rust/clippy_utils/src/diagnostics.rs

//! Clippy wrappers around rustc's diagnostic functions.
//!
//! These functions are used by the `INTERNAL_METADATA_COLLECTOR` lint to collect the corresponding
//! lint applicability. Please make sure that you update the `LINT_EMISSION_FUNCTIONS` variable in
//! `clippy_lints::utils::internal_lints::metadata_collector` when a new function is added
//! or renamed.
//!
//! Thank you!
//! ~The `INTERNAL_METADATA_COLLECTOR` lint

use rustc_errors::{Applicability, Diag, DiagMessage, MultiSpan, SubdiagMessage};
use rustc_hir::HirId;
use rustc_lint::{LateContext, Lint, LintContext};
use rustc_span::Span;
use std::env;

fn docs_link(diag: &mut Diag<'_, ()>, lint: &'static Lint) {
    if env::var("CLIPPY_DISABLE_DOCS_LINKS").is_err() {
        if let Some(lint) = lint.name_lower().strip_prefix("clippy::") {
            diag.help(format!(
                "for further information visit https://rust-lang.github.io/rust-clippy/{}/index.html#{lint}",
                &option_env!("RUST_RELEASE_NUM").map_or("master".to_string(), |n| {
                    // extract just major + minor version and ignore patch versions
                    format!("rust-{}", n.rsplit_once('.').unwrap().1)
                })
            ));
        }
    }
}

/// Emit a basic lint message with a `msg` and a `span`.
///
/// This is the most primitive of our lint emission methods and can
/// be a good way to get a new lint started.
///
/// Usually it's nicer to provide more context for lint messages.
/// Be sure the output is understandable when you use this method.
///
/// NOTE: Lint emissions are always bound to a node in the HIR, which is used to determine
/// the lint level.
/// For the `span_lint` function, the node that was passed into the `LintPass::check_*` function is
/// used.
///
/// If you're emitting the lint at the span of a different node than the one provided by the
/// `LintPass::check_*` function, consider using [`span_lint_hir`] instead.
/// This is needed for `#[allow]` and `#[expect]` attributes to work on the node
/// highlighted in the displayed warning.
///
/// If you're unsure which function you should use, you can test if the `#[allow]` attribute works
/// where you would expect it to.
/// If it doesn't, you likely need to use [`span_lint_hir`] instead.
///
/// # Example
///
/// ```ignore
/// error: usage of mem::forget on Drop type
///   --> tests/ui/mem_forget.rs:17:5
///    |
/// 17 |     std::mem::forget(seven);
///    |     ^^^^^^^^^^^^^^^^^^^^^^^
/// ```
pub fn span_lint<T: LintContext>(cx: &T, lint: &'static Lint, sp: impl Into<MultiSpan>, msg: impl Into<DiagMessage>) {
    #[expect(clippy::disallowed_methods)]
    cx.span_lint(lint, sp, msg.into(), |diag| {
        docs_link(diag, lint);
    });
}

/// Same as `span_lint` but with an extra `help` message.
///
/// Use this if you want to provide some general help but
/// can't provide a specific machine applicable suggestion.
///
/// The `help` message can be optionally attached to a `Span`.
///
/// If you change the signature, remember to update the internal lint `CollapsibleCalls`
///
/// NOTE: Lint emissions are always bound to a node in the HIR, which is used to determine
/// the lint level.
/// For the `span_lint_and_help` function, the node that was passed into the `LintPass::check_*`
/// function is used.
///
/// If you're emitting the lint at the span of a different node than the one provided by the
/// `LintPass::check_*` function, consider using [`span_lint_hir_and_then`] instead.
/// This is needed for `#[allow]` and `#[expect]` attributes to work on the node
/// highlighted in the displayed warning.
///
/// If you're unsure which function you should use, you can test if the `#[allow]` attribute works
/// where you would expect it to.
/// If it doesn't, you likely need to use [`span_lint_hir_and_then`] instead.
///
/// # Example
///
/// ```text
/// error: constant division of 0.0 with 0.0 will always result in NaN
///   --> tests/ui/zero_div_zero.rs:6:25
///    |
/// 6  |     let other_f64_nan = 0.0f64 / 0.0;
///    |                         ^^^^^^^^^^^^
///    |
///    = help: consider using `f64::NAN` if you would like a constant representing NaN
/// ```
pub fn span_lint_and_help<T: LintContext>(
    cx: &T,
    lint: &'static Lint,
    span: impl Into<MultiSpan>,
    msg: impl Into<DiagMessage>,
    help_span: Option<Span>,
    help: impl Into<SubdiagMessage>,
) {
    #[expect(clippy::disallowed_methods)]
    cx.span_lint(lint, span, msg.into(), |diag| {
        if let Some(help_span) = help_span {
            diag.span_help(help_span, help.into());
        } else {
            diag.help(help.into());
        }
        docs_link(diag, lint);
    });
}

/// Like `span_lint` but with a `note` section instead of a `help` message.
///
/// The `note` message is presented separately from the main lint message
/// and is attached to a specific span:
///
/// If you change the signature, remember to update the internal lint `CollapsibleCalls`
///
/// NOTE: Lint emissions are always bound to a node in the HIR, which is used to determine
/// the lint level.
/// For the `span_lint_and_note` function, the node that was passed into the `LintPass::check_*`
/// function is used.
///
/// If you're emitting the lint at the span of a different node than the one provided by the
/// `LintPass::check_*` function, consider using [`span_lint_hir_and_then`] instead.
/// This is needed for `#[allow]` and `#[expect]` attributes to work on the node
/// highlighted in the displayed warning.
///
/// If you're unsure which function you should use, you can test if the `#[allow]` attribute works
/// where you would expect it to.
/// If it doesn't, you likely need to use [`span_lint_hir_and_then`] instead.
///
/// # Example
///
/// ```text
/// error: calls to `std::mem::forget` with a reference instead of an owned value. Forgetting a reference does nothing.
///   --> tests/ui/drop_forget_ref.rs:10:5
///    |
/// 10 |     forget(&SomeStruct);
///    |     ^^^^^^^^^^^^^^^^^^^
///    |
///    = note: `-D clippy::forget-ref` implied by `-D warnings`
/// note: argument has type &SomeStruct
///   --> tests/ui/drop_forget_ref.rs:10:12
///    |
/// 10 |     forget(&SomeStruct);
///    |            ^^^^^^^^^^^
/// ```
pub fn span_lint_and_note<T: LintContext>(
    cx: &T,
    lint: &'static Lint,
    span: impl Into<MultiSpan>,
    msg: impl Into<DiagMessage>,
    note_span: Option<Span>,
    note: impl Into<SubdiagMessage>,
) {
    #[expect(clippy::disallowed_methods)]
    cx.span_lint(lint, span, msg.into(), |diag| {
        if let Some(note_span) = note_span {
            diag.span_note(note_span, note.into());
        } else {
            diag.note(note.into());
        }
        docs_link(diag, lint);
    });
}

/// Like `span_lint` but allows to add notes, help and suggestions using a closure.
///
/// If you need to customize your lint output a lot, use this function.
/// If you change the signature, remember to update the internal lint `CollapsibleCalls`
///
/// NOTE: Lint emissions are always bound to a node in the HIR, which is used to determine
/// the lint level.
/// For the `span_lint_and_then` function, the node that was passed into the `LintPass::check_*`
/// function is used.
///
/// If you're emitting the lint at the span of a different node than the one provided by the
/// `LintPass::check_*` function, consider using [`span_lint_hir_and_then`] instead.
/// This is needed for `#[allow]` and `#[expect]` attributes to work on the node
/// highlighted in the displayed warning.
///
/// If you're unsure which function you should use, you can test if the `#[allow]` attribute works
/// where you would expect it to.
/// If it doesn't, you likely need to use [`span_lint_hir_and_then`] instead.
pub fn span_lint_and_then<C, S, M, F>(cx: &C, lint: &'static Lint, sp: S, msg: M, f: F)
where
    C: LintContext,
    S: Into<MultiSpan>,
    M: Into<DiagMessage>,
    F: FnOnce(&mut Diag<'_, ()>),
{
    #[expect(clippy::disallowed_methods)]
    cx.span_lint(lint, sp, msg, |diag| {
        f(diag);
        docs_link(diag, lint);
    });
}

/// Like [`span_lint`], but emits the lint at the node identified by the given `HirId`.
///
/// This is in contrast to [`span_lint`], which always emits the lint at the node that was last
/// passed to the `LintPass::check_*` function.
///
/// The `HirId` is used for checking lint level attributes and to fulfill lint expectations defined
/// via the `#[expect]` attribute.
///
/// For example:
/// ```ignore
/// fn f() { /* <node_1> */
///
///     #[allow(clippy::some_lint)]
///     let _x = /* <expr_1> */;
/// }
/// ```
/// If `some_lint` does its analysis in `LintPass::check_fn` (at `<node_1>`) and emits a lint at
/// `<expr_1>` using [`span_lint`], then allowing the lint at `<expr_1>` as attempted in the snippet
/// will not work!
/// Even though that is where the warning points at, which would be confusing to users.
///
/// Instead, use this function and also pass the `HirId` of `<expr_1>`, which will let
/// the compiler check lint level attributes at the place of the expression and
/// the `#[allow]` will work.
pub fn span_lint_hir(cx: &LateContext<'_>, lint: &'static Lint, hir_id: HirId, sp: Span, msg: impl Into<DiagMessage>) {
    #[expect(clippy::disallowed_methods)]
    cx.tcx.node_span_lint(lint, hir_id, sp, msg.into(), |diag| {
        docs_link(diag, lint);
    });
}

/// Like [`span_lint_and_then`], but emits the lint at the node identified by the given `HirId`.
///
/// This is in contrast to [`span_lint_and_then`], which always emits the lint at the node that was
/// last passed to the `LintPass::check_*` function.
///
/// The `HirId` is used for checking lint level attributes and to fulfill lint expectations defined
/// via the `#[expect]` attribute.
///
/// For example:
/// ```ignore
/// fn f() { /* <node_1> */
///
///     #[allow(clippy::some_lint)]
///     let _x = /* <expr_1> */;
/// }
/// ```
/// If `some_lint` does its analysis in `LintPass::check_fn` (at `<node_1>`) and emits a lint at
/// `<expr_1>` using [`span_lint`], then allowing the lint at `<expr_1>` as attempted in the snippet
/// will not work!
/// Even though that is where the warning points at, which would be confusing to users.
///
/// Instead, use this function and also pass the `HirId` of `<expr_1>`, which will let
/// the compiler check lint level attributes at the place of the expression and
/// the `#[allow]` will work.
pub fn span_lint_hir_and_then(
    cx: &LateContext<'_>,
    lint: &'static Lint,
    hir_id: HirId,
    sp: impl Into<MultiSpan>,
    msg: impl Into<DiagMessage>,
    f: impl FnOnce(&mut Diag<'_, ()>),
) {
    #[expect(clippy::disallowed_methods)]
    cx.tcx.node_span_lint(lint, hir_id, sp, msg.into(), |diag| {
        f(diag);
        docs_link(diag, lint);
    });
}

/// Add a span lint with a suggestion on how to fix it.
///
/// These suggestions can be parsed by rustfix to allow it to automatically fix your code.
/// In the example below, `help` is `"try"` and `sugg` is the suggested replacement `".any(|x| x >
/// 2)"`.
///
/// If you change the signature, remember to update the internal lint `CollapsibleCalls`
///
/// NOTE: Lint emissions are always bound to a node in the HIR, which is used to determine
/// the lint level.
/// For the `span_lint_and_sugg` function, the node that was passed into the `LintPass::check_*`
/// function is used.
///
/// If you're emitting the lint at the span of a different node than the one provided by the
/// `LintPass::check_*` function, consider using [`span_lint_hir_and_then`] instead.
/// This is needed for `#[allow]` and `#[expect]` attributes to work on the node
/// highlighted in the displayed warning.
///
/// If you're unsure which function you should use, you can test if the `#[allow]` attribute works
/// where you would expect it to.
/// If it doesn't, you likely need to use [`span_lint_hir_and_then`] instead.
///
/// # Example
///
/// ```text
/// error: This `.fold` can be more succinctly expressed as `.any`
/// --> tests/ui/methods.rs:390:13
///     |
/// 390 |     let _ = (0..3).fold(false, |acc, x| acc || x > 2);
///     |                   ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: try: `.any(|x| x > 2)`
///     |
///     = note: `-D fold-any` implied by `-D warnings`
/// ```
#[expect(clippy::collapsible_span_lint_calls)]
pub fn span_lint_and_sugg<T: LintContext>(
    cx: &T,
    lint: &'static Lint,
    sp: Span,
    msg: impl Into<DiagMessage>,
    help: impl Into<SubdiagMessage>,
    sugg: String,
    applicability: Applicability,
) {
    span_lint_and_then(cx, lint, sp, msg.into(), |diag| {
        diag.span_suggestion(sp, help.into(), sugg, applicability);
    });
}

/// Create a suggestion made from several `span → replacement`.
///
/// Note: in the JSON format (used by `compiletest_rs`), the help message will
/// appear once per
/// replacement. In human-readable format though, it only appears once before
/// the whole suggestion.
pub fn multispan_sugg<I>(diag: &mut Diag<'_, ()>, help_msg: impl Into<SubdiagMessage>, sugg: I)
where
    I: IntoIterator<Item = (Span, String)>,
{
    multispan_sugg_with_applicability(diag, help_msg, Applicability::Unspecified, sugg);
}

/// Create a suggestion made from several `span → replacement`.
///
/// rustfix currently doesn't support the automatic application of suggestions with
/// multiple spans. This is tracked in issue [rustfix#141](https://github.com/rust-lang/rustfix/issues/141).
/// Suggestions with multiple spans will be silently ignored.
pub fn multispan_sugg_with_applicability<I>(
    diag: &mut Diag<'_, ()>,
    help_msg: impl Into<SubdiagMessage>,
    applicability: Applicability,
    sugg: I,
) where
    I: IntoIterator<Item = (Span, String)>,
{
    diag.multipart_suggestion(help_msg.into(), sugg.into_iter().collect(), applicability);
}