mikros/rust
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
8f6855c8c8
rust/mk/target.mk

180 lines
6.8 KiB
Makefile
Raw Normal View History

Reliciense makefiles and testsuite. Yup.
2012-12-10 19:32:48 -06:00
# Copyright 2012 The Rust Project Developers. See the COPYRIGHT
# file at the top-level directory of this distribution and at
# http://rust-lang.org/COPYRIGHT.
#
# Licensed under the Apache License, Version 2.0 <LICENSE-APACHE or
# http://www.apache.org/licenses/LICENSE-2.0> or the MIT license
# <LICENSE-MIT or http://opensource.org/licenses/MIT>, at your
# option. This file may not be copied, modified, or distributed
# except according to those terms.
Define rustc's host triple at compile time This way a cross-compiled rustc's answer to host_triple() is correct. The return value of host_triple() reflects the actual host triple that the compiler was build for, not the triple the compiler is being built on
2013-05-25 01:05:31 -05:00
# This is the compile-time target-triple for the compiler. For the compiler at
# runtime, this should be considered the host-triple. More explanation for why
# this exists can be found on issue #2400
mk: Rename CFG_COMPILER to CFG_COMPILER_HOST_TRIPLE Much clearer
2014-03-25 21:23:45 -05:00
export CFG_COMPILER_HOST_TRIPLE
Define rustc's host triple at compile time This way a cross-compiled rustc's answer to host_triple() is correct. The return value of host_triple() reflects the actual host triple that the compiler was build for, not the triple the compiler is being built on
2013-05-25 01:05:31 -05:00
Deny common lints by default for lib{std,extra}
2013-06-25 19:02:03 -05:00
# The standard libraries should be held up to a higher standard than any old
# code, make sure that these common warnings are denied by default. These can
Allow stage0 warnings
2013-10-16 13:27:24 -05:00
# be overridden during development temporarily. For stage0, we allow warnings
# which may be bugs in stage0 (should be fixed in stage1+)
rustc: Default to static linking dylibs If a dylib is being produced, the compiler will now first check to see if it can be created entirely statically before falling back to dynamic dependencies. This behavior can be overridden with `-C prefer-dynamic`. Due to the alteration in behavior, this is a breaking change. Any previous users relying on dylibs implicitly maximizing dynamic dependencies should start passing `-C prefer-dynamic` to compilations. Closes #18499 [breaking-change]
2014-11-03 01:02:53 -06:00
RUST_LIB_FLAGS_ST0 += -W warnings
RUST_LIB_FLAGS_ST1 += -D warnings
RUST_LIB_FLAGS_ST2 += -D warnings
Deny common lints by default for lib{std,extra}
2013-06-25 19:02:03 -05:00
Refactor the build system for easily adding crates Before this patch, if you wanted to add a crate to the build system you had to change about 100 lines across 8 separate makefiles. This is highly error prone and opaque to all but a few. This refactoring is targeted at consolidating this effort so adding a new crate adds one line in one file in a way that everyone can understand it.
2014-01-24 21:27:22 -06:00
# Macro that generates the full list of dependencies for a crate at a particular
# stage/target/host tuple.
#
# $(1) - stage
# $(2) - target
# $(3) - host
# $(4) crate
define RUST_CRATE_FULLDEPS
mk: Remove extra whitespace before line continuation backslashes
2014-07-22 23:37:05 -05:00
CRATE_FULLDEPS_$(1)_T_$(2)_H_$(3)_$(4) := \
$$(CRATEFILE_$(4)) \
$$(RSINPUTS_$(4)) \
$$(foreach dep,$$(RUST_DEPS_$(4)), \
$$(TLIB$(1)_T_$(2)_H_$(3))/stamp.$$(dep)) \
$$(foreach dep,$$(NATIVE_DEPS_$(4)), \
Refactor the build system for easily adding crates Before this patch, if you wanted to add a crate to the build system you had to change about 100 lines across 8 separate makefiles. This is highly error prone and opaque to all but a few. This refactoring is targeted at consolidating this effort so adding a new crate adds one line in one file in a way that everyone can understand it.
2014-01-24 21:27:22 -06:00
$$(RT_OUTPUT_DIR_$(2))/$$(call CFG_STATIC_LIB_NAME_$(2),$$(dep)))
endef
mk: Remove extra whitespace before line continuation backslashes
2014-07-22 23:37:05 -05:00
$(foreach host,$(CFG_HOST), \
$(foreach target,$(CFG_TARGET), \
$(foreach stage,$(STAGES), \
$(foreach crate,$(CRATES), \
Refactor the build system for easily adding crates Before this patch, if you wanted to add a crate to the build system you had to change about 100 lines across 8 separate makefiles. This is highly error prone and opaque to all but a few. This refactoring is targeted at consolidating this effort so adding a new crate adds one line in one file in a way that everyone can understand it.
2014-01-24 21:27:22 -06:00
$(eval $(call RUST_CRATE_FULLDEPS,$(stage),$(target),$(host),$(crate)))))))
# RUST_TARGET_STAGE_N template: This defines how target artifacts are built
# for all stage/target architecture combinations. This is one giant rule which
# works as follows:
#
# 1. The immediate dependencies are the rust source files
# 2. Each rust crate dependency is listed (based on their stamp files),
# as well as all native dependencies (listed in RT_OUTPUT_DIR)
# 3. The stage (n-1) compiler is required through the TSREQ dependency, along
# with the morestack library
# 4. When actually executing the rule, the first thing we do is to clean out
# old libs and rlibs via the REMOVE_ALL_OLD_GLOB_MATCHES macro
# 5. Finally, we get around to building the actual crate. It's just one
# "small" invocation of the previous stage rustc. We use -L to
# RT_OUTPUT_DIR so all the native dependencies are picked up.
# Additionally, we pass in the llvm dir so rustc can link against it.
# 6. Some cleanup is done (listing what was just built) if verbose is turned
# on.
#
basic builds function
2011-11-21 15:11:40 -06:00
# $(1) is the stage
# $(2) is the target triple
# $(3) is the host triple
Refactor the build system for easily adding crates Before this patch, if you wanted to add a crate to the build system you had to change about 100 lines across 8 separate makefiles. This is highly error prone and opaque to all but a few. This refactoring is targeted at consolidating this effort so adding a new crate adds one line in one file in a way that everyone can understand it.
2014-01-24 21:27:22 -06:00
# $(4) is the crate name
define RUST_TARGET_STAGE_N
mk: Rename CFG_COMPILER to CFG_COMPILER_HOST_TRIPLE Much clearer
2014-03-25 21:23:45 -05:00
$$(TLIB$(1)_T_$(2)_H_$(3))/stamp.$(4): CFG_COMPILER_HOST_TRIPLE = $(2)
mk: Remove extra whitespace before line continuation backslashes
2014-07-22 23:37:05 -05:00
$$(TLIB$(1)_T_$(2)_H_$(3))/stamp.$(4): \
$$(CRATEFILE_$(4)) \
$$(CRATE_FULLDEPS_$(1)_T_$(2)_H_$(3)_$(4)) \
Fix the Linux nightly build by adding a LLVM_CONFIG_<target-triple> dep. The RUST_TARGET_STAGE_N rule uses LLVM_LIBDIR_RUSTFLAGS_<target-triple>, which expands to -L "$(llvm-config --libdir)" when the target-triple is also a host-triple. Rather than expand to -L "" if llvm-config has not yet been built, add a dependency on the target llvm-config. When the target-triple is not a host-triple, the new LLVM_CONFIG_$(2) dependency should expand to nothing.
2015-03-16 23:13:36 -05:00
$$(LLVM_CONFIG_$(2)) \
mk: Remove extra whitespace before line continuation backslashes
2014-07-22 23:37:05 -05:00
$$(TSREQ$(1)_T_$(2)_H_$(3)) \
Refactor the build system for easily adding crates Before this patch, if you wanted to add a crate to the build system you had to change about 100 lines across 8 separate makefiles. This is highly error prone and opaque to all but a few. This refactoring is targeted at consolidating this effort so adding a new crate adds one line in one file in a way that everyone can understand it.
2014-01-24 21:27:22 -06:00
| $$(TLIB$(1)_T_$(2)_H_$(3))/
mk: Replace 'oxidize' with 'rustc'. Closes #13781
2014-05-21 00:14:38 -05:00
@$$(call E, rustc: $$(@D)/lib$(4))
Make build timestamp files robust in face of concurrent source modification. Strategy: If the end goal is to touch e.g. `stamp.std`, then we first touch `stamp.std.start_time` before doing anything else. Then when the receipe finishes, we touch `stamp.std` using the timestamp from `stamp.std.start_time` as the reference time, and remove `stamp.std.start_time`. Fix #6518.
2015-03-03 08:11:01 -06:00
@touch $$@.start_time
mk: Add space before line continuation backslash
2014-07-22 23:45:08 -05:00
$$(call REMOVE_ALL_OLD_GLOB_MATCHES, \
Refactor the build system for easily adding crates Before this patch, if you wanted to add a crate to the build system you had to change about 100 lines across 8 separate makefiles. This is highly error prone and opaque to all but a few. This refactoring is targeted at consolidating this effort so adding a new crate adds one line in one file in a way that everyone can understand it.
2014-01-24 21:27:22 -06:00
$$(dir $$@)$$(call CFG_LIB_GLOB_$(2),$(4)))
mk: Add space before line continuation backslash
2014-07-22 23:45:08 -05:00
$$(call REMOVE_ALL_OLD_GLOB_MATCHES, \
Refactor the build system for easily adding crates Before this patch, if you wanted to add a crate to the build system you had to change about 100 lines across 8 separate makefiles. This is highly error prone and opaque to all but a few. This refactoring is targeted at consolidating this effort so adding a new crate adds one line in one file in a way that everyone can understand it.
2014-01-24 21:27:22 -06:00
$$(dir $$@)$$(call CFG_RLIB_GLOB,$(4)))
mk: Use host llvm linkage paths, not target ones We only build LLVM for the host architecture, not the target architecture, so this was just a minor typo in the parameters uses. Closes #19383
2014-11-30 02:01:19 -06:00
$(Q)CFG_LLVM_LINKAGE_FILE=$$(LLVM_LINKAGE_PATH_$(3)) \
Don't use the same llvmdeps.rs for every host.
2014-11-25 17:28:49 -06:00
$$(subst @,,$$(STAGE$(1)_T_$(2)_H_$(3))) \
rustc: Default to static linking dylibs If a dylib is being produced, the compiler will now first check to see if it can be created entirely statically before falling back to dynamic dependencies. This behavior can be overridden with `-C prefer-dynamic`. Due to the alteration in behavior, this is a breaking change. Any previous users relying on dylibs implicitly maximizing dynamic dependencies should start passing `-C prefer-dynamic` to compilations. Closes #18499 [breaking-change]
2014-11-03 01:02:53 -06:00
$$(RUST_LIB_FLAGS_ST$(1)) \
Refactor the build system for easily adding crates Before this patch, if you wanted to add a crate to the build system you had to change about 100 lines across 8 separate makefiles. This is highly error prone and opaque to all but a few. This refactoring is targeted at consolidating this effort so adding a new crate adds one line in one file in a way that everyone can understand it.
2014-01-24 21:27:22 -06:00
-L "$$(RT_OUTPUT_DIR_$(2))" \
Avoid passing -L "" during cross-compilation. LLVM_LIBDIR_<triple> is only defined for host triples, not target triples. FWIW, the same is true for LLVM_STDCPP_RUSTFLAGS_<triple>, where we explicitly define it as empty when --enable-llvm-static-stdcpp is not specified, but it's still undefined for cross-compiled triples.
2015-03-12 21:24:59 -05:00
$$(LLVM_LIBDIR_RUSTFLAGS_$(2)) \
Avoid passing -L "" to rustc. Currently, target.mk passes -L "" when LLVM_STDCPP_LOCATION_$(2) is empty. This fixes #23287.
2015-03-12 06:09:12 -05:00
$$(LLVM_STDCPP_RUSTFLAGS_$(2)) \
alloc: Allow disabling jemalloc
2014-06-14 01:23:31 -05:00
$$(RUSTFLAGS_$(4)) \
rustc: Stop putting hashes in filenames by default The compiler will no longer insert a hash or version into a filename by default. Instead, all output is simply based off the crate name being compiled. For example, a crate name of `foo` would produce the following outputs: * bin => foo * rlib => libfoo.rlib * dylib => libfoo.{so,dylib} or foo.dll * staticlib => libfoo.a The old behavior has been moved behind a new codegen flag, `-C extra-filename=<hash>`. For example, with the "extra filename" of `bar` and a crate name of `foo`, the following outputs would be generated: * bin => foo (same old behavior) * rlib => libfoobar.rlib * dylib => libfoobar.{so,dylib} or foobar.dll * staticlib => libfoobar.a The makefiles have been altered to pass a hash by default to invocations of `rustc` so all installed rust libraries will have a hash in their filename. This is done because the standard libraries are intended to be installed into privileged directories such as /usr/local. Additionally, it involves very few build system changes! RFC: 0035-remove-crate-id [breaking-change]
2014-07-01 09:57:07 -05:00
--out-dir $$(@D) \
Register new snapshots Closes #15544
2014-07-09 12:57:01 -05:00
-C extra-filename=-$$(CFG_FILENAME_EXTRA) \
rustc: Stop putting hashes in filenames by default The compiler will no longer insert a hash or version into a filename by default. Instead, all output is simply based off the crate name being compiled. For example, a crate name of `foo` would produce the following outputs: * bin => foo * rlib => libfoo.rlib * dylib => libfoo.{so,dylib} or foo.dll * staticlib => libfoo.a The old behavior has been moved behind a new codegen flag, `-C extra-filename=<hash>`. For example, with the "extra filename" of `bar` and a crate name of `foo`, the following outputs would be generated: * bin => foo (same old behavior) * rlib => libfoobar.rlib * dylib => libfoobar.{so,dylib} or foobar.dll * staticlib => libfoobar.a The makefiles have been altered to pass a hash by default to invocations of `rustc` so all installed rust libraries will have a hash in their filename. This is done because the standard libraries are intended to be installed into privileged directories such as /usr/local. Additionally, it involves very few build system changes! RFC: 0035-remove-crate-id [breaking-change]
2014-07-01 09:57:07 -05:00
$$<
Make build timestamp files robust in face of concurrent source modification. Strategy: If the end goal is to touch e.g. `stamp.std`, then we first touch `stamp.std.start_time` before doing anything else. Then when the receipe finishes, we touch `stamp.std` using the timestamp from `stamp.std.start_time` as the reference time, and remove `stamp.std.start_time`. Fix #6518.
2015-03-03 08:11:01 -06:00
@touch -r $$@.start_time $$@ && rm $$@.start_time
mk: Add space before line continuation backslash
2014-07-22 23:45:08 -05:00
$$(call LIST_ALL_OLD_GLOB_MATCHES, \
Refactor the build system for easily adding crates Before this patch, if you wanted to add a crate to the build system you had to change about 100 lines across 8 separate makefiles. This is highly error prone and opaque to all but a few. This refactoring is targeted at consolidating this effort so adding a new crate adds one line in one file in a way that everyone can understand it.
2014-01-24 21:27:22 -06:00
$$(dir $$@)$$(call CFG_LIB_GLOB_$(2),$(4)))
mk: Add space before line continuation backslash
2014-07-22 23:45:08 -05:00
$$(call LIST_ALL_OLD_GLOB_MATCHES, \
Refactor the build system for easily adding crates Before this patch, if you wanted to add a crate to the build system you had to change about 100 lines across 8 separate makefiles. This is highly error prone and opaque to all but a few. This refactoring is targeted at consolidating this effort so adding a new crate adds one line in one file in a way that everyone can understand it.
2014-01-24 21:27:22 -06:00
$$(dir $$@)$$(call CFG_RLIB_GLOB,$(4)))
endef
# Macro for building any tool as part of the rust compilation process. Each
# tool is defined in crates.mk with a list of library dependencies as well as
# the source file for the tool. Building each tool will also be passed '--cfg
# <tool>' for usage in driver.rs
#
# This build rule is similar to the one found above, just tweaked for
# locations and things.
#
# $(1) - stage
# $(2) - target triple
# $(3) - host triple
# $(4) - name of the tool being built
define TARGET_TOOL
mk: Remove extra whitespace before line continuation backslashes
2014-07-22 23:37:05 -05:00
$$(TBIN$(1)_T_$(2)_H_$(3))/$(4)$$(X_$(2)): \
$$(TOOL_SOURCE_$(4)) \
$$(TOOL_INPUTS_$(4)) \
$$(foreach dep,$$(TOOL_DEPS_$(4)), \
$$(TLIB$(1)_T_$(2)_H_$(3))/stamp.$$(dep)) \
$$(TSREQ$(1)_T_$(2)_H_$(3)) \
mk/target: fix typo so we depend on the correct directory Without this, if we we're using a non-standard host libdir, the target bindir would not exist (and rustc would fail to write to the non-existent directory).
2014-11-18 15:32:03 -06:00
| $$(TBIN$(1)_T_$(2)_H_$(3))/
mk: Replace 'oxidize' with 'rustc'. Closes #13781
2014-05-21 00:14:38 -05:00
@$$(call E, rustc: $$@)
Refactor the build system for easily adding crates Before this patch, if you wanted to add a crate to the build system you had to change about 100 lines across 8 separate makefiles. This is highly error prone and opaque to all but a few. This refactoring is targeted at consolidating this effort so adding a new crate adds one line in one file in a way that everyone can understand it.
2014-01-24 21:27:22 -06:00
$$(STAGE$(1)_T_$(2)_H_$(3)) -o $$@ $$< --cfg $(4)
endef
Lots of build system cleanup and documentation This splits mk/stageN.mk into host.mk and target.mk and makes the build rules somewhat simpler - there's no more building from stageN into stageN+1; instead we always build from stageN(host) to stageN(target) then promote from stageN(target) to stageN+1(host). Add a big honkin explaination right at the top of Makefile.in
2011-10-01 22:12:08 -05:00
Refactor the build system for easily adding crates Before this patch, if you wanted to add a crate to the build system you had to change about 100 lines across 8 separate makefiles. This is highly error prone and opaque to all but a few. This refactoring is targeted at consolidating this effort so adding a new crate adds one line in one file in a way that everyone can understand it.
2014-01-24 21:27:22 -06:00
# Every recipe in RUST_TARGET_STAGE_N outputs to $$(TLIB$(1)_T_$(2)_H_$(3),
small cleanup of previous commit with mucho comments.
2013-08-31 17:53:56 -05:00
# a directory that can be cleaned out during the middle of a run of
# the get-snapshot.py script. Therefore, every recipe needs to have
# an order-only dependency either on $(SNAPSHOT_RUSTC_POST_CLEANUP) or
# on $$(TSREQ$(1)_T_$(2)_H_$(3)), to ensure that no products will be
# put into the target area until after the get-snapshot.py script has
# had its chance to clean it out; otherwise the other products will be
Fix some typos
2015-03-28 10:09:51 -05:00
# inadvertently included in the clean out.
support for GNU configure syntax
2013-10-21 04:18:21 -05:00
SNAPSHOT_RUSTC_POST_CLEANUP=$(HBIN0_H_$(CFG_BUILD))/rustc$(X_$(CFG_BUILD))
Fix for make -j race from #9531 injected by cleanup in b1a22518f0c687db.
2013-09-26 16:56:53 -05:00
Refactor the build system for easily adding crates Before this patch, if you wanted to add a crate to the build system you had to change about 100 lines across 8 separate makefiles. This is highly error prone and opaque to all but a few. This refactoring is targeted at consolidating this effort so adding a new crate adds one line in one file in a way that everyone can understand it.
2014-01-24 21:27:22 -06:00
define TARGET_HOST_RULES
rt: Build __morestack as a static library and copy it to the right places
2011-11-28 19:23:13 -06:00
Fix another goof: consistently use parent directory of target for rule. (I wonder if there's a better way to write this in the rule itself; i.e. something like `$$(dirname $$@)`. But for now this will do.)
2013-05-04 05:46:11 -05:00
$$(TBIN$(1)_T_$(2)_H_$(3))/:
mkdir -p $$@
Make build products depend on their target directories. This is an attempt to address Issue #3326 by adding [*order-only*][1] prerequsites of each build product on the directory where it is to go. It is important that the prerequisites be order-only, since the timestamp on a parent directory is not relevant to whether a product is out of date; the parent directory merely needs to exist. (This use case of generating target directories was provided as an [example][2] of how order-only prequisites are used.) [1]: http://www.gnu.org/software/make/manual/html_node/Prerequisite-Types.html [2]: http://www.kolpackov.net/pipermail/notes/2004-January/000001.html
2013-05-03 11:53:47 -05:00
$$(TLIB$(1)_T_$(2)_H_$(3))/:
Fix syntax: had to use escaped $$ to have an effect after first expansion.
2013-05-04 03:57:56 -05:00
mkdir -p $$@
Make build products depend on their target directories. This is an attempt to address Issue #3326 by adding [*order-only*][1] prerequsites of each build product on the directory where it is to go. It is important that the prerequisites be order-only, since the timestamp on a parent directory is not relevant to whether a product is out of date; the parent directory merely needs to exist. (This use case of generating target directories was provided as an [example][2] of how order-only prequisites are used.) [1]: http://www.gnu.org/software/make/manual/html_node/Prerequisite-Types.html [2]: http://www.kolpackov.net/pipermail/notes/2004-January/000001.html
2013-05-03 11:53:47 -05:00
Build compiler-rt and link it to all crates, similarly to morestack.
2014-02-04 00:54:09 -06:00
$$(TLIB$(1)_T_$(2)_H_$(3))/libcompiler-rt.a: \
$$(RT_OUTPUT_DIR_$(2))/$$(call CFG_STATIC_LIB_NAME_$(2),compiler-rt) \
| $$(TLIB$(1)_T_$(2)_H_$(3))/ $$(SNAPSHOT_RUSTC_POST_CLEANUP)
@$$(call E, cp: $$@)
$$(Q)cp $$< $$@
Refactor the build system for easily adding crates Before this patch, if you wanted to add a crate to the build system you had to change about 100 lines across 8 separate makefiles. This is highly error prone and opaque to all but a few. This refactoring is targeted at consolidating this effort so adding a new crate adds one line in one file in a way that everyone can understand it.
2014-01-24 21:27:22 -06:00
$$(TLIB$(1)_T_$(2)_H_$(3))/libmorestack.a: \
$$(RT_OUTPUT_DIR_$(2))/$$(call CFG_STATIC_LIB_NAME_$(2),morestack) \
| $$(TLIB$(1)_T_$(2)_H_$(3))/ $$(SNAPSHOT_RUSTC_POST_CLEANUP)
@$$(call E, cp: $$@)
$$(Q)cp $$< $$@
build: Add USE_SNAPSHOT_STDLIB. Set to 1
2012-05-22 13:40:46 -05:00
endef
mk: Remove extra whitespace before line continuation backslashes
2014-07-22 23:37:05 -05:00
$(foreach source,$(CFG_HOST), \
$(foreach target,$(CFG_TARGET), \
$(eval $(call TARGET_HOST_RULES,0,$(target),$(source))) \
$(eval $(call TARGET_HOST_RULES,1,$(target),$(source))) \
$(eval $(call TARGET_HOST_RULES,2,$(target),$(source))) \
Refactor the build system for easily adding crates Before this patch, if you wanted to add a crate to the build system you had to change about 100 lines across 8 separate makefiles. This is highly error prone and opaque to all but a few. This refactoring is targeted at consolidating this effort so adding a new crate adds one line in one file in a way that everyone can understand it.
2014-01-24 21:27:22 -06:00
$(eval $(call TARGET_HOST_RULES,3,$(target),$(source)))))
# In principle, each host can build each target for both libs and tools
mk: Remove extra whitespace before line continuation backslashes
2014-07-22 23:37:05 -05:00
$(foreach crate,$(CRATES), \
$(foreach source,$(CFG_HOST), \
$(foreach target,$(CFG_TARGET), \
$(eval $(call RUST_TARGET_STAGE_N,0,$(target),$(source),$(crate))) \
$(eval $(call RUST_TARGET_STAGE_N,1,$(target),$(source),$(crate))) \
$(eval $(call RUST_TARGET_STAGE_N,2,$(target),$(source),$(crate))) \
Refactor the build system for easily adding crates Before this patch, if you wanted to add a crate to the build system you had to change about 100 lines across 8 separate makefiles. This is highly error prone and opaque to all but a few. This refactoring is targeted at consolidating this effort so adding a new crate adds one line in one file in a way that everyone can understand it.
2014-01-24 21:27:22 -06:00
$(eval $(call RUST_TARGET_STAGE_N,3,$(target),$(source),$(crate))))))
mk: Remove extra whitespace before line continuation backslashes
2014-07-22 23:37:05 -05:00
$(foreach host,$(CFG_HOST), \
$(foreach target,$(CFG_TARGET), \
$(foreach stage,$(STAGES), \
$(foreach tool,$(TOOLS), \
Refactor the build system for easily adding crates Before this patch, if you wanted to add a crate to the build system you had to change about 100 lines across 8 separate makefiles. This is highly error prone and opaque to all but a few. This refactoring is targeted at consolidating this effort so adding a new crate adds one line in one file in a way that everyone can understand it.
2014-01-24 21:27:22 -06:00
$(eval $(call TARGET_TOOL,$(stage),$(target),$(host),$(tool)))))))
Reference in New Issue Copy Permalink