts) for all unused functions, including generics. (Clang does not generate coverage for uninstantiated template functions.) 3. Rust's unused functions produce minimal stubbed functions in LLVM IR, sufficient for including in the coverage results; while Clang must generate the complete LLVM IR for each unused function, even though it will never be called. This PR removes the previous hack of attempting to inject coverage into some other existing function instance, and generates dedicated instances for each unused function. This change, and a few other adjustments (similar to what is required for `-C link-dead-code`, but with lower impact), makes it possible to support LLVM optimizations. Fixes: #79651 Coverage report: "Unexecuted instantiation:..." for a generic function from multiple crates Fixed by removing the aforementioned hack. Some "Unexecuted instantiation" notices are unavoidable, as explained in the `used_crate.rs` test, but `-Zinstrument-coverage` has new options to back off support for either unused generics, or all unused functions, which avoids the notice, at the cost of less coverage of unused functions. Fixes: #82875 Invalid LLVM coverage data produced with crate brotli_decompressor Fixed by disabling the LLVM function attribute that forces inlining, if `-Z instrument-coverage` is enabled. This attribute is applied to Rust functions with `#[inline(always)], and in some cases, the forced inlining breaks coverage instrumentation and reports.
2021-03-15 18:32:45 -05:00
5| |use std::fmt::Debug;
6| |
7| 1|pub fn used_function() {
2021-04-26 18:27:54 -05:00
8| 1| // Initialize test constants in a way that cannot be determined at compile time, to ensure
9| 1| // rustc and LLVM cannot optimize out statements (or coverage counters) downstream from
10| 1| // dependent conditions.
coverage bug fixes and optimization support Adjusted LLVM codegen for code compiled with `-Zinstrument-coverage` to address multiple, somewhat related issues. Fixed a significant flaw in prior coverage solution: Every counter generated a new counter variable, but there should have only been one counter variable per function. This appears to have bloated .profraw files significantly. (For a small program, it increased the size by about 40%. I have not tested large programs, but there is anecdotal evidence that profraw files were way too large. This is a good fix, regardless, but hopefully it also addresses related issues. Fixes: #82144 Invalid LLVM coverage data produced when compiled with -C opt-level=1 Existing tests now work up to at least `opt-level=3`. This required a detailed analysis of the LLVM IR, comparisons with Clang C++ LLVM IR when compiled with coverage, and a lot of trial and error with codegen adjustments. The biggest hurdle was figuring out how to continue to support coverage results for unused functions and generics. Rust's coverage results have three advantages over Clang's coverage results: 1. Rust's coverage map does not include any overlapping code regions, making coverage counting unambiguous. 2. Rust generates coverage results (showing zero counts) for all unused functions, including generics. (Clang does not generate coverage for uninstantiated template functions.) 3. Rust's unused functions produce minimal stubbed functions in LLVM IR, sufficient for including in the coverage results; while Clang must generate the complete LLVM IR for each unused function, even though it will never be called. This PR removes the previous hack of attempting to inject coverage into some other existing function instance, and generates dedicated instances for each unused function. This change, and a few other adjustments (similar to what is required for `-C link-dead-code`, but with lower impact), makes it possible to support LLVM optimizations. Fixes: #79651 Coverage report: "Unexecuted instantiation:..." for a generic function from multiple crates Fixed by removing the aforementioned hack. Some "Unexecuted instantiation" notices are unavoidable, as explained in the `used_crate.rs` test, but `-Zinstrument-coverage` has new options to back off support for either unused generics, or all unused functions, which avoids the notice, at the cost of less coverage of unused functions. Fixes: #82875 Invalid LLVM coverage data produced with crate brotli_decompressor Fixed by disabling the LLVM function attribute that forces inlining, if `-Z instrument-coverage` is enabled. This attribute is applied to Rust functions with `#[inline(always)], and in some cases, the forced inlining breaks coverage instrumentation and reports.
2021-03-15 18:32:45 -05:00
11| 1| let is_true = std::env::args().len() == 1;
12| 1| let mut countdown = 0;
13| 1| if is_true {
14| 1| countdown = 10;
15| 1| }
^0
16| 1| use_this_lib_crate();
17| 1|}
18| |
19| |#[inline(always)]
20| 1|pub fn used_inline_function() {
2021-04-26 18:27:54 -05:00
21| 1| // Initialize test constants in a way that cannot be determined at compile time, to ensure
22| 1| // rustc and LLVM cannot optimize out statements (or coverage counters) downstream from
23| 1| // dependent conditions.
coverage bug fixes and optimization support Adjusted LLVM codegen for code compiled with `-Zinstrument-coverage` to address multiple, somewhat related issues. Fixed a significant flaw in prior coverage solution: Every counter generated a new counter variable, but there should have only been one counter variable per function. This appears to have bloated .profraw files significantly. (For a small program, it increased the size by about 40%. I have not tested large programs, but there is anecdotal evidence that profraw files were way too large. This is a good fix, regardless, but hopefully it also addresses related issues. Fixes: #82144 Invalid LLVM coverage data produced when compiled with -C opt-level=1 Existing tests now work up to at least `opt-level=3`. This required a detailed analysis of the LLVM IR, comparisons with Clang C++ LLVM IR when compiled with coverage, and a lot of trial and error with codegen adjustments. The biggest hurdle was figuring out how to continue to support coverage results for unused functions and generics. Rust's coverage results have three advantages over Clang's coverage results: 1. Rust's coverage map does not include any overlapping code regions, making coverage counting unambiguous. 2. Rust generates coverage results (showing zero counts) for all unused functions, including generics. (Clang does not generate coverage for uninstantiated template functions.) 3. Rust's unused functions produce minimal stubbed functions in LLVM IR, sufficient for including in the coverage results; while Clang must generate the complete LLVM IR for each unused function, even though it will never be called. This PR removes the previous hack of attempting to inject coverage into some other existing function instance, and generates dedicated instances for each unused function. This change, and a few other adjustments (similar to what is required for `-C link-dead-code`, but with lower impact), makes it possible to support LLVM optimizations. Fixes: #79651 Coverage report: "Unexecuted instantiation:..." for a generic function from multiple crates Fixed by removing the aforementioned hack. Some "Unexecuted instantiation" notices are unavoidable, as explained in the `used_crate.rs` test, but `-Zinstrument-coverage` has new options to back off support for either unused generics, or all unused functions, which avoids the notice, at the cost of less coverage of unused functions. Fixes: #82875 Invalid LLVM coverage data produced with crate brotli_decompressor Fixed by disabling the LLVM function attribute that forces inlining, if `-Z instrument-coverage` is enabled. This attribute is applied to Rust functions with `#[inline(always)], and in some cases, the forced inlining breaks coverage instrumentation and reports.
2021-03-15 18:32:45 -05:00
24| 1| let is_true = std::env::args().len() == 1;
25| 1| let mut countdown = 0;
26| 1| if is_true {
27| 1| countdown = 10;
28| 1| }
^0
29| 1| use_this_lib_crate();
30| 1|}
31| |
2021-03-30 01:03:41 -05:00
32| |
33| |
34| |
35| |
36| |
37| |
38| |#[inline(always)]
39| 2|pub fn used_only_from_bin_crate_generic_function<T: Debug>(arg: T) {
40| 2| println!("used_only_from_bin_crate_generic_function with {:?}", arg);
41| 2|}
coverage bug fixes and optimization support Adjusted LLVM codegen for code compiled with `-Zinstrument-coverage` to address multiple, somewhat related issues. Fixed a significant flaw in prior coverage solution: Every counter generated a new counter variable, but there should have only been one counter variable per function. This appears to have bloated .profraw files significantly. (For a small program, it increased the size by about 40%. I have not tested large programs, but there is anecdotal evidence that profraw files were way too large. This is a good fix, regardless, but hopefully it also addresses related issues. Fixes: #82144 Invalid LLVM coverage data produced when compiled with -C opt-level=1 Existing tests now work up to at least `opt-level=3`. This required a detailed analysis of the LLVM IR, comparisons with Clang C++ LLVM IR when compiled with coverage, and a lot of trial and error with codegen adjustments. The biggest hurdle was figuring out how to continue to support coverage results for unused functions and generics. Rust's coverage results have three advantages over Clang's coverage results: 1. Rust's coverage map does not include any overlapping code regions, making coverage counting unambiguous. 2. Rust generates coverage results (showing zero counts) for all unused functions, including generics. (Clang does not generate coverage for uninstantiated template functions.) 3. Rust's unused functions produce minimal stubbed functions in LLVM IR, sufficient for including in the coverage results; while Clang must generate the complete LLVM IR for each unused function, even though it will never be called. This PR removes the previous hack of attempting to inject coverage into some other existing function instance, and generates dedicated instances for each unused function. This change, and a few other adjustments (similar to what is required for `-C link-dead-code`, but with lower impact), makes it possible to support LLVM optimizations. Fixes: #79651 Coverage report: "Unexecuted instantiation:..." for a generic function from multiple crates Fixed by removing the aforementioned hack. Some "Unexecuted instantiation" notices are unavoidable, as explained in the `used_crate.rs` test, but `-Zinstrument-coverage` has new options to back off support for either unused generics, or all unused functions, which avoids the notice, at the cost of less coverage of unused functions. Fixes: #82875 Invalid LLVM coverage data produced with crate brotli_decompressor Fixed by disabling the LLVM function attribute that forces inlining, if `-Z instrument-coverage` is enabled. This attribute is applied to Rust functions with `#[inline(always)], and in some cases, the forced inlining breaks coverage instrumentation and reports.
2021-03-15 18:32:45 -05:00
------------------
| Unexecuted instantiation: used_inline_crate::used_only_from_bin_crate_generic_function::<_>
------------------
| used_inline_crate::used_only_from_bin_crate_generic_function::<&alloc::vec::Vec<i32>>:
2021-03-30 01:03:41 -05:00
| 39| 1|pub fn used_only_from_bin_crate_generic_function<T: Debug>(arg: T) {
| 40| 1| println!("used_only_from_bin_crate_generic_function with {:?}", arg);
| 41| 1|}
coverage bug fixes and optimization support Adjusted LLVM codegen for code compiled with `-Zinstrument-coverage` to address multiple, somewhat related issues. Fixed a significant flaw in prior coverage solution: Every counter generated a new counter variable, but there should have only been one counter variable per function. This appears to have bloated .profraw files significantly. (For a small program, it increased the size by about 40%. I have not tested large programs, but there is anecdotal evidence that profraw files were way too large. This is a good fix, regardless, but hopefully it also addresses related issues. Fixes: #82144 Invalid LLVM coverage data produced when compiled with -C opt-level=1 Existing tests now work up to at least `opt-level=3`. This required a detailed analysis of the LLVM IR, comparisons with Clang C++ LLVM IR when compiled with coverage, and a lot of trial and error with codegen adjustments. The biggest hurdle was figuring out how to continue to support coverage results for unused functions and generics. Rust's coverage results have three advantages over Clang's coverage results: 1. Rust's coverage map does not include any overlapping code regions, making coverage counting unambiguous. 2. Rust generates coverage results (showing zero counts) for all unused functions, including generics. (Clang does not generate coverage for uninstantiated template functions.) 3. Rust's unused functions produce minimal stubbed functions in LLVM IR, sufficient for including in the coverage results; while Clang must generate the complete LLVM IR for each unused function, even though it will never be called. This PR removes the previous hack of attempting to inject coverage into some other existing function instance, and generates dedicated instances for each unused function. This change, and a few other adjustments (similar to what is required for `-C link-dead-code`, but with lower impact), makes it possible to support LLVM optimizations. Fixes: #79651 Coverage report: "Unexecuted instantiation:..." for a generic function from multiple crates Fixed by removing the aforementioned hack. Some "Unexecuted instantiation" notices are unavoidable, as explained in the `used_crate.rs` test, but `-Zinstrument-coverage` has new options to back off support for either unused generics, or all unused functions, which avoids the notice, at the cost of less coverage of unused functions. Fixes: #82875 Invalid LLVM coverage data produced with crate brotli_decompressor Fixed by disabling the LLVM function attribute that forces inlining, if `-Z instrument-coverage` is enabled. This attribute is applied to Rust functions with `#[inline(always)], and in some cases, the forced inlining breaks coverage instrumentation and reports.
2021-03-15 18:32:45 -05:00
------------------
| used_inline_crate::used_only_from_bin_crate_generic_function::<&str>:
2021-03-30 01:03:41 -05:00
| 39| 1|pub fn used_only_from_bin_crate_generic_function<T: Debug>(arg: T) {
| 40| 1| println!("used_only_from_bin_crate_generic_function with {:?}", arg);
| 41| 1|}
coverage bug fixes and optimization support Adjusted LLVM codegen for code compiled with `-Zinstrument-coverage` to address multiple, somewhat related issues. Fixed a significant flaw in prior coverage solution: Every counter generated a new counter variable, but there should have only been one counter variable per function. This appears to have bloated .profraw files significantly. (For a small program, it increased the size by about 40%. I have not tested large programs, but there is anecdotal evidence that profraw files were way too large. This is a good fix, regardless, but hopefully it also addresses related issues. Fixes: #82144 Invalid LLVM coverage data produced when compiled with -C opt-level=1 Existing tests now work up to at least `opt-level=3`. This required a detailed analysis of the LLVM IR, comparisons with Clang C++ LLVM IR when compiled with coverage, and a lot of trial and error with codegen adjustments. The biggest hurdle was figuring out how to continue to support coverage results for unused functions and generics. Rust's coverage results have three advantages over Clang's coverage results: 1. Rust's coverage map does not include any overlapping code regions, making coverage counting unambiguous. 2. Rust generates coverage results (showing zero counts) for all unused functions, including generics. (Clang does not generate coverage for uninstantiated template functions.) 3. Rust's unused functions produce minimal stubbed functions in LLVM IR, sufficient for including in the coverage results; while Clang must generate the complete LLVM IR for each unused function, even though it will never be called. This PR removes the previous hack of attempting to inject coverage into some other existing function instance, and generates dedicated instances for each unused function. This change, and a few other adjustments (similar to what is required for `-C link-dead-code`, but with lower impact), makes it possible to support LLVM optimizations. Fixes: #79651 Coverage report: "Unexecuted instantiation:..." for a generic function from multiple crates Fixed by removing the aforementioned hack. Some "Unexecuted instantiation" notices are unavoidable, as explained in the `used_crate.rs` test, but `-Zinstrument-coverage` has new options to back off support for either unused generics, or all unused functions, which avoids the notice, at the cost of less coverage of unused functions. Fixes: #82875 Invalid LLVM coverage data produced with crate brotli_decompressor Fixed by disabling the LLVM function attribute that forces inlining, if `-Z instrument-coverage` is enabled. This attribute is applied to Rust functions with `#[inline(always)], and in some cases, the forced inlining breaks coverage instrumentation and reports.
2021-03-15 18:32:45 -05:00
------------------
2021-03-30 01:03:41 -05:00
42| |// Expect for above function: `Unexecuted instantiation` (see notes in `used_crate.rs`)
43| |
44| |#[inline(always)]
45| 4|pub fn used_only_from_this_lib_crate_generic_function<T: Debug>(arg: T) {
46| 4| println!("used_only_from_this_lib_crate_generic_function with {:?}", arg);
47| 4|}
coverage bug fixes and optimization support Adjusted LLVM codegen for code compiled with `-Zinstrument-coverage` to address multiple, somewhat related issues. Fixed a significant flaw in prior coverage solution: Every counter generated a new counter variable, but there should have only been one counter variable per function. This appears to have bloated .profraw files significantly. (For a small program, it increased the size by about 40%. I have not tested large programs, but there is anecdotal evidence that profraw files were way too large. This is a good fix, regardless, but hopefully it also addresses related issues. Fixes: #82144 Invalid LLVM coverage data produced when compiled with -C opt-level=1 Existing tests now work up to at least `opt-level=3`. This required a detailed analysis of the LLVM IR, comparisons with Clang C++ LLVM IR when compiled with coverage, and a lot of trial and error with codegen adjustments. The biggest hurdle was figuring out how to continue to support coverage results for unused functions and generics. Rust's coverage results have three advantages over Clang's coverage results: 1. Rust's coverage map does not include any overlapping code regions, making coverage counting unambiguous. 2. Rust generates coverage results (showing zero counts) for all unused functions, including generics. (Clang does not generate coverage for uninstantiated template functions.) 3. Rust's unused functions produce minimal stubbed functions in LLVM IR, sufficient for including in the coverage results; while Clang must generate the complete LLVM IR for each unused function, even though it will never be called. This PR removes the previous hack of attempting to inject coverage into some other existing function instance, and generates dedicated instances for each unused function. This change, and a few other adjustments (similar to what is required for `-C link-dead-code`, but with lower impact), makes it possible to support LLVM optimizations. Fixes: #79651 Coverage report: "Unexecuted instantiation:..." for a generic function from multiple crates Fixed by removing the aforementioned hack. Some "Unexecuted instantiation" notices are unavoidable, as explained in the `used_crate.rs` test, but `-Zinstrument-coverage` has new options to back off support for either unused generics, or all unused functions, which avoids the notice, at the cost of less coverage of unused functions. Fixes: #82875 Invalid LLVM coverage data produced with crate brotli_decompressor Fixed by disabling the LLVM function attribute that forces inlining, if `-Z instrument-coverage` is enabled. This attribute is applied to Rust functions with `#[inline(always)], and in some cases, the forced inlining breaks coverage instrumentation and reports.
2021-03-15 18:32:45 -05:00
------------------
2022-09-05 08:42:17 -05:00
| used_inline_crate::used_only_from_this_lib_crate_generic_function::<&str>:
2021-03-30 01:03:41 -05:00
| 45| 2|pub fn used_only_from_this_lib_crate_generic_function<T: Debug>(arg: T) {
| 46| 2| println!("used_only_from_this_lib_crate_generic_function with {:?}", arg);
| 47| 2|}
coverage bug fixes and optimization support Adjusted LLVM codegen for code compiled with `-Zinstrument-coverage` to address multiple, somewhat related issues. Fixed a significant flaw in prior coverage solution: Every counter generated a new counter variable, but there should have only been one counter variable per function. This appears to have bloated .profraw files significantly. (For a small program, it increased the size by about 40%. I have not tested large programs, but there is anecdotal evidence that profraw files were way too large. This is a good fix, regardless, but hopefully it also addresses related issues. Fixes: #82144 Invalid LLVM coverage data produced when compiled with -C opt-level=1 Existing tests now work up to at least `opt-level=3`. This required a detailed analysis of the LLVM IR, comparisons with Clang C++ LLVM IR when compiled with coverage, and a lot of trial and error with codegen adjustments. The biggest hurdle was figuring out how to continue to support coverage results for unused functions and generics. Rust's coverage results have three advantages over Clang's coverage results: 1. Rust's coverage map does not include any overlapping code regions, making coverage counting unambiguous. 2. Rust generates coverage results (showing zero counts) for all unused functions, including generics. (Clang does not generate coverage for uninstantiated template functions.) 3. Rust's unused functions produce minimal stubbed functions in LLVM IR, sufficient for including in the coverage results; while Clang must generate the complete LLVM IR for each unused function, even though it will never be called. This PR removes the previous hack of attempting to inject coverage into some other existing function instance, and generates dedicated instances for each unused function. This change, and a few other adjustments (similar to what is required for `-C link-dead-code`, but with lower impact), makes it possible to support LLVM optimizations. Fixes: #79651 Coverage report: "Unexecuted instantiation:..." for a generic function from multiple crates Fixed by removing the aforementioned hack. Some "Unexecuted instantiation" notices are unavoidable, as explained in the `used_crate.rs` test, but `-Zinstrument-coverage` has new options to back off support for either unused generics, or all unused functions, which avoids the notice, at the cost of less coverage of unused functions. Fixes: #82875 Invalid LLVM coverage data produced with crate brotli_decompressor Fixed by disabling the LLVM function attribute that forces inlining, if `-Z instrument-coverage` is enabled. This attribute is applied to Rust functions with `#[inline(always)], and in some cases, the forced inlining breaks coverage instrumentation and reports.
2021-03-15 18:32:45 -05:00
------------------
2022-09-05 08:42:17 -05:00
| used_inline_crate::used_only_from_this_lib_crate_generic_function::<alloc::vec::Vec<i32>>:
2021-03-30 01:03:41 -05:00
| 45| 2|pub fn used_only_from_this_lib_crate_generic_function<T: Debug>(arg: T) {
| 46| 2| println!("used_only_from_this_lib_crate_generic_function with {:?}", arg);
| 47| 2|}
coverage bug fixes and optimization support Adjusted LLVM codegen for code compiled with `-Zinstrument-coverage` to address multiple, somewhat related issues. Fixed a significant flaw in prior coverage solution: Every counter generated a new counter variable, but there should have only been one counter variable per function. This appears to have bloated .profraw files significantly. (For a small program, it increased the size by about 40%. I have not tested large programs, but there is anecdotal evidence that profraw files were way too large. This is a good fix, regardless, but hopefully it also addresses related issues. Fixes: #82144 Invalid LLVM coverage data produced when compiled with -C opt-level=1 Existing tests now work up to at least `opt-level=3`. This required a detailed analysis of the LLVM IR, comparisons with Clang C++ LLVM IR when compiled with coverage, and a lot of trial and error with codegen adjustments. The biggest hurdle was figuring out how to continue to support coverage results for unused functions and generics. Rust's coverage results have three advantages over Clang's coverage results: 1. Rust's coverage map does not include any overlapping code regions, making coverage counting unambiguous. 2. Rust generates coverage results (showing zero counts) for all unused functions, including generics. (Clang does not generate coverage for uninstantiated template functions.) 3. Rust's unused functions produce minimal stubbed functions in LLVM IR, sufficient for including in the coverage results; while Clang must generate the complete LLVM IR for each unused function, even though it will never be called. This PR removes the previous hack of attempting to inject coverage into some other existing function instance, and generates dedicated instances for each unused function. This change, and a few other adjustments (similar to what is required for `-C link-dead-code`, but with lower impact), makes it possible to support LLVM optimizations. Fixes: #79651 Coverage report: "Unexecuted instantiation:..." for a generic function from multiple crates Fixed by removing the aforementioned hack. Some "Unexecuted instantiation" notices are unavoidable, as explained in the `used_crate.rs` test, but `-Zinstrument-coverage` has new options to back off support for either unused generics, or all unused functions, which avoids the notice, at the cost of less coverage of unused functions. Fixes: #82875 Invalid LLVM coverage data produced with crate brotli_decompressor Fixed by disabling the LLVM function attribute that forces inlining, if `-Z instrument-coverage` is enabled. This attribute is applied to Rust functions with `#[inline(always)], and in some cases, the forced inlining breaks coverage instrumentation and reports.
2021-03-15 18:32:45 -05:00
------------------
2021-03-30 01:03:41 -05:00
48| |
49| |#[inline(always)]
50| 3|pub fn used_from_bin_crate_and_lib_crate_generic_function<T: Debug>(arg: T) {
51| 3| println!("used_from_bin_crate_and_lib_crate_generic_function with {:?}", arg);
52| 3|}
coverage bug fixes and optimization support Adjusted LLVM codegen for code compiled with `-Zinstrument-coverage` to address multiple, somewhat related issues. Fixed a significant flaw in prior coverage solution: Every counter generated a new counter variable, but there should have only been one counter variable per function. This appears to have bloated .profraw files significantly. (For a small program, it increased the size by about 40%. I have not tested large programs, but there is anecdotal evidence that profraw files were way too large. This is a good fix, regardless, but hopefully it also addresses related issues. Fixes: #82144 Invalid LLVM coverage data produced when compiled with -C opt-level=1 Existing tests now work up to at least `opt-level=3`. This required a detailed analysis of the LLVM IR, comparisons with Clang C++ LLVM IR when compiled with coverage, and a lot of trial and error with codegen adjustments. The biggest hurdle was figuring out how to continue to support coverage results for unused functions and generics. Rust's coverage results have three advantages over Clang's coverage results: 1. Rust's coverage map does not include any overlapping code regions, making coverage counting unambiguous. 2. Rust generates coverage results (showing zero counts) for all unused functions, including generics. (Clang does not generate coverage for uninstantiated template functions.) 3. Rust's unused functions produce minimal stubbed functions in LLVM IR, sufficient for including in the coverage results; while Clang must generate the complete LLVM IR for each unused function, even though it will never be called. This PR removes the previous hack of attempting to inject coverage into some other existing function instance, and generates dedicated instances for each unused function. This change, and a few other adjustments (similar to what is required for `-C link-dead-code`, but with lower impact), makes it possible to support LLVM optimizations. Fixes: #79651 Coverage report: "Unexecuted instantiation:..." for a generic function from multiple crates Fixed by removing the aforementioned hack. Some "Unexecuted instantiation" notices are unavoidable, as explained in the `used_crate.rs` test, but `-Zinstrument-coverage` has new options to back off support for either unused generics, or all unused functions, which avoids the notice, at the cost of less coverage of unused functions. Fixes: #82875 Invalid LLVM coverage data produced with crate brotli_decompressor Fixed by disabling the LLVM function attribute that forces inlining, if `-Z instrument-coverage` is enabled. This attribute is applied to Rust functions with `#[inline(always)], and in some cases, the forced inlining breaks coverage instrumentation and reports.
2021-03-15 18:32:45 -05:00
------------------
| used_inline_crate::used_from_bin_crate_and_lib_crate_generic_function::<&str>:
2021-03-30 01:03:41 -05:00
| 50| 2|pub fn used_from_bin_crate_and_lib_crate_generic_function<T: Debug>(arg: T) {
| 51| 2| println!("used_from_bin_crate_and_lib_crate_generic_function with {:?}", arg);
| 52| 2|}
------------------
| used_inline_crate::used_from_bin_crate_and_lib_crate_generic_function::<alloc::vec::Vec<i32>>:
| 50| 1|pub fn used_from_bin_crate_and_lib_crate_generic_function<T: Debug>(arg: T) {
| 51| 1| println!("used_from_bin_crate_and_lib_crate_generic_function with {:?}", arg);
| 52| 1|}
coverage bug fixes and optimization support Adjusted LLVM codegen for code compiled with `-Zinstrument-coverage` to address multiple, somewhat related issues. Fixed a significant flaw in prior coverage solution: Every counter generated a new counter variable, but there should have only been one counter variable per function. This appears to have bloated .profraw files significantly. (For a small program, it increased the size by about 40%. I have not tested large programs, but there is anecdotal evidence that profraw files were way too large. This is a good fix, regardless, but hopefully it also addresses related issues. Fixes: #82144 Invalid LLVM coverage data produced when compiled with -C opt-level=1 Existing tests now work up to at least `opt-level=3`. This required a detailed analysis of the LLVM IR, comparisons with Clang C++ LLVM IR when compiled with coverage, and a lot of trial and error with codegen adjustments. The biggest hurdle was figuring out how to continue to support coverage results for unused functions and generics. Rust's coverage results have three advantages over Clang's coverage results: 1. Rust's coverage map does not include any overlapping code regions, making coverage counting unambiguous. 2. Rust generates coverage results (showing zero counts) for all unused functions, including generics. (Clang does not generate coverage for uninstantiated template functions.) 3. Rust's unused functions produce minimal stubbed functions in LLVM IR, sufficient for including in the coverage results; while Clang must generate the complete LLVM IR for each unused function, even though it will never be called. This PR removes the previous hack of attempting to inject coverage into some other existing function instance, and generates dedicated instances for each unused function. This change, and a few other adjustments (similar to what is required for `-C link-dead-code`, but with lower impact), makes it possible to support LLVM optimizations. Fixes: #79651 Coverage report: "Unexecuted instantiation:..." for a generic function from multiple crates Fixed by removing the aforementioned hack. Some "Unexecuted instantiation" notices are unavoidable, as explained in the `used_crate.rs` test, but `-Zinstrument-coverage` has new options to back off support for either unused generics, or all unused functions, which avoids the notice, at the cost of less coverage of unused functions. Fixes: #82875 Invalid LLVM coverage data produced with crate brotli_decompressor Fixed by disabling the LLVM function attribute that forces inlining, if `-Z instrument-coverage` is enabled. This attribute is applied to Rust functions with `#[inline(always)], and in some cases, the forced inlining breaks coverage instrumentation and reports.
2021-03-15 18:32:45 -05:00
------------------
2021-03-30 01:03:41 -05:00
53| |
54| |#[inline(always)]
55| 3|pub fn used_with_same_type_from_bin_crate_and_lib_crate_generic_function<T: Debug>(arg: T) {
56| 3| println!("used_with_same_type_from_bin_crate_and_lib_crate_generic_function with {:?}", arg);
57| 3|}
coverage bug fixes and optimization support Adjusted LLVM codegen for code compiled with `-Zinstrument-coverage` to address multiple, somewhat related issues. Fixed a significant flaw in prior coverage solution: Every counter generated a new counter variable, but there should have only been one counter variable per function. This appears to have bloated .profraw files significantly. (For a small program, it increased the size by about 40%. I have not tested large programs, but there is anecdotal evidence that profraw files were way too large. This is a good fix, regardless, but hopefully it also addresses related issues. Fixes: #82144 Invalid LLVM coverage data produced when compiled with -C opt-level=1 Existing tests now work up to at least `opt-level=3`. This required a detailed analysis of the LLVM IR, comparisons with Clang C++ LLVM IR when compiled with coverage, and a lot of trial and error with codegen adjustments. The biggest hurdle was figuring out how to continue to support coverage results for unused functions and generics. Rust's coverage results have three advantages over Clang's coverage results: 1. Rust's coverage map does not include any overlapping code regions, making coverage counting unambiguous. 2. Rust generates coverage results (showing zero counts) for all unused functions, including generics. (Clang does not generate coverage for uninstantiated template functions.) 3. Rust's unused functions produce minimal stubbed functions in LLVM IR, sufficient for including in the coverage results; while Clang must generate the complete LLVM IR for each unused function, even though it will never be called. This PR removes the previous hack of attempting to inject coverage into some other existing function instance, and generates dedicated instances for each unused function. This change, and a few other adjustments (similar to what is required for `-C link-dead-code`, but with lower impact), makes it possible to support LLVM optimizations. Fixes: #79651 Coverage report: "Unexecuted instantiation:..." for a generic function from multiple crates Fixed by removing the aforementioned hack. Some "Unexecuted instantiation" notices are unavoidable, as explained in the `used_crate.rs` test, but `-Zinstrument-coverage` has new options to back off support for either unused generics, or all unused functions, which avoids the notice, at the cost of less coverage of unused functions. Fixes: #82875 Invalid LLVM coverage data produced with crate brotli_decompressor Fixed by disabling the LLVM function attribute that forces inlining, if `-Z instrument-coverage` is enabled. This attribute is applied to Rust functions with `#[inline(always)], and in some cases, the forced inlining breaks coverage instrumentation and reports.
2021-03-15 18:32:45 -05:00
------------------
| used_inline_crate::used_with_same_type_from_bin_crate_and_lib_crate_generic_function::<&str>:
2021-03-30 01:03:41 -05:00
| 55| 1|pub fn used_with_same_type_from_bin_crate_and_lib_crate_generic_function<T: Debug>(arg: T) {
| 56| 1| println!("used_with_same_type_from_bin_crate_and_lib_crate_generic_function with {:?}", arg);
| 57| 1|}
coverage bug fixes and optimization support Adjusted LLVM codegen for code compiled with `-Zinstrument-coverage` to address multiple, somewhat related issues. Fixed a significant flaw in prior coverage solution: Every counter generated a new counter variable, but there should have only been one counter variable per function. This appears to have bloated .profraw files significantly. (For a small program, it increased the size by about 40%. I have not tested large programs, but there is anecdotal evidence that profraw files were way too large. This is a good fix, regardless, but hopefully it also addresses related issues. Fixes: #82144 Invalid LLVM coverage data produced when compiled with -C opt-level=1 Existing tests now work up to at least `opt-level=3`. This required a detailed analysis of the LLVM IR, comparisons with Clang C++ LLVM IR when compiled with coverage, and a lot of trial and error with codegen adjustments. The biggest hurdle was figuring out how to continue to support coverage results for unused functions and generics. Rust's coverage results have three advantages over Clang's coverage results: 1. Rust's coverage map does not include any overlapping code regions, making coverage counting unambiguous. 2. Rust generates coverage results (showing zero counts) for all unused functions, including generics. (Clang does not generate coverage for uninstantiated template functions.) 3. Rust's unused functions produce minimal stubbed functions in LLVM IR, sufficient for including in the coverage results; while Clang must generate the complete LLVM IR for each unused function, even though it will never be called. This PR removes the previous hack of attempting to inject coverage into some other existing function instance, and generates dedicated instances for each unused function. This change, and a few other adjustments (similar to what is required for `-C link-dead-code`, but with lower impact), makes it possible to support LLVM optimizations. Fixes: #79651 Coverage report: "Unexecuted instantiation:..." for a generic function from multiple crates Fixed by removing the aforementioned hack. Some "Unexecuted instantiation" notices are unavoidable, as explained in the `used_crate.rs` test, but `-Zinstrument-coverage` has new options to back off support for either unused generics, or all unused functions, which avoids the notice, at the cost of less coverage of unused functions. Fixes: #82875 Invalid LLVM coverage data produced with crate brotli_decompressor Fixed by disabling the LLVM function attribute that forces inlining, if `-Z instrument-coverage` is enabled. This attribute is applied to Rust functions with `#[inline(always)], and in some cases, the forced inlining breaks coverage instrumentation and reports.
2021-03-15 18:32:45 -05:00
------------------
| used_inline_crate::used_with_same_type_from_bin_crate_and_lib_crate_generic_function::<&str>:
2021-03-30 01:03:41 -05:00
| 55| 2|pub fn used_with_same_type_from_bin_crate_and_lib_crate_generic_function<T: Debug>(arg: T) {
| 56| 2| println!("used_with_same_type_from_bin_crate_and_lib_crate_generic_function with {:?}", arg);
| 57| 2|}
------------------
2021-03-30 01:03:41 -05:00
58| |
59| |#[inline(always)]
60| 0|pub fn unused_generic_function<T: Debug>(arg: T) {
61| 0| println!("unused_generic_function with {:?}", arg);
62| 0|}
63| |
64| |#[inline(always)]
65| 0|pub fn unused_function() {
66| 0| let is_true = std::env::args().len() == 1;
67| 0| let mut countdown = 2;
68| 0| if !is_true {
69| 0| countdown = 20;
70| 0| }
71| 0|}
72| |
73| |#[inline(always)]
74| 0|fn unused_private_function() {
75| 0| let is_true = std::env::args().len() == 1;
76| 0| let mut countdown = 2;
77| 0| if !is_true {
78| 0| countdown = 20;
79| 0| }
80| 0|}
81| |
82| 2|fn use_this_lib_crate() {
83| 2| used_from_bin_crate_and_lib_crate_generic_function("used from library used_crate.rs");
84| 2| used_with_same_type_from_bin_crate_and_lib_crate_generic_function(
85| 2| "used from library used_crate.rs",
86| 2| );
87| 2| let some_vec = vec![5, 6, 7, 8];
88| 2| used_only_from_this_lib_crate_generic_function(some_vec);
89| 2| used_only_from_this_lib_crate_generic_function("used ONLY from library used_crate.rs");
90| 2|}
coverage bug fixes and optimization support Adjusted LLVM codegen for code compiled with `-Zinstrument-coverage` to address multiple, somewhat related issues. Fixed a significant flaw in prior coverage solution: Every counter generated a new counter variable, but there should have only been one counter variable per function. This appears to have bloated .profraw files significantly. (For a small program, it increased the size by about 40%. I have not tested large programs, but there is anecdotal evidence that profraw files were way too large. This is a good fix, regardless, but hopefully it also addresses related issues. Fixes: #82144 Invalid LLVM coverage data produced when compiled with -C opt-level=1 Existing tests now work up to at least `opt-level=3`. This required a detailed analysis of the LLVM IR, comparisons with Clang C++ LLVM IR when compiled with coverage, and a lot of trial and error with codegen adjustments. The biggest hurdle was figuring out how to continue to support coverage results for unused functions and generics. Rust's coverage results have three advantages over Clang's coverage results: 1. Rust's coverage map does not include any overlapping code regions, making coverage counting unambiguous. 2. Rust generates coverage results (showing zero counts) for all unused functions, including generics. (Clang does not generate coverage for uninstantiated template functions.) 3. Rust's unused functions produce minimal stubbed functions in LLVM IR, sufficient for including in the coverage results; while Clang must generate the complete LLVM IR for each unused function, even though it will never be called. This PR removes the previous hack of attempting to inject coverage into some other existing function instance, and generates dedicated instances for each unused function. This change, and a few other adjustments (similar to what is required for `-C link-dead-code`, but with lower impact), makes it possible to support LLVM optimizations. Fixes: #79651 Coverage report: "Unexecuted instantiation:..." for a generic function from multiple crates Fixed by removing the aforementioned hack. Some "Unexecuted instantiation" notices are unavoidable, as explained in the `used_crate.rs` test, but `-Zinstrument-coverage` has new options to back off support for either unused generics, or all unused functions, which avoids the notice, at the cost of less coverage of unused functions. Fixes: #82875 Invalid LLVM coverage data produced with crate brotli_decompressor Fixed by disabling the LLVM function attribute that forces inlining, if `-Z instrument-coverage` is enabled. This attribute is applied to Rust functions with `#[inline(always)], and in some cases, the forced inlining breaks coverage instrumentation and reports.
2021-03-15 18:32:45 -05:00
2023-06-12 03:07:04 -05:00
$DIR/uses_inline_crate.rs:
2023-07-05 19:19:31 -05:00
1| |// This test was failing on Linux for a while due to #110393 somehow making
2| |// the unused functions not instrumented, but it seems to be fine now.
2023-06-12 03:07:04 -05:00
3| |
4| |// Validates coverage now works with optimizations
5| |// compile-flags: -C opt-level=3
6| |
7| |#![allow(unused_assignments, unused_variables)]
8| |
9| |// aux-build:used_inline_crate.rs
10| |extern crate used_inline_crate;
11| |
12| 1|fn main() {
13| 1| used_inline_crate::used_function();
14| 1| used_inline_crate::used_inline_function();
15| 1| let some_vec = vec![1, 2, 3, 4];
16| 1| used_inline_crate::used_only_from_bin_crate_generic_function(&some_vec);
17| 1| used_inline_crate::used_only_from_bin_crate_generic_function("used from bin uses_crate.rs");
18| 1| used_inline_crate::used_from_bin_crate_and_lib_crate_generic_function(some_vec);
19| 1| used_inline_crate::used_with_same_type_from_bin_crate_and_lib_crate_generic_function(
20| 1| "interesting?",
21| 1| );
22| 1|}