rust/compiler/rustc_llvm/llvm-wrapper/PassWrapper.cpp

Ignoring revisions in .git-blame-ignore-revs. Click here to bypass and see the normal blame view.

1556 lines
52 KiB
C++
Raw Normal View History

2013-08-22 22:58:42 -05:00
#include <stdio.h>
#include <iomanip>
#include <vector>
#include <set>
2020-07-26 12:11:30 -05:00
#include "LLVMWrapper.h"
2020-11-03 15:47:16 -06:00
#include "llvm/Analysis/AliasAnalysis.h"
#include "llvm/Analysis/TargetLibraryInfo.h"
#include "llvm/Analysis/TargetTransformInfo.h"
#include "llvm/CodeGen/CommandFlags.h"
#include "llvm/CodeGen/TargetSubtargetInfo.h"
#include "llvm/IR/AutoUpgrade.h"
#include "llvm/IR/AssemblyAnnotationWriter.h"
#include "llvm/IR/IntrinsicInst.h"
#include "llvm/IR/Verifier.h"
2023-02-01 14:52:06 -06:00
#include "llvm/MC/TargetRegistry.h"
Store LLVM bitcode in object files, not compressed This commit is an attempted resurrection of #70458 where LLVM bitcode emitted by rustc into rlibs is stored into object file sections rather than in a separate file. The main rationale for doing this is that when rustc emits bitcode it will no longer use a custom compression scheme which makes it both easier to interoperate with existing tools and also cuts down on compile time since this compression isn't happening. The blocker for this in #70458 turned out to be that native linkers didn't handle the new sections well, causing the sections to either trigger bugs in the linker or actually end up in the final linked artifact. This commit attempts to address these issues by ensuring that native linkers ignore the new sections by inserting custom flags with module-level inline assembly. Note that this does not currently change the API of the compiler at all. The pre-existing `-C bitcode-in-rlib` flag is co-opted to indicate whether the bitcode should be present in the object file or not. Finally, note that an important consequence of this commit, which is also one of its primary purposes, is to enable rustc's `-Clto` bitcode loading to load rlibs produced with `-Clinker-plugin-lto`. The goal here is that when you're building with LTO Cargo will tell rustc to skip codegen of all intermediate crates and only generate LLVM IR. Today rustc will generate both object code and LLVM IR, but the object code is later simply thrown away, wastefully.
2020-04-23 13:45:55 -05:00
#include "llvm/Object/ObjectFile.h"
#include "llvm/Object/IRObjectFile.h"
#include "llvm/Passes/PassBuilder.h"
#include "llvm/Passes/PassPlugin.h"
#include "llvm/Passes/StandardInstrumentations.h"
#include "llvm/Support/CBindingWrapping.h"
#include "llvm/Support/FileSystem.h"
#if LLVM_VERSION_GE(17, 0)
#include "llvm/Support/VirtualFileSystem.h"
#endif
#include "llvm/Target/TargetMachine.h"
#include "llvm/Transforms/IPO/AlwaysInliner.h"
rustc: Implement ThinLTO This commit is an implementation of LLVM's ThinLTO for consumption in rustc itself. Currently today LTO works by merging all relevant LLVM modules into one and then running optimization passes. "Thin" LTO operates differently by having more sharded work and allowing parallelism opportunities between optimizing codegen units. Further down the road Thin LTO also allows *incremental* LTO which should enable even faster release builds without compromising on the performance we have today. This commit uses a `-Z thinlto` flag to gate whether ThinLTO is enabled. It then also implements two forms of ThinLTO: * In one mode we'll *only* perform ThinLTO over the codegen units produced in a single compilation. That is, we won't load upstream rlibs, but we'll instead just perform ThinLTO amongst all codegen units produced by the compiler for the local crate. This is intended to emulate a desired end point where we have codegen units turned on by default for all crates and ThinLTO allows us to do this without performance loss. * In anther mode, like full LTO today, we'll optimize all upstream dependencies in "thin" mode. Unlike today, however, this LTO step is fully parallelized so should finish much more quickly. There's a good bit of comments about what the implementation is doing and where it came from, but the tl;dr; is that currently most of the support here is copied from upstream LLVM. This code duplication is done for a number of reasons: * Controlling parallelism means we can use the existing jobserver support to avoid overloading machines. * We will likely want a slightly different form of incremental caching which integrates with our own incremental strategy, but this is yet to be determined. * This buys us some flexibility about when/where we run ThinLTO, as well as having it tailored to fit our needs for the time being. * Finally this allows us to reuse some artifacts such as our `TargetMachine` creation, where all our options we used today aren't necessarily supported by upstream LLVM yet. My hope is that we can get some experience with this copy/paste in tree and then eventually upstream some work to LLVM itself to avoid the duplication while still ensuring our needs are met. Otherwise I fear that maintaining these bindings may be quite costly over the years with LLVM updates!
2017-07-23 10:14:38 -05:00
#include "llvm/Transforms/IPO/FunctionImport.h"
#include "llvm/Transforms/IPO/Internalize.h"
#include "llvm/Transforms/IPO/LowerTypeTests.h"
#include "llvm/Transforms/IPO/ThinLTOBitcodeWriter.h"
#include "llvm/Transforms/Utils/AddDiscriminators.h"
rustc: Implement ThinLTO This commit is an implementation of LLVM's ThinLTO for consumption in rustc itself. Currently today LTO works by merging all relevant LLVM modules into one and then running optimization passes. "Thin" LTO operates differently by having more sharded work and allowing parallelism opportunities between optimizing codegen units. Further down the road Thin LTO also allows *incremental* LTO which should enable even faster release builds without compromising on the performance we have today. This commit uses a `-Z thinlto` flag to gate whether ThinLTO is enabled. It then also implements two forms of ThinLTO: * In one mode we'll *only* perform ThinLTO over the codegen units produced in a single compilation. That is, we won't load upstream rlibs, but we'll instead just perform ThinLTO amongst all codegen units produced by the compiler for the local crate. This is intended to emulate a desired end point where we have codegen units turned on by default for all crates and ThinLTO allows us to do this without performance loss. * In anther mode, like full LTO today, we'll optimize all upstream dependencies in "thin" mode. Unlike today, however, this LTO step is fully parallelized so should finish much more quickly. There's a good bit of comments about what the implementation is doing and where it came from, but the tl;dr; is that currently most of the support here is copied from upstream LLVM. This code duplication is done for a number of reasons: * Controlling parallelism means we can use the existing jobserver support to avoid overloading machines. * We will likely want a slightly different form of incremental caching which integrates with our own incremental strategy, but this is yet to be determined. * This buys us some flexibility about when/where we run ThinLTO, as well as having it tailored to fit our needs for the time being. * Finally this allows us to reuse some artifacts such as our `TargetMachine` creation, where all our options we used today aren't necessarily supported by upstream LLVM yet. My hope is that we can get some experience with this copy/paste in tree and then eventually upstream some work to LLVM itself to avoid the duplication while still ensuring our needs are met. Otherwise I fear that maintaining these bindings may be quite costly over the years with LLVM updates!
2017-07-23 10:14:38 -05:00
#include "llvm/Transforms/Utils/FunctionImportUtils.h"
#include "llvm/LTO/LTO.h"
#include "llvm/Bitcode/BitcodeWriter.h"
#include "llvm/Transforms/Instrumentation.h"
#include "llvm/Transforms/Instrumentation/AddressSanitizer.h"
#include "llvm/Support/TimeProfiler.h"
#include "llvm/Transforms/Instrumentation/GCOVProfiler.h"
#include "llvm/Transforms/Instrumentation/InstrProfiling.h"
#include "llvm/Transforms/Instrumentation/ThreadSanitizer.h"
#include "llvm/Transforms/Instrumentation/MemorySanitizer.h"
2021-01-22 20:32:38 -06:00
#include "llvm/Transforms/Instrumentation/HWAddressSanitizer.h"
#include "llvm/Transforms/Utils/CanonicalizeAliases.h"
#include "llvm/Transforms/Utils/NameAnonGlobals.h"
#include "llvm/Transforms/Utils.h"
2013-08-22 22:58:42 -05:00
using namespace llvm;
static codegen::RegisterCodeGenFlags CGF;
2013-08-22 22:58:42 -05:00
typedef struct LLVMOpaquePass *LLVMPassRef;
typedef struct LLVMOpaqueTargetMachine *LLVMTargetMachineRef;
DEFINE_STDCXX_CONVERSION_FUNCTIONS(Pass, LLVMPassRef)
DEFINE_STDCXX_CONVERSION_FUNCTIONS(TargetMachine, LLVMTargetMachineRef)
extern "C" void LLVMTimeTraceProfilerInitialize() {
timeTraceProfilerInitialize(
/* TimeTraceGranularity */ 0,
/* ProcName */ "rustc");
}
extern "C" void LLVMTimeTraceProfilerFinishThread() {
timeTraceProfilerFinishThread();
}
extern "C" void LLVMTimeTraceProfilerFinish(const char* FileName) {
StringRef FN(FileName);
std::error_code EC;
raw_fd_ostream OS(FN, EC, sys::fs::CD_CreateAlways);
timeTraceProfilerWrite(OS);
timeTraceProfilerCleanup();
}
#ifdef LLVM_COMPONENT_X86
#define SUBTARGET_X86 SUBTARGET(X86)
#else
#define SUBTARGET_X86
#endif
#ifdef LLVM_COMPONENT_ARM
#define SUBTARGET_ARM SUBTARGET(ARM)
#else
#define SUBTARGET_ARM
#endif
#ifdef LLVM_COMPONENT_AARCH64
#define SUBTARGET_AARCH64 SUBTARGET(AArch64)
#else
#define SUBTARGET_AARCH64
#endif
2016-05-06 08:32:10 -05:00
#ifdef LLVM_COMPONENT_AVR
#define SUBTARGET_AVR SUBTARGET(AVR)
#else
#define SUBTARGET_AVR
#endif
#ifdef LLVM_COMPONENT_M68k
#define SUBTARGET_M68K SUBTARGET(M68k)
#else
#define SUBTARGET_M68K
#endif
#ifdef LLVM_COMPONENT_CSKY
#define SUBTARGET_CSKY SUBTARGET(CSKY)
#else
#define SUBTARGET_CSKY
#endif
#ifdef LLVM_COMPONENT_MIPS
#define SUBTARGET_MIPS SUBTARGET(Mips)
#else
#define SUBTARGET_MIPS
#endif
#ifdef LLVM_COMPONENT_POWERPC
#define SUBTARGET_PPC SUBTARGET(PPC)
#else
#define SUBTARGET_PPC
#endif
#ifdef LLVM_COMPONENT_SYSTEMZ
#define SUBTARGET_SYSTEMZ SUBTARGET(SystemZ)
#else
#define SUBTARGET_SYSTEMZ
#endif
#ifdef LLVM_COMPONENT_MSP430
#define SUBTARGET_MSP430 SUBTARGET(MSP430)
#else
#define SUBTARGET_MSP430
#endif
2018-07-24 05:03:28 -05:00
#ifdef LLVM_COMPONENT_RISCV
#define SUBTARGET_RISCV SUBTARGET(RISCV)
#else
#define SUBTARGET_RISCV
#endif
2016-12-03 10:53:31 -06:00
#ifdef LLVM_COMPONENT_SPARC
#define SUBTARGET_SPARC SUBTARGET(Sparc)
#else
#define SUBTARGET_SPARC
#endif
#ifdef LLVM_COMPONENT_HEXAGON
#define SUBTARGET_HEXAGON SUBTARGET(Hexagon)
#else
#define SUBTARGET_HEXAGON
#endif
2022-07-07 02:46:10 -05:00
#ifdef LLVM_COMPONENT_LOONGARCH
#define SUBTARGET_LOONGARCH SUBTARGET(LoongArch)
#else
#define SUBTARGET_LOONGARCH
#endif
#define GEN_SUBTARGETS \
SUBTARGET_X86 \
SUBTARGET_ARM \
SUBTARGET_AARCH64 \
2016-05-06 08:32:10 -05:00
SUBTARGET_AVR \
SUBTARGET_M68K \
SUBTARGET_CSKY \
SUBTARGET_MIPS \
SUBTARGET_PPC \
SUBTARGET_SYSTEMZ \
2016-12-31 21:40:10 -06:00
SUBTARGET_MSP430 \
SUBTARGET_SPARC \
2018-07-24 05:03:28 -05:00
SUBTARGET_HEXAGON \
SUBTARGET_RISCV \
2022-07-07 02:46:10 -05:00
SUBTARGET_LOONGARCH \
#define SUBTARGET(x) \
namespace llvm { \
extern const SubtargetFeatureKV x##FeatureKV[]; \
extern const SubtargetFeatureKV x##SubTypeKV[]; \
}
GEN_SUBTARGETS
#undef SUBTARGET
extern "C" bool LLVMRustHasFeature(LLVMTargetMachineRef TM,
const char *Feature) {
TargetMachine *Target = unwrap(TM);
const MCSubtargetInfo *MCInfo = Target->getMCSubtargetInfo();
return MCInfo->checkFeatures(std::string("+") + Feature);
}
enum class LLVMRustCodeModel {
Tiny,
Small,
Kernel,
Medium,
Large,
None,
};
#if LLVM_VERSION_LT(16, 0)
static Optional<CodeModel::Model>
#else
static std::optional<CodeModel::Model>
#endif
fromRust(LLVMRustCodeModel Model) {
switch (Model) {
case LLVMRustCodeModel::Tiny:
return CodeModel::Tiny;
case LLVMRustCodeModel::Small:
return CodeModel::Small;
case LLVMRustCodeModel::Kernel:
return CodeModel::Kernel;
case LLVMRustCodeModel::Medium:
return CodeModel::Medium;
case LLVMRustCodeModel::Large:
return CodeModel::Large;
case LLVMRustCodeModel::None:
#if LLVM_VERSION_LT(16, 0)
return None;
#else
return std::nullopt;
#endif
default:
report_fatal_error("Bad CodeModel.");
}
}
enum class LLVMRustCodeGenOptLevel {
None,
Less,
Default,
Aggressive,
};
static CodeGenOpt::Level fromRust(LLVMRustCodeGenOptLevel Level) {
switch (Level) {
case LLVMRustCodeGenOptLevel::None:
return CodeGenOpt::None;
case LLVMRustCodeGenOptLevel::Less:
return CodeGenOpt::Less;
case LLVMRustCodeGenOptLevel::Default:
return CodeGenOpt::Default;
case LLVMRustCodeGenOptLevel::Aggressive:
return CodeGenOpt::Aggressive;
default:
report_fatal_error("Bad CodeGenOptLevel.");
}
}
enum class LLVMRustPassBuilderOptLevel {
O0,
O1,
O2,
O3,
Os,
Oz,
};
static OptimizationLevel fromRust(LLVMRustPassBuilderOptLevel Level) {
switch (Level) {
case LLVMRustPassBuilderOptLevel::O0:
return OptimizationLevel::O0;
case LLVMRustPassBuilderOptLevel::O1:
return OptimizationLevel::O1;
case LLVMRustPassBuilderOptLevel::O2:
return OptimizationLevel::O2;
case LLVMRustPassBuilderOptLevel::O3:
return OptimizationLevel::O3;
case LLVMRustPassBuilderOptLevel::Os:
return OptimizationLevel::Os;
case LLVMRustPassBuilderOptLevel::Oz:
return OptimizationLevel::Oz;
default:
report_fatal_error("Bad PassBuilderOptLevel.");
}
}
enum class LLVMRustRelocModel {
Static,
PIC,
DynamicNoPic,
ROPI,
RWPI,
ROPIRWPI,
};
static Reloc::Model fromRust(LLVMRustRelocModel RustReloc) {
switch (RustReloc) {
case LLVMRustRelocModel::Static:
return Reloc::Static;
case LLVMRustRelocModel::PIC:
return Reloc::PIC_;
case LLVMRustRelocModel::DynamicNoPic:
return Reloc::DynamicNoPIC;
case LLVMRustRelocModel::ROPI:
return Reloc::ROPI;
case LLVMRustRelocModel::RWPI:
return Reloc::RWPI;
case LLVMRustRelocModel::ROPIRWPI:
return Reloc::ROPI_RWPI;
}
report_fatal_error("Bad RelocModel.");
}
/// getLongestEntryLength - Return the length of the longest entry in the table.
template<typename KV>
static size_t getLongestEntryLength(ArrayRef<KV> Table) {
size_t MaxLen = 0;
for (auto &I : Table)
MaxLen = std::max(MaxLen, std::strlen(I.Key));
return MaxLen;
}
using PrintBackendInfo = void(void*, const char* Data, size_t Len);
extern "C" void LLVMRustPrintTargetCPUs(LLVMTargetMachineRef TM,
const char* TargetCPU,
PrintBackendInfo Print,
void* Out) {
const TargetMachine *Target = unwrap(TM);
const Triple::ArchType HostArch = Triple(sys::getDefaultTargetTriple()).getArch();
2017-09-07 20:07:16 -05:00
const Triple::ArchType TargetArch = Target->getTargetTriple().getArch();
std::ostringstream Buf;
#if LLVM_VERSION_GE(17, 0)
const MCSubtargetInfo *MCInfo = Target->getMCSubtargetInfo();
const ArrayRef<SubtargetSubTypeKV> CPUTable = MCInfo->getAllProcessorDescriptions();
#else
Buf << "Full target CPU help is not supported by this LLVM version.\n\n";
SubtargetSubTypeKV TargetCPUKV = { TargetCPU, {{}}, {{}} };
const ArrayRef<SubtargetSubTypeKV> CPUTable = TargetCPUKV;
#endif
unsigned MaxCPULen = getLongestEntryLength(CPUTable);
Buf << "Available CPUs for this target:\n";
// Don't print the "native" entry when the user specifies --target with a
// different arch since that could be wrong or misleading.
2017-09-07 20:07:16 -05:00
if (HostArch == TargetArch) {
MaxCPULen = std::max(MaxCPULen, (unsigned) std::strlen("native"));
2017-09-07 20:07:16 -05:00
const StringRef HostCPU = sys::getHostCPUName();
Buf << " " << std::left << std::setw(MaxCPULen) << "native"
<< " - Select the CPU of the current host "
"(currently " << HostCPU.str() << ").\n";
2017-09-07 20:07:16 -05:00
}
2023-04-28 16:23:40 -05:00
for (auto &CPU : CPUTable) {
// Compare cpu against current target to label the default
if (strcmp(CPU.Key, TargetCPU) == 0) {
Buf << " " << std::left << std::setw(MaxCPULen) << CPU.Key
<< " - This is the default target CPU for the current build target "
"(currently " << Target->getTargetTriple().str() << ").";
}
else {
Buf << " " << CPU.Key;
}
Buf << "\n";
2023-04-28 16:23:40 -05:00
}
const auto &BufString = Buf.str();
Print(Out, BufString.data(), BufString.size());
}
extern "C" size_t LLVMRustGetTargetFeaturesCount(LLVMTargetMachineRef TM) {
#ifdef LLVM_RUSTLLVM
const TargetMachine *Target = unwrap(TM);
const MCSubtargetInfo *MCInfo = Target->getMCSubtargetInfo();
const ArrayRef<SubtargetFeatureKV> FeatTable = MCInfo->getFeatureTable();
return FeatTable.size();
#else
return 0;
#endif
}
extern "C" void LLVMRustGetTargetFeature(LLVMTargetMachineRef TM, size_t Index,
const char** Feature, const char** Desc) {
#ifdef LLVM_RUSTLLVM
const TargetMachine *Target = unwrap(TM);
const MCSubtargetInfo *MCInfo = Target->getMCSubtargetInfo();
const ArrayRef<SubtargetFeatureKV> FeatTable = MCInfo->getFeatureTable();
const SubtargetFeatureKV Feat = FeatTable[Index];
*Feature = Feat.Key;
*Desc = Feat.Desc;
#endif
}
extern "C" const char* LLVMRustGetHostCPUName(size_t *len) {
StringRef Name = sys::getHostCPUName();
*len = Name.size();
return Name.data();
}
extern "C" LLVMTargetMachineRef LLVMRustCreateTargetMachine(
const char *TripleStr, const char *CPU, const char *Feature,
const char *ABIStr, LLVMRustCodeModel RustCM, LLVMRustRelocModel RustReloc,
LLVMRustCodeGenOptLevel RustOptLevel, bool UseSoftFloat,
bool FunctionSections,
std: Add a new wasm32-unknown-unknown target This commit adds a new target to the compiler: wasm32-unknown-unknown. This target is a reimagining of what it looks like to generate WebAssembly code from Rust. Instead of using Emscripten which can bring with it a weighty runtime this instead is a target which uses only the LLVM backend for WebAssembly and a "custom linker" for now which will hopefully one day be direct calls to lld. Notable features of this target include: * There is zero runtime footprint. The target assumes nothing exists other than the wasm32 instruction set. * There is zero toolchain footprint beyond adding the target. No custom linker is needed, rustc contains everything. * Very small wasm modules can be generated directly from Rust code using this target. * Most of the standard library is stubbed out to return an error, but anything related to allocation works (aka `HashMap`, `Vec`, etc). * Naturally, any `#[no_std]` crate should be 100% compatible with this new target. This target is currently somewhat janky due to how linking works. The "linking" is currently unconditional whole program LTO (aka LLVM is being used as a linker). Naturally that means compiling programs is pretty slow! Eventually though this target should have a linker. This target is also intended to be quite experimental. I'm hoping that this can act as a catalyst for further experimentation in Rust with WebAssembly. Breaking changes are very likely to land to this target, so it's not recommended to rely on it in any critical capacity yet. We'll let you know when it's "production ready". --- Currently testing-wise this target is looking pretty good but isn't complete. I've got almost the entire `run-pass` test suite working with this target (lots of tests ignored, but many passing as well). The `core` test suite is still getting LLVM bugs fixed to get that working and will take some time. Relatively simple programs all seem to work though! --- It's worth nothing that you may not immediately see the "smallest possible wasm module" for the input you feed to rustc. For various reasons it's very difficult to get rid of the final "bloat" in vanilla rustc (again, a real linker should fix all this). For now what you'll have to do is: cargo install --git https://github.com/alexcrichton/wasm-gc wasm-gc foo.wasm bar.wasm And then `bar.wasm` should be the smallest we can get it! --- In any case for now I'd love feedback on this, particularly on the various integration points if you've got better ideas of how to approach them!
2017-10-22 22:01:00 -05:00
bool DataSections,
bool UniqueSectionNames,
std: Add a new wasm32-unknown-unknown target This commit adds a new target to the compiler: wasm32-unknown-unknown. This target is a reimagining of what it looks like to generate WebAssembly code from Rust. Instead of using Emscripten which can bring with it a weighty runtime this instead is a target which uses only the LLVM backend for WebAssembly and a "custom linker" for now which will hopefully one day be direct calls to lld. Notable features of this target include: * There is zero runtime footprint. The target assumes nothing exists other than the wasm32 instruction set. * There is zero toolchain footprint beyond adding the target. No custom linker is needed, rustc contains everything. * Very small wasm modules can be generated directly from Rust code using this target. * Most of the standard library is stubbed out to return an error, but anything related to allocation works (aka `HashMap`, `Vec`, etc). * Naturally, any `#[no_std]` crate should be 100% compatible with this new target. This target is currently somewhat janky due to how linking works. The "linking" is currently unconditional whole program LTO (aka LLVM is being used as a linker). Naturally that means compiling programs is pretty slow! Eventually though this target should have a linker. This target is also intended to be quite experimental. I'm hoping that this can act as a catalyst for further experimentation in Rust with WebAssembly. Breaking changes are very likely to land to this target, so it's not recommended to rely on it in any critical capacity yet. We'll let you know when it's "production ready". --- Currently testing-wise this target is looking pretty good but isn't complete. I've got almost the entire `run-pass` test suite working with this target (lots of tests ignored, but many passing as well). The `core` test suite is still getting LLVM bugs fixed to get that working and will take some time. Relatively simple programs all seem to work though! --- It's worth nothing that you may not immediately see the "smallest possible wasm module" for the input you feed to rustc. For various reasons it's very difficult to get rid of the final "bloat" in vanilla rustc (again, a real linker should fix all this). For now what you'll have to do is: cargo install --git https://github.com/alexcrichton/wasm-gc wasm-gc foo.wasm bar.wasm And then `bar.wasm` should be the smallest we can get it! --- In any case for now I'd love feedback on this, particularly on the various integration points if you've got better ideas of how to approach them!
2017-10-22 22:01:00 -05:00
bool TrapUnreachable,
bool Singlethread,
2018-09-13 12:43:15 -05:00
bool AsmComments,
bool EmitStackSizeSection,
bool RelaxELFRelocations,
bool UseInitArray,
const char *SplitDwarfFile,
bool ForceEmulatedTls) {
auto OptLevel = fromRust(RustOptLevel);
auto RM = fromRust(RustReloc);
auto CM = fromRust(RustCM);
std::string Error;
Triple Trip(Triple::normalize(TripleStr));
const llvm::Target *TheTarget =
TargetRegistry::lookupTarget(Trip.getTriple(), Error);
if (TheTarget == nullptr) {
LLVMRustSetLastError(Error.c_str());
return nullptr;
}
2013-08-22 22:58:42 -05:00
2023-09-07 04:36:21 -05:00
TargetOptions Options = codegen::InitTargetOptionsFromCodeGenFlags(Trip);
Options.FloatABIType = FloatABI::Default;
if (UseSoftFloat) {
Options.FloatABIType = FloatABI::Soft;
}
Options.DataSections = DataSections;
Options.FunctionSections = FunctionSections;
Options.UniqueSectionNames = UniqueSectionNames;
Options.MCOptions.AsmVerbose = AsmComments;
Options.MCOptions.PreserveAsmComments = AsmComments;
Options.MCOptions.ABIName = ABIStr;
if (SplitDwarfFile) {
Options.MCOptions.SplitDwarfFile = SplitDwarfFile;
}
Options.RelaxELFRelocations = RelaxELFRelocations;
Options.UseInitArray = UseInitArray;
#if LLVM_VERSION_LT(17, 0)
if (ForceEmulatedTls) {
Options.ExplicitEmulatedTLS = true;
Options.EmulatedTLS = true;
}
#else
Options.EmulatedTLS = ForceEmulatedTls || Trip.hasDefaultEmulatedTLS();
#endif
if (TrapUnreachable) {
2018-05-08 08:10:16 -05:00
// Tell LLVM to codegen `unreachable` into an explicit trap instruction.
// This limits the extent of possible undefined behavior in some cases, as
// it prevents control flow from "falling through" into whatever code
// happens to be laid out next in memory.
Options.TrapUnreachable = true;
}
std: Add a new wasm32-unknown-unknown target This commit adds a new target to the compiler: wasm32-unknown-unknown. This target is a reimagining of what it looks like to generate WebAssembly code from Rust. Instead of using Emscripten which can bring with it a weighty runtime this instead is a target which uses only the LLVM backend for WebAssembly and a "custom linker" for now which will hopefully one day be direct calls to lld. Notable features of this target include: * There is zero runtime footprint. The target assumes nothing exists other than the wasm32 instruction set. * There is zero toolchain footprint beyond adding the target. No custom linker is needed, rustc contains everything. * Very small wasm modules can be generated directly from Rust code using this target. * Most of the standard library is stubbed out to return an error, but anything related to allocation works (aka `HashMap`, `Vec`, etc). * Naturally, any `#[no_std]` crate should be 100% compatible with this new target. This target is currently somewhat janky due to how linking works. The "linking" is currently unconditional whole program LTO (aka LLVM is being used as a linker). Naturally that means compiling programs is pretty slow! Eventually though this target should have a linker. This target is also intended to be quite experimental. I'm hoping that this can act as a catalyst for further experimentation in Rust with WebAssembly. Breaking changes are very likely to land to this target, so it's not recommended to rely on it in any critical capacity yet. We'll let you know when it's "production ready". --- Currently testing-wise this target is looking pretty good but isn't complete. I've got almost the entire `run-pass` test suite working with this target (lots of tests ignored, but many passing as well). The `core` test suite is still getting LLVM bugs fixed to get that working and will take some time. Relatively simple programs all seem to work though! --- It's worth nothing that you may not immediately see the "smallest possible wasm module" for the input you feed to rustc. For various reasons it's very difficult to get rid of the final "bloat" in vanilla rustc (again, a real linker should fix all this). For now what you'll have to do is: cargo install --git https://github.com/alexcrichton/wasm-gc wasm-gc foo.wasm bar.wasm And then `bar.wasm` should be the smallest we can get it! --- In any case for now I'd love feedback on this, particularly on the various integration points if you've got better ideas of how to approach them!
2017-10-22 22:01:00 -05:00
if (Singlethread) {
Options.ThreadModel = ThreadModel::Single;
}
2018-09-13 12:43:15 -05:00
Options.EmitStackSizeSection = EmitStackSizeSection;
TargetMachine *TM = TheTarget->createTargetMachine(
Trip.getTriple(), CPU, Feature, Options, RM, CM, OptLevel);
return wrap(TM);
2013-08-22 22:58:42 -05:00
}
extern "C" void LLVMRustDisposeTargetMachine(LLVMTargetMachineRef TM) {
delete unwrap(TM);
2013-08-22 22:58:42 -05:00
}
// Unfortunately, the LLVM C API doesn't provide a way to create the
// TargetLibraryInfo pass, so we use this method to do so.
extern "C" void LLVMRustAddLibraryInfo(LLVMPassManagerRef PMR, LLVMModuleRef M,
bool DisableSimplifyLibCalls) {
Triple TargetTriple(unwrap(M)->getTargetTriple());
TargetLibraryInfoImpl TLII(TargetTriple);
if (DisableSimplifyLibCalls)
TLII.disableAllFunctions();
unwrap(PMR)->add(new TargetLibraryInfoWrapperPass(TLII));
2013-08-22 22:58:42 -05:00
}
extern "C" void LLVMRustSetLLVMOptions(int Argc, char **Argv) {
// Initializing the command-line options more than once is not allowed. So,
// check if they've already been initialized. (This could happen if we're
// being called from rustpkg, for example). If the arguments change, then
// that's just kinda unfortunate.
static bool Initialized = false;
if (Initialized)
return;
Initialized = true;
cl::ParseCommandLineOptions(Argc, Argv);
2013-08-22 22:58:42 -05:00
}
enum class LLVMRustFileType {
AssemblyFile,
ObjectFile,
};
static CodeGenFileType fromRust(LLVMRustFileType Type) {
switch (Type) {
case LLVMRustFileType::AssemblyFile:
return CGFT_AssemblyFile;
case LLVMRustFileType::ObjectFile:
return CGFT_ObjectFile;
default:
report_fatal_error("Bad FileType.");
}
}
extern "C" LLVMRustResult
LLVMRustWriteOutputFile(LLVMTargetMachineRef Target, LLVMPassManagerRef PMR,
LLVMModuleRef M, const char *Path, const char *DwoPath,
LLVMRustFileType RustFileType) {
llvm::legacy::PassManager *PM = unwrap<llvm::legacy::PassManager>(PMR);
auto FileType = fromRust(RustFileType);
2013-08-22 22:58:42 -05:00
std::string ErrorInfo;
2014-09-30 16:20:22 -05:00
std::error_code EC;
raw_fd_ostream OS(Path, EC, sys::fs::OF_None);
2014-09-30 16:20:22 -05:00
if (EC)
ErrorInfo = EC.message();
2013-08-22 22:58:42 -05:00
if (ErrorInfo != "") {
LLVMRustSetLastError(ErrorInfo.c_str());
return LLVMRustResult::Failure;
2013-08-22 22:58:42 -05:00
}
buffer_ostream BOS(OS);
if (DwoPath) {
raw_fd_ostream DOS(DwoPath, EC, sys::fs::OF_None);
EC.clear();
if (EC)
ErrorInfo = EC.message();
if (ErrorInfo != "") {
LLVMRustSetLastError(ErrorInfo.c_str());
return LLVMRustResult::Failure;
}
buffer_ostream DBOS(DOS);
unwrap(Target)->addPassesToEmitFile(*PM, BOS, &DBOS, FileType, false);
PM->run(*unwrap(M));
} else {
unwrap(Target)->addPassesToEmitFile(*PM, BOS, nullptr, FileType, false);
PM->run(*unwrap(M));
}
// Apparently `addPassesToEmitFile` adds a pointer to our on-the-stack output
// stream (OS), so the only real safe place to delete this is here? Don't we
// wish this was written in Rust?
LLVMDisposePassManager(PMR);
return LLVMRustResult::Success;
2013-08-22 22:58:42 -05:00
}
extern "C" typedef void (*LLVMRustSelfProfileBeforePassCallback)(void*, // LlvmSelfProfiler
const char*, // pass name
const char*); // IR name
extern "C" typedef void (*LLVMRustSelfProfileAfterPassCallback)(void*); // LlvmSelfProfiler
std::string LLVMRustwrappedIrGetName(const llvm::Any &WrappedIr) {
2023-04-18 23:54:03 -05:00
if (const auto *Cast = any_cast<const Module *>(&WrappedIr))
return (*Cast)->getName().str();
if (const auto *Cast = any_cast<const Function *>(&WrappedIr))
return (*Cast)->getName().str();
if (const auto *Cast = any_cast<const Loop *>(&WrappedIr))
return (*Cast)->getName().str();
if (const auto *Cast = any_cast<const LazyCallGraph::SCC *>(&WrappedIr))
return (*Cast)->getName();
return "<UNKNOWN>";
}
void LLVMSelfProfileInitializeCallbacks(
PassInstrumentationCallbacks& PIC, void* LlvmSelfProfiler,
LLVMRustSelfProfileBeforePassCallback BeforePassCallback,
LLVMRustSelfProfileAfterPassCallback AfterPassCallback) {
2020-11-03 15:47:16 -06:00
PIC.registerBeforeNonSkippedPassCallback([LlvmSelfProfiler, BeforePassCallback](
StringRef Pass, llvm::Any Ir) {
std::string PassName = Pass.str();
std::string IrName = LLVMRustwrappedIrGetName(Ir);
BeforePassCallback(LlvmSelfProfiler, PassName.c_str(), IrName.c_str());
});
PIC.registerAfterPassCallback(
[LlvmSelfProfiler, AfterPassCallback](StringRef Pass, llvm::Any IR,
const PreservedAnalyses &Preserved) {
AfterPassCallback(LlvmSelfProfiler);
});
PIC.registerAfterPassInvalidatedCallback(
[LlvmSelfProfiler, AfterPassCallback](StringRef Pass, const PreservedAnalyses &Preserved) {
AfterPassCallback(LlvmSelfProfiler);
});
PIC.registerBeforeAnalysisCallback([LlvmSelfProfiler, BeforePassCallback](
StringRef Pass, llvm::Any Ir) {
std::string PassName = Pass.str();
std::string IrName = LLVMRustwrappedIrGetName(Ir);
BeforePassCallback(LlvmSelfProfiler, PassName.c_str(), IrName.c_str());
});
PIC.registerAfterAnalysisCallback(
[LlvmSelfProfiler, AfterPassCallback](StringRef Pass, llvm::Any Ir) {
AfterPassCallback(LlvmSelfProfiler);
});
}
enum class LLVMRustOptStage {
PreLinkNoLTO,
PreLinkThinLTO,
PreLinkFatLTO,
ThinLTO,
FatLTO,
};
struct LLVMRustSanitizerOptions {
bool SanitizeAddress;
bool SanitizeAddressRecover;
bool SanitizeCFI;
bool SanitizeKCFI;
bool SanitizeMemory;
bool SanitizeMemoryRecover;
int SanitizeMemoryTrackOrigins;
bool SanitizeThread;
2021-01-22 20:32:38 -06:00
bool SanitizeHWAddress;
bool SanitizeHWAddressRecover;
bool SanitizeKernelAddress;
bool SanitizeKernelAddressRecover;
};
extern "C" LLVMRustResult
LLVMRustOptimize(
LLVMModuleRef ModuleRef,
LLVMTargetMachineRef TMRef,
LLVMRustPassBuilderOptLevel OptLevelRust,
LLVMRustOptStage OptStage,
bool IsLinkerPluginLTO,
bool NoPrepopulatePasses, bool VerifyIR, bool UseThinLTOBuffers,
bool MergeFunctions, bool UnrollLoops, bool SLPVectorize, bool LoopVectorize,
bool DisableSimplifyLibCalls, bool EmitLifetimeMarkers,
LLVMRustSanitizerOptions *SanitizerOptions,
const char *PGOGenPath, const char *PGOUsePath,
bool InstrumentCoverage, const char *InstrProfileOutput,
bool InstrumentGCOV,
const char *PGOSampleUsePath, bool DebugInfoForProfiling,
void* LlvmSelfProfiler,
LLVMRustSelfProfileBeforePassCallback BeforePassCallback,
LLVMRustSelfProfileAfterPassCallback AfterPassCallback,
const char *ExtraPasses, size_t ExtraPassesLen,
const char *LLVMPlugins, size_t LLVMPluginsLen) {
Module *TheModule = unwrap(ModuleRef);
TargetMachine *TM = unwrap(TMRef);
OptimizationLevel OptLevel = fromRust(OptLevelRust);
PipelineTuningOptions PTO;
PTO.LoopUnrolling = UnrollLoops;
PTO.LoopInterleaving = UnrollLoops;
PTO.LoopVectorization = LoopVectorize;
PTO.SLPVectorization = SLPVectorize;
PTO.MergeFunctions = MergeFunctions;
2020-11-03 15:47:16 -06:00
// FIXME: We may want to expose this as an option.
bool DebugPassManager = false;
PassInstrumentationCallbacks PIC;
#if LLVM_VERSION_LT(16, 0)
2020-11-03 15:47:16 -06:00
StandardInstrumentations SI(DebugPassManager);
#else
StandardInstrumentations SI(TheModule->getContext(), DebugPassManager);
#endif
SI.registerCallbacks(PIC);
if (LlvmSelfProfiler){
LLVMSelfProfileInitializeCallbacks(PIC,LlvmSelfProfiler,BeforePassCallback,AfterPassCallback);
}
#if LLVM_VERSION_LT(16, 0)
Optional<PGOOptions> PGOOpt;
#else
std::optional<PGOOptions> PGOOpt;
#endif
#if LLVM_VERSION_GE(17, 0)
auto FS = vfs::getRealFileSystem();
#endif
if (PGOGenPath) {
assert(!PGOUsePath && !PGOSampleUsePath);
PGOOpt = PGOOptions(PGOGenPath, "", "",
#if LLVM_VERSION_GE(17, 0)
"",
FS,
#endif
PGOOptions::IRInstr, PGOOptions::NoCSAction,
DebugInfoForProfiling);
} else if (PGOUsePath) {
assert(!PGOSampleUsePath);
PGOOpt = PGOOptions(PGOUsePath, "", "",
#if LLVM_VERSION_GE(17, 0)
"",
FS,
#endif
PGOOptions::IRUse, PGOOptions::NoCSAction,
DebugInfoForProfiling);
} else if (PGOSampleUsePath) {
PGOOpt = PGOOptions(PGOSampleUsePath, "", "",
#if LLVM_VERSION_GE(17, 0)
"",
FS,
#endif
PGOOptions::SampleUse, PGOOptions::NoCSAction,
DebugInfoForProfiling);
} else if (DebugInfoForProfiling) {
PGOOpt = PGOOptions("", "", "",
#if LLVM_VERSION_GE(17, 0)
"",
FS,
#endif
PGOOptions::NoAction, PGOOptions::NoCSAction,
DebugInfoForProfiling);
}
2021-10-22 12:50:07 -05:00
PassBuilder PB(TM, PTO, PGOOpt, &PIC);
LoopAnalysisManager LAM;
FunctionAnalysisManager FAM;
CGSCCAnalysisManager CGAM;
ModuleAnalysisManager MAM;
FAM.registerPass([&] { return PB.buildDefaultAAPipeline(); });
Triple TargetTriple(TheModule->getTargetTriple());
std::unique_ptr<TargetLibraryInfoImpl> TLII(new TargetLibraryInfoImpl(TargetTriple));
if (DisableSimplifyLibCalls)
TLII->disableAllFunctions();
FAM.registerPass([&] { return TargetLibraryAnalysis(*TLII); });
PB.registerModuleAnalyses(MAM);
PB.registerCGSCCAnalyses(CGAM);
PB.registerFunctionAnalyses(FAM);
PB.registerLoopAnalyses(LAM);
PB.crossRegisterProxies(LAM, FAM, CGAM, MAM);
// We manually collect pipeline callbacks so we can apply them at O0, where the
// PassBuilder does not create a pipeline.
std::vector<std::function<void(ModulePassManager &, OptimizationLevel)>>
2020-11-03 15:47:16 -06:00
PipelineStartEPCallbacks;
std::vector<std::function<void(ModulePassManager &, OptimizationLevel)>>
2020-06-25 20:52:41 -05:00
OptimizerLastEPCallbacks;
if (!IsLinkerPluginLTO
&& SanitizerOptions && SanitizerOptions->SanitizeCFI
&& !NoPrepopulatePasses) {
PipelineStartEPCallbacks.push_back(
[](ModulePassManager &MPM, OptimizationLevel Level) {
MPM.addPass(LowerTypeTestsPass(/*ExportSummary=*/nullptr,
/*ImportSummary=*/nullptr,
/*DropTypeTests=*/false));
}
);
}
if (VerifyIR) {
2020-11-03 15:47:16 -06:00
PipelineStartEPCallbacks.push_back(
[VerifyIR](ModulePassManager &MPM, OptimizationLevel Level) {
MPM.addPass(VerifierPass());
2020-11-03 15:47:16 -06:00
}
);
}
if (InstrumentGCOV) {
PipelineStartEPCallbacks.push_back(
[](ModulePassManager &MPM, OptimizationLevel Level) {
MPM.addPass(GCOVProfilerPass(GCOVOptions::getDefault()));
}
);
}
if (InstrumentCoverage) {
PipelineStartEPCallbacks.push_back(
[InstrProfileOutput](ModulePassManager &MPM, OptimizationLevel Level) {
InstrProfOptions Options;
if (InstrProfileOutput) {
Options.InstrProfileOutput = InstrProfileOutput;
}
// cargo run tests in multhreading mode by default
// so use atomics for coverage counters
Options.Atomic = true;
MPM.addPass(InstrProfiling(Options, false));
}
);
}
if (SanitizerOptions) {
if (SanitizerOptions->SanitizeMemory) {
MemorySanitizerOptions Options(
SanitizerOptions->SanitizeMemoryTrackOrigins,
SanitizerOptions->SanitizeMemoryRecover,
/*CompileKernel=*/false,
/*EagerChecks=*/true);
2020-06-25 20:52:41 -05:00
OptimizerLastEPCallbacks.push_back(
[Options](ModulePassManager &MPM, OptimizationLevel Level) {
2023-02-01 14:52:06 -06:00
#if LLVM_VERSION_LT(16, 0)
MPM.addPass(ModuleMemorySanitizerPass(Options));
2023-02-01 14:52:06 -06:00
MPM.addPass(createModuleToFunctionPassAdaptor(MemorySanitizerPass(Options)));
#else
2020-06-25 20:52:41 -05:00
MPM.addPass(MemorySanitizerPass(Options));
#endif
2020-06-25 20:52:41 -05:00
}
);
}
if (SanitizerOptions->SanitizeThread) {
2020-06-25 20:52:41 -05:00
OptimizerLastEPCallbacks.push_back(
[](ModulePassManager &MPM, OptimizationLevel Level) {
MPM.addPass(ModuleThreadSanitizerPass());
MPM.addPass(createModuleToFunctionPassAdaptor(ThreadSanitizerPass()));
2020-06-25 20:52:41 -05:00
}
);
}
if (SanitizerOptions->SanitizeAddress || SanitizerOptions->SanitizeKernelAddress) {
2020-06-25 20:52:41 -05:00
OptimizerLastEPCallbacks.push_back(
[SanitizerOptions](ModulePassManager &MPM, OptimizationLevel Level) {
auto CompileKernel = SanitizerOptions->SanitizeKernelAddress;
AddressSanitizerOptions opts = AddressSanitizerOptions{
CompileKernel,
SanitizerOptions->SanitizeAddressRecover
|| SanitizerOptions->SanitizeKernelAddressRecover,
2021-11-04 17:08:32 -05:00
/*UseAfterScope=*/true,
AsanDetectStackUseAfterReturnMode::Runtime,
};
#if LLVM_VERSION_LT(16, 0)
MPM.addPass(ModuleAddressSanitizerPass(opts));
#else
MPM.addPass(AddressSanitizerPass(opts));
#endif
2020-06-25 20:52:41 -05:00
}
);
2021-01-22 20:32:38 -06:00
}
if (SanitizerOptions->SanitizeHWAddress) {
OptimizerLastEPCallbacks.push_back(
[SanitizerOptions](ModulePassManager &MPM, OptimizationLevel Level) {
HWAddressSanitizerOptions opts(
/*CompileKernel=*/false, SanitizerOptions->SanitizeHWAddressRecover,
/*DisableOptimization=*/false);
MPM.addPass(HWAddressSanitizerPass(opts));
2021-01-22 20:32:38 -06:00
}
);
}
}
if (LLVMPluginsLen) {
auto PluginsStr = StringRef(LLVMPlugins, LLVMPluginsLen);
SmallVector<StringRef> Plugins;
PluginsStr.split(Plugins, ',', -1, false);
for (auto PluginPath: Plugins) {
auto Plugin = PassPlugin::Load(PluginPath.str());
if (!Plugin) {
LLVMRustSetLastError(("Failed to load pass plugin" + PluginPath.str()).c_str());
return LLVMRustResult::Failure;
}
Plugin->registerPassBuilderCallbacks(PB);
}
}
ModulePassManager MPM;
2020-11-03 15:47:16 -06:00
bool NeedThinLTOBufferPasses = UseThinLTOBuffers;
if (!NoPrepopulatePasses) {
// The pre-link pipelines don't support O0 and require using buildO0DefaultPipeline() instead.
// At the same time, the LTO pipelines do support O0 and using them is required.
bool IsLTO = OptStage == LLVMRustOptStage::ThinLTO || OptStage == LLVMRustOptStage::FatLTO;
if (OptLevel == OptimizationLevel::O0 && !IsLTO) {
for (const auto &C : PipelineStartEPCallbacks)
2020-11-03 15:47:16 -06:00
PB.registerPipelineStartEPCallback(C);
for (const auto &C : OptimizerLastEPCallbacks)
PB.registerOptimizerLastEPCallback(C);
2020-11-03 15:47:16 -06:00
// Pass false as we manually schedule ThinLTOBufferPasses below.
MPM = PB.buildO0DefaultPipeline(OptLevel, /* PreLinkLTO */ false);
} else {
for (const auto &C : PipelineStartEPCallbacks)
PB.registerPipelineStartEPCallback(C);
if (OptStage != LLVMRustOptStage::PreLinkThinLTO) {
for (const auto &C : OptimizerLastEPCallbacks)
PB.registerOptimizerLastEPCallback(C);
}
switch (OptStage) {
case LLVMRustOptStage::PreLinkNoLTO:
MPM = PB.buildPerModuleDefaultPipeline(OptLevel, DebugPassManager);
break;
case LLVMRustOptStage::PreLinkThinLTO:
2020-11-03 15:47:16 -06:00
MPM = PB.buildThinLTOPreLinkDefaultPipeline(OptLevel);
// The ThinLTOPreLink pipeline already includes ThinLTOBuffer passes. However, callback
// passes may still run afterwards. This means we need to run the buffer passes again.
// FIXME: In LLVM 13, the ThinLTOPreLink pipeline also runs OptimizerLastEPCallbacks
// before the RequiredLTOPreLinkPasses, in which case we can remove these hacks.
if (OptimizerLastEPCallbacks.empty())
NeedThinLTOBufferPasses = false;
2020-06-25 20:52:41 -05:00
for (const auto &C : OptimizerLastEPCallbacks)
C(MPM, OptLevel);
break;
case LLVMRustOptStage::PreLinkFatLTO:
2020-11-03 15:47:16 -06:00
MPM = PB.buildLTOPreLinkDefaultPipeline(OptLevel);
NeedThinLTOBufferPasses = false;
break;
case LLVMRustOptStage::ThinLTO:
// FIXME: Does it make sense to pass the ModuleSummaryIndex?
// It only seems to be needed for C++ specific optimizations.
2020-11-03 15:47:16 -06:00
MPM = PB.buildThinLTODefaultPipeline(OptLevel, nullptr);
break;
case LLVMRustOptStage::FatLTO:
2020-11-03 15:47:16 -06:00
MPM = PB.buildLTODefaultPipeline(OptLevel, nullptr);
break;
}
}
} else {
// We're not building any of the default pipelines but we still want to
// add the verifier, instrumentation, etc passes if they were requested
for (const auto &C : PipelineStartEPCallbacks)
C(MPM, OptLevel);
for (const auto &C : OptimizerLastEPCallbacks)
C(MPM, OptLevel);
}
if (ExtraPassesLen) {
if (auto Err = PB.parsePassPipeline(MPM, StringRef(ExtraPasses, ExtraPassesLen))) {
std::string ErrMsg = toString(std::move(Err));
LLVMRustSetLastError(ErrMsg.c_str());
return LLVMRustResult::Failure;
}
}
2020-11-03 15:47:16 -06:00
if (NeedThinLTOBufferPasses) {
MPM.addPass(CanonicalizeAliasesPass());
MPM.addPass(NameAnonGlobalPass());
}
// Upgrade all calls to old intrinsics first.
for (Module::iterator I = TheModule->begin(), E = TheModule->end(); I != E;)
UpgradeCallsToIntrinsic(&*I++); // must be post-increment, as we remove
MPM.run(*TheModule, MAM);
return LLVMRustResult::Success;
}
// Callback to demangle function name
// Parameters:
// * name to be demangled
// * name len
// * output buffer
// * output buffer len
// Returns len of demangled string, or 0 if demangle failed.
typedef size_t (*DemangleFn)(const char*, size_t, char*, size_t);
namespace {
class RustAssemblyAnnotationWriter : public AssemblyAnnotationWriter {
DemangleFn Demangle;
std::vector<char> Buf;
public:
RustAssemblyAnnotationWriter(DemangleFn Demangle) : Demangle(Demangle) {}
// Return empty string if demangle failed
// or if name does not need to be demangled
StringRef CallDemangle(StringRef name) {
if (!Demangle) {
return StringRef();
}
if (Buf.size() < name.size() * 2) {
// Semangled name usually shorter than mangled,
// but allocate twice as much memory just in case
Buf.resize(name.size() * 2);
}
auto R = Demangle(name.data(), name.size(), Buf.data(), Buf.size());
if (!R) {
// Demangle failed.
return StringRef();
}
auto Demangled = StringRef(Buf.data(), R);
if (Demangled == name) {
// Do not print anything if demangled name is equal to mangled.
return StringRef();
}
return Demangled;
}
void emitFunctionAnnot(const Function *F,
formatted_raw_ostream &OS) override {
StringRef Demangled = CallDemangle(F->getName());
if (Demangled.empty()) {
return;
}
OS << "; " << Demangled << "\n";
}
void emitInstructionAnnot(const Instruction *I,
formatted_raw_ostream &OS) override {
const char *Name;
const Value *Value;
if (const CallInst *CI = dyn_cast<CallInst>(I)) {
Name = "call";
2020-06-25 20:52:41 -05:00
Value = CI->getCalledOperand();
} else if (const InvokeInst* II = dyn_cast<InvokeInst>(I)) {
Name = "invoke";
2020-06-25 20:52:41 -05:00
Value = II->getCalledOperand();
} else {
// Could demangle more operations, e. g.
// `store %place, @function`.
return;
}
if (!Value->hasName()) {
return;
}
StringRef Demangled = CallDemangle(Value->getName());
if (Demangled.empty()) {
return;
}
OS << "; " << Name << " " << Demangled << "\n";
}
};
} // namespace
extern "C" LLVMRustResult
LLVMRustPrintModule(LLVMModuleRef M, const char *Path, DemangleFn Demangle) {
2013-08-22 22:58:42 -05:00
std::string ErrorInfo;
2014-09-30 16:20:22 -05:00
std::error_code EC;
raw_fd_ostream OS(Path, EC, sys::fs::OF_None);
2014-09-30 16:20:22 -05:00
if (EC)
ErrorInfo = EC.message();
if (ErrorInfo != "") {
LLVMRustSetLastError(ErrorInfo.c_str());
return LLVMRustResult::Failure;
}
RustAssemblyAnnotationWriter AAW(Demangle);
2013-08-22 22:58:42 -05:00
formatted_raw_ostream FOS(OS);
unwrap(M)->print(FOS, &AAW);
return LLVMRustResult::Success;
2013-08-22 22:58:42 -05:00
}
extern "C" void LLVMRustPrintPasses() {
PassBuilder PB;
PB.printPassNames(outs());
}
extern "C" void LLVMRustRunRestrictionPass(LLVMModuleRef M, char **Symbols,
size_t Len) {
auto PreserveFunctions = [=](const GlobalValue &GV) {
// Preserve LLVM-injected, ASAN-related symbols.
// See also https://github.com/rust-lang/rust/issues/113404.
if (GV.getName() == "___asan_globals_registered") {
return true;
}
// Preserve symbols exported from Rust modules.
for (size_t I = 0; I < Len; I++) {
if (GV.getName() == Symbols[I]) {
return true;
}
}
return false;
};
internalizeModule(*unwrap(M), PreserveFunctions);
Implement LTO This commit implements LTO for rust leveraging LLVM's passes. What this means is: * When compiling an rlib, in addition to insdering foo.o into the archive, also insert foo.bc (the LLVM bytecode) of the optimized module. * When the compiler detects the -Z lto option, it will attempt to perform LTO on a staticlib or binary output. The compiler will emit an error if a dylib or rlib output is being generated. * The actual act of performing LTO is as follows: 1. Force all upstream libraries to have an rlib version available. 2. Load the bytecode of each upstream library from the rlib. 3. Link all this bytecode into the current LLVM module (just using llvm apis) 4. Run an internalization pass which internalizes all symbols except those found reachable for the local crate of compilation. 5. Run the LLVM LTO pass manager over this entire module 6a. If assembling an archive, then add all upstream rlibs into the output archive. This ignores all of the object/bitcode/metadata files rust generated and placed inside the rlibs. 6b. If linking a binary, create copies of all upstream rlibs, remove the rust-generated object-file, and then link everything as usual. As I have explained in #10741, this process is excruciatingly slow, so this is *not* turned on by default, and it is also why I have decided to hide it behind a -Z flag for now. The good news is that the binary sizes are about as small as they can be as a result of LTO, so it's definitely working. Closes #10741 Closes #10740
2013-12-03 01:19:29 -06:00
}
extern "C" void
LLVMRustSetDataLayoutFromTargetMachine(LLVMModuleRef Module,
LLVMTargetMachineRef TMR) {
TargetMachine *Target = unwrap(TMR);
unwrap(Module)->setDataLayout(Target->createDataLayout());
}
extern "C" void LLVMRustSetModulePICLevel(LLVMModuleRef M) {
unwrap(M)->setPICLevel(PICLevel::Level::BigPIC);
}
extern "C" void LLVMRustSetModulePIELevel(LLVMModuleRef M) {
unwrap(M)->setPIELevel(PIELevel::Level::Large);
}
rustc: Implement ThinLTO This commit is an implementation of LLVM's ThinLTO for consumption in rustc itself. Currently today LTO works by merging all relevant LLVM modules into one and then running optimization passes. "Thin" LTO operates differently by having more sharded work and allowing parallelism opportunities between optimizing codegen units. Further down the road Thin LTO also allows *incremental* LTO which should enable even faster release builds without compromising on the performance we have today. This commit uses a `-Z thinlto` flag to gate whether ThinLTO is enabled. It then also implements two forms of ThinLTO: * In one mode we'll *only* perform ThinLTO over the codegen units produced in a single compilation. That is, we won't load upstream rlibs, but we'll instead just perform ThinLTO amongst all codegen units produced by the compiler for the local crate. This is intended to emulate a desired end point where we have codegen units turned on by default for all crates and ThinLTO allows us to do this without performance loss. * In anther mode, like full LTO today, we'll optimize all upstream dependencies in "thin" mode. Unlike today, however, this LTO step is fully parallelized so should finish much more quickly. There's a good bit of comments about what the implementation is doing and where it came from, but the tl;dr; is that currently most of the support here is copied from upstream LLVM. This code duplication is done for a number of reasons: * Controlling parallelism means we can use the existing jobserver support to avoid overloading machines. * We will likely want a slightly different form of incremental caching which integrates with our own incremental strategy, but this is yet to be determined. * This buys us some flexibility about when/where we run ThinLTO, as well as having it tailored to fit our needs for the time being. * Finally this allows us to reuse some artifacts such as our `TargetMachine` creation, where all our options we used today aren't necessarily supported by upstream LLVM yet. My hope is that we can get some experience with this copy/paste in tree and then eventually upstream some work to LLVM itself to avoid the duplication while still ensuring our needs are met. Otherwise I fear that maintaining these bindings may be quite costly over the years with LLVM updates!
2017-07-23 10:14:38 -05:00
extern "C" void LLVMRustSetModuleCodeModel(LLVMModuleRef M,
LLVMRustCodeModel Model) {
auto CM = fromRust(Model);
if (!CM)
return;
unwrap(M)->setCodeModel(*CM);
}
rustc: Implement ThinLTO This commit is an implementation of LLVM's ThinLTO for consumption in rustc itself. Currently today LTO works by merging all relevant LLVM modules into one and then running optimization passes. "Thin" LTO operates differently by having more sharded work and allowing parallelism opportunities between optimizing codegen units. Further down the road Thin LTO also allows *incremental* LTO which should enable even faster release builds without compromising on the performance we have today. This commit uses a `-Z thinlto` flag to gate whether ThinLTO is enabled. It then also implements two forms of ThinLTO: * In one mode we'll *only* perform ThinLTO over the codegen units produced in a single compilation. That is, we won't load upstream rlibs, but we'll instead just perform ThinLTO amongst all codegen units produced by the compiler for the local crate. This is intended to emulate a desired end point where we have codegen units turned on by default for all crates and ThinLTO allows us to do this without performance loss. * In anther mode, like full LTO today, we'll optimize all upstream dependencies in "thin" mode. Unlike today, however, this LTO step is fully parallelized so should finish much more quickly. There's a good bit of comments about what the implementation is doing and where it came from, but the tl;dr; is that currently most of the support here is copied from upstream LLVM. This code duplication is done for a number of reasons: * Controlling parallelism means we can use the existing jobserver support to avoid overloading machines. * We will likely want a slightly different form of incremental caching which integrates with our own incremental strategy, but this is yet to be determined. * This buys us some flexibility about when/where we run ThinLTO, as well as having it tailored to fit our needs for the time being. * Finally this allows us to reuse some artifacts such as our `TargetMachine` creation, where all our options we used today aren't necessarily supported by upstream LLVM yet. My hope is that we can get some experience with this copy/paste in tree and then eventually upstream some work to LLVM itself to avoid the duplication while still ensuring our needs are met. Otherwise I fear that maintaining these bindings may be quite costly over the years with LLVM updates!
2017-07-23 10:14:38 -05:00
// Here you'll find an implementation of ThinLTO as used by the Rust compiler
// right now. This ThinLTO support is only enabled on "recent ish" versions of
// LLVM, and otherwise it's just blanket rejected from other compilers.
//
// Most of this implementation is straight copied from LLVM. At the time of
// this writing it wasn't *quite* suitable to reuse more code from upstream
// for our purposes, but we should strive to upstream this support once it's
// ready to go! I figure we may want a bit of testing locally first before
// sending this upstream to LLVM. I hear though they're quite eager to receive
// feedback like this!
//
// If you're reading this code and wondering "what in the world" or you're
// working "good lord by LLVM upgrade is *still* failing due to these bindings"
// then fear not! (ok maybe fear a little). All code here is mostly based
// on `lib/LTO/ThinLTOCodeGenerator.cpp` in LLVM.
//
// You'll find that the general layout here roughly corresponds to the `run`
// method in that file as well as `ProcessThinLTOModule`. Functions are
// specifically commented below as well, but if you're updating this code
// or otherwise trying to understand it, the LLVM source will be useful in
// interpreting the mysteries within.
//
// Otherwise I'll apologize in advance, it probably requires a relatively
// significant investment on your part to "truly understand" what's going on
// here. Not saying I do myself, but it took me awhile staring at LLVM's source
// and various online resources about ThinLTO to make heads or tails of all
// this.
// This is a shared data structure which *must* be threadsafe to share
// read-only amongst threads. This also corresponds basically to the arguments
// of the `ProcessThinLTOModule` function in the LLVM source.
struct LLVMRustThinLTOData {
// The combined index that is the global analysis over all modules we're
// performing ThinLTO for. This is mostly managed by LLVM.
ModuleSummaryIndex Index;
// All modules we may look at, stored as in-memory serialized versions. This
// is later used when inlining to ensure we can extract any module to inline
// from.
StringMap<MemoryBufferRef> ModuleMap;
// A set that we manage of everything we *don't* want internalized. Note that
// this includes all transitive references right now as well, but it may not
// always!
DenseSet<GlobalValue::GUID> GUIDPreservedSymbols;
// Not 100% sure what these are, but they impact what's internalized and
// what's inlined across modules, I believe.
#if LLVM_VERSION_GE(18, 0)
DenseMap<StringRef, FunctionImporter::ImportMapTy> ImportLists;
DenseMap<StringRef, FunctionImporter::ExportSetTy> ExportLists;
DenseMap<StringRef, GVSummaryMapTy> ModuleToDefinedGVSummaries;
#else
rustc: Implement ThinLTO This commit is an implementation of LLVM's ThinLTO for consumption in rustc itself. Currently today LTO works by merging all relevant LLVM modules into one and then running optimization passes. "Thin" LTO operates differently by having more sharded work and allowing parallelism opportunities between optimizing codegen units. Further down the road Thin LTO also allows *incremental* LTO which should enable even faster release builds without compromising on the performance we have today. This commit uses a `-Z thinlto` flag to gate whether ThinLTO is enabled. It then also implements two forms of ThinLTO: * In one mode we'll *only* perform ThinLTO over the codegen units produced in a single compilation. That is, we won't load upstream rlibs, but we'll instead just perform ThinLTO amongst all codegen units produced by the compiler for the local crate. This is intended to emulate a desired end point where we have codegen units turned on by default for all crates and ThinLTO allows us to do this without performance loss. * In anther mode, like full LTO today, we'll optimize all upstream dependencies in "thin" mode. Unlike today, however, this LTO step is fully parallelized so should finish much more quickly. There's a good bit of comments about what the implementation is doing and where it came from, but the tl;dr; is that currently most of the support here is copied from upstream LLVM. This code duplication is done for a number of reasons: * Controlling parallelism means we can use the existing jobserver support to avoid overloading machines. * We will likely want a slightly different form of incremental caching which integrates with our own incremental strategy, but this is yet to be determined. * This buys us some flexibility about when/where we run ThinLTO, as well as having it tailored to fit our needs for the time being. * Finally this allows us to reuse some artifacts such as our `TargetMachine` creation, where all our options we used today aren't necessarily supported by upstream LLVM yet. My hope is that we can get some experience with this copy/paste in tree and then eventually upstream some work to LLVM itself to avoid the duplication while still ensuring our needs are met. Otherwise I fear that maintaining these bindings may be quite costly over the years with LLVM updates!
2017-07-23 10:14:38 -05:00
StringMap<FunctionImporter::ImportMapTy> ImportLists;
StringMap<FunctionImporter::ExportSetTy> ExportLists;
StringMap<GVSummaryMapTy> ModuleToDefinedGVSummaries;
#endif
Use llvm::computeLTOCacheKey to determine post-ThinLTO CGU reuse During incremental ThinLTO compilation, we attempt to re-use the optimized (post-ThinLTO) bitcode file for a module if it is 'safe' to do so. Up until now, 'safe' has meant that the set of modules that our current modules imports from/exports to is unchanged from the previous compilation session. See PR #67020 and PR #71131 for more details. However, this turns out be insufficient to guarantee that it's safe to reuse the post-LTO module (i.e. that optimizing the pre-LTO module would produce the same result). When LLVM optimizes a module during ThinLTO, it may look at other information from the 'module index', such as whether a (non-imported!) global variable is used. If this information changes between compilation runs, we may end up re-using an optimized module that (for example) had dead-code elimination run on a function that is now used by another module. Fortunately, LLVM implements its own ThinLTO module cache, which is used when ThinLTO is performed by a linker plugin (e.g. when clang is used to compile a C proect). Using this cache directly would require extensive refactoring of our code - but fortunately for us, LLVM provides a function that does exactly what we need. The function `llvm::computeLTOCacheKey` is used to compute a SHA-1 hash from all data that might influence the result of ThinLTO on a module. In addition to the module imports/exports that we manually track, it also hashes information about global variables (e.g. their liveness) which might be used during optimization. By using this function, we shouldn't have to worry about new LLVM passes breaking our module re-use behavior. In LLVM, the output of this function forms part of the filename used to store the post-ThinLTO module. To keep our current filename structure intact, this PR just writes out the mapping 'CGU name -> Hash' to a file. To determine if a post-LTO module should be reused, we compare hashes from the previous session. This should unblock PR #75199 - by sheer chance, it seems to have hit this issue due to the particular CGU partitioning and optimization decisions that end up getting made.
2020-09-17 16:36:13 -05:00
StringMap<std::map<GlobalValue::GUID, GlobalValue::LinkageTypes>> ResolvedODR;
LLVMRustThinLTOData() : Index(/* HaveGVs = */ false) {}
rustc: Implement ThinLTO This commit is an implementation of LLVM's ThinLTO for consumption in rustc itself. Currently today LTO works by merging all relevant LLVM modules into one and then running optimization passes. "Thin" LTO operates differently by having more sharded work and allowing parallelism opportunities between optimizing codegen units. Further down the road Thin LTO also allows *incremental* LTO which should enable even faster release builds without compromising on the performance we have today. This commit uses a `-Z thinlto` flag to gate whether ThinLTO is enabled. It then also implements two forms of ThinLTO: * In one mode we'll *only* perform ThinLTO over the codegen units produced in a single compilation. That is, we won't load upstream rlibs, but we'll instead just perform ThinLTO amongst all codegen units produced by the compiler for the local crate. This is intended to emulate a desired end point where we have codegen units turned on by default for all crates and ThinLTO allows us to do this without performance loss. * In anther mode, like full LTO today, we'll optimize all upstream dependencies in "thin" mode. Unlike today, however, this LTO step is fully parallelized so should finish much more quickly. There's a good bit of comments about what the implementation is doing and where it came from, but the tl;dr; is that currently most of the support here is copied from upstream LLVM. This code duplication is done for a number of reasons: * Controlling parallelism means we can use the existing jobserver support to avoid overloading machines. * We will likely want a slightly different form of incremental caching which integrates with our own incremental strategy, but this is yet to be determined. * This buys us some flexibility about when/where we run ThinLTO, as well as having it tailored to fit our needs for the time being. * Finally this allows us to reuse some artifacts such as our `TargetMachine` creation, where all our options we used today aren't necessarily supported by upstream LLVM yet. My hope is that we can get some experience with this copy/paste in tree and then eventually upstream some work to LLVM itself to avoid the duplication while still ensuring our needs are met. Otherwise I fear that maintaining these bindings may be quite costly over the years with LLVM updates!
2017-07-23 10:14:38 -05:00
};
// Just an argument to the `LLVMRustCreateThinLTOData` function below.
struct LLVMRustThinLTOModule {
const char *identifier;
const char *data;
size_t len;
};
// This is copied from `lib/LTO/ThinLTOCodeGenerator.cpp`, not sure what it
// does.
static const GlobalValueSummary *
getFirstDefinitionForLinker(const GlobalValueSummaryList &GVSummaryList) {
auto StrongDefForLinker = llvm::find_if(
GVSummaryList, [](const std::unique_ptr<GlobalValueSummary> &Summary) {
auto Linkage = Summary->linkage();
return !GlobalValue::isAvailableExternallyLinkage(Linkage) &&
!GlobalValue::isWeakForLinker(Linkage);
});
if (StrongDefForLinker != GVSummaryList.end())
return StrongDefForLinker->get();
auto FirstDefForLinker = llvm::find_if(
GVSummaryList, [](const std::unique_ptr<GlobalValueSummary> &Summary) {
auto Linkage = Summary->linkage();
return !GlobalValue::isAvailableExternallyLinkage(Linkage);
});
if (FirstDefForLinker == GVSummaryList.end())
return nullptr;
return FirstDefForLinker->get();
}
// The main entry point for creating the global ThinLTO analysis. The structure
// here is basically the same as before threads are spawned in the `run`
// function of `lib/LTO/ThinLTOCodeGenerator.cpp`.
extern "C" LLVMRustThinLTOData*
LLVMRustCreateThinLTOData(LLVMRustThinLTOModule *modules,
int num_modules,
const char **preserved_symbols,
int num_symbols) {
2019-12-31 07:08:25 -06:00
auto Ret = std::make_unique<LLVMRustThinLTOData>();
rustc: Implement ThinLTO This commit is an implementation of LLVM's ThinLTO for consumption in rustc itself. Currently today LTO works by merging all relevant LLVM modules into one and then running optimization passes. "Thin" LTO operates differently by having more sharded work and allowing parallelism opportunities between optimizing codegen units. Further down the road Thin LTO also allows *incremental* LTO which should enable even faster release builds without compromising on the performance we have today. This commit uses a `-Z thinlto` flag to gate whether ThinLTO is enabled. It then also implements two forms of ThinLTO: * In one mode we'll *only* perform ThinLTO over the codegen units produced in a single compilation. That is, we won't load upstream rlibs, but we'll instead just perform ThinLTO amongst all codegen units produced by the compiler for the local crate. This is intended to emulate a desired end point where we have codegen units turned on by default for all crates and ThinLTO allows us to do this without performance loss. * In anther mode, like full LTO today, we'll optimize all upstream dependencies in "thin" mode. Unlike today, however, this LTO step is fully parallelized so should finish much more quickly. There's a good bit of comments about what the implementation is doing and where it came from, but the tl;dr; is that currently most of the support here is copied from upstream LLVM. This code duplication is done for a number of reasons: * Controlling parallelism means we can use the existing jobserver support to avoid overloading machines. * We will likely want a slightly different form of incremental caching which integrates with our own incremental strategy, but this is yet to be determined. * This buys us some flexibility about when/where we run ThinLTO, as well as having it tailored to fit our needs for the time being. * Finally this allows us to reuse some artifacts such as our `TargetMachine` creation, where all our options we used today aren't necessarily supported by upstream LLVM yet. My hope is that we can get some experience with this copy/paste in tree and then eventually upstream some work to LLVM itself to avoid the duplication while still ensuring our needs are met. Otherwise I fear that maintaining these bindings may be quite costly over the years with LLVM updates!
2017-07-23 10:14:38 -05:00
// Load each module's summary and merge it into one combined index
for (int i = 0; i < num_modules; i++) {
auto module = &modules[i];
StringRef buffer(module->data, module->len);
MemoryBufferRef mem_buffer(buffer, module->identifier);
Ret->ModuleMap[module->identifier] = mem_buffer;
#if LLVM_VERSION_GE(18, 0)
if (Error Err = readModuleSummaryIndex(mem_buffer, Ret->Index)) {
#else
2017-10-10 14:29:14 -05:00
if (Error Err = readModuleSummaryIndex(mem_buffer, Ret->Index, i)) {
#endif
2017-10-10 14:29:14 -05:00
LLVMRustSetLastError(toString(std::move(Err)).c_str());
return nullptr;
}
rustc: Implement ThinLTO This commit is an implementation of LLVM's ThinLTO for consumption in rustc itself. Currently today LTO works by merging all relevant LLVM modules into one and then running optimization passes. "Thin" LTO operates differently by having more sharded work and allowing parallelism opportunities between optimizing codegen units. Further down the road Thin LTO also allows *incremental* LTO which should enable even faster release builds without compromising on the performance we have today. This commit uses a `-Z thinlto` flag to gate whether ThinLTO is enabled. It then also implements two forms of ThinLTO: * In one mode we'll *only* perform ThinLTO over the codegen units produced in a single compilation. That is, we won't load upstream rlibs, but we'll instead just perform ThinLTO amongst all codegen units produced by the compiler for the local crate. This is intended to emulate a desired end point where we have codegen units turned on by default for all crates and ThinLTO allows us to do this without performance loss. * In anther mode, like full LTO today, we'll optimize all upstream dependencies in "thin" mode. Unlike today, however, this LTO step is fully parallelized so should finish much more quickly. There's a good bit of comments about what the implementation is doing and where it came from, but the tl;dr; is that currently most of the support here is copied from upstream LLVM. This code duplication is done for a number of reasons: * Controlling parallelism means we can use the existing jobserver support to avoid overloading machines. * We will likely want a slightly different form of incremental caching which integrates with our own incremental strategy, but this is yet to be determined. * This buys us some flexibility about when/where we run ThinLTO, as well as having it tailored to fit our needs for the time being. * Finally this allows us to reuse some artifacts such as our `TargetMachine` creation, where all our options we used today aren't necessarily supported by upstream LLVM yet. My hope is that we can get some experience with this copy/paste in tree and then eventually upstream some work to LLVM itself to avoid the duplication while still ensuring our needs are met. Otherwise I fear that maintaining these bindings may be quite costly over the years with LLVM updates!
2017-07-23 10:14:38 -05:00
}
// Collect for each module the list of function it defines (GUID -> Summary)
Ret->Index.collectDefinedGVSummariesPerModule(Ret->ModuleToDefinedGVSummaries);
// Convert the preserved symbols set from string to GUID, this is then needed
// for internalization.
rustc: Implement ThinLTO This commit is an implementation of LLVM's ThinLTO for consumption in rustc itself. Currently today LTO works by merging all relevant LLVM modules into one and then running optimization passes. "Thin" LTO operates differently by having more sharded work and allowing parallelism opportunities between optimizing codegen units. Further down the road Thin LTO also allows *incremental* LTO which should enable even faster release builds without compromising on the performance we have today. This commit uses a `-Z thinlto` flag to gate whether ThinLTO is enabled. It then also implements two forms of ThinLTO: * In one mode we'll *only* perform ThinLTO over the codegen units produced in a single compilation. That is, we won't load upstream rlibs, but we'll instead just perform ThinLTO amongst all codegen units produced by the compiler for the local crate. This is intended to emulate a desired end point where we have codegen units turned on by default for all crates and ThinLTO allows us to do this without performance loss. * In anther mode, like full LTO today, we'll optimize all upstream dependencies in "thin" mode. Unlike today, however, this LTO step is fully parallelized so should finish much more quickly. There's a good bit of comments about what the implementation is doing and where it came from, but the tl;dr; is that currently most of the support here is copied from upstream LLVM. This code duplication is done for a number of reasons: * Controlling parallelism means we can use the existing jobserver support to avoid overloading machines. * We will likely want a slightly different form of incremental caching which integrates with our own incremental strategy, but this is yet to be determined. * This buys us some flexibility about when/where we run ThinLTO, as well as having it tailored to fit our needs for the time being. * Finally this allows us to reuse some artifacts such as our `TargetMachine` creation, where all our options we used today aren't necessarily supported by upstream LLVM yet. My hope is that we can get some experience with this copy/paste in tree and then eventually upstream some work to LLVM itself to avoid the duplication while still ensuring our needs are met. Otherwise I fear that maintaining these bindings may be quite costly over the years with LLVM updates!
2017-07-23 10:14:38 -05:00
for (int i = 0; i < num_symbols; i++) {
auto GUID = GlobalValue::getGUID(preserved_symbols[i]);
Ret->GUIDPreservedSymbols.insert(GUID);
rustc: Implement ThinLTO This commit is an implementation of LLVM's ThinLTO for consumption in rustc itself. Currently today LTO works by merging all relevant LLVM modules into one and then running optimization passes. "Thin" LTO operates differently by having more sharded work and allowing parallelism opportunities between optimizing codegen units. Further down the road Thin LTO also allows *incremental* LTO which should enable even faster release builds without compromising on the performance we have today. This commit uses a `-Z thinlto` flag to gate whether ThinLTO is enabled. It then also implements two forms of ThinLTO: * In one mode we'll *only* perform ThinLTO over the codegen units produced in a single compilation. That is, we won't load upstream rlibs, but we'll instead just perform ThinLTO amongst all codegen units produced by the compiler for the local crate. This is intended to emulate a desired end point where we have codegen units turned on by default for all crates and ThinLTO allows us to do this without performance loss. * In anther mode, like full LTO today, we'll optimize all upstream dependencies in "thin" mode. Unlike today, however, this LTO step is fully parallelized so should finish much more quickly. There's a good bit of comments about what the implementation is doing and where it came from, but the tl;dr; is that currently most of the support here is copied from upstream LLVM. This code duplication is done for a number of reasons: * Controlling parallelism means we can use the existing jobserver support to avoid overloading machines. * We will likely want a slightly different form of incremental caching which integrates with our own incremental strategy, but this is yet to be determined. * This buys us some flexibility about when/where we run ThinLTO, as well as having it tailored to fit our needs for the time being. * Finally this allows us to reuse some artifacts such as our `TargetMachine` creation, where all our options we used today aren't necessarily supported by upstream LLVM yet. My hope is that we can get some experience with this copy/paste in tree and then eventually upstream some work to LLVM itself to avoid the duplication while still ensuring our needs are met. Otherwise I fear that maintaining these bindings may be quite costly over the years with LLVM updates!
2017-07-23 10:14:38 -05:00
}
// Collect the import/export lists for all modules from the call-graph in the
// combined index
//
// This is copied from `lib/LTO/ThinLTOCodeGenerator.cpp`
auto deadIsPrevailing = [&](GlobalValue::GUID G) {
return PrevailingType::Unknown;
};
// We don't have a complete picture in our use of ThinLTO, just our immediate
// crate, so we need `ImportEnabled = false` to limit internalization.
// Otherwise, we sometimes lose `static` values -- see #60184.
computeDeadSymbolsWithConstProp(Ret->Index, Ret->GUIDPreservedSymbols,
deadIsPrevailing, /* ImportEnabled = */ false);
rustc: Implement ThinLTO This commit is an implementation of LLVM's ThinLTO for consumption in rustc itself. Currently today LTO works by merging all relevant LLVM modules into one and then running optimization passes. "Thin" LTO operates differently by having more sharded work and allowing parallelism opportunities between optimizing codegen units. Further down the road Thin LTO also allows *incremental* LTO which should enable even faster release builds without compromising on the performance we have today. This commit uses a `-Z thinlto` flag to gate whether ThinLTO is enabled. It then also implements two forms of ThinLTO: * In one mode we'll *only* perform ThinLTO over the codegen units produced in a single compilation. That is, we won't load upstream rlibs, but we'll instead just perform ThinLTO amongst all codegen units produced by the compiler for the local crate. This is intended to emulate a desired end point where we have codegen units turned on by default for all crates and ThinLTO allows us to do this without performance loss. * In anther mode, like full LTO today, we'll optimize all upstream dependencies in "thin" mode. Unlike today, however, this LTO step is fully parallelized so should finish much more quickly. There's a good bit of comments about what the implementation is doing and where it came from, but the tl;dr; is that currently most of the support here is copied from upstream LLVM. This code duplication is done for a number of reasons: * Controlling parallelism means we can use the existing jobserver support to avoid overloading machines. * We will likely want a slightly different form of incremental caching which integrates with our own incremental strategy, but this is yet to be determined. * This buys us some flexibility about when/where we run ThinLTO, as well as having it tailored to fit our needs for the time being. * Finally this allows us to reuse some artifacts such as our `TargetMachine` creation, where all our options we used today aren't necessarily supported by upstream LLVM yet. My hope is that we can get some experience with this copy/paste in tree and then eventually upstream some work to LLVM itself to avoid the duplication while still ensuring our needs are met. Otherwise I fear that maintaining these bindings may be quite costly over the years with LLVM updates!
2017-07-23 10:14:38 -05:00
// Resolve LinkOnce/Weak symbols, this has to be computed early be cause it
// impacts the caching.
//
// This is copied from `lib/LTO/ThinLTOCodeGenerator.cpp` with some of this
// being lifted from `lib/LTO/LTO.cpp` as well
rustc: Implement ThinLTO This commit is an implementation of LLVM's ThinLTO for consumption in rustc itself. Currently today LTO works by merging all relevant LLVM modules into one and then running optimization passes. "Thin" LTO operates differently by having more sharded work and allowing parallelism opportunities between optimizing codegen units. Further down the road Thin LTO also allows *incremental* LTO which should enable even faster release builds without compromising on the performance we have today. This commit uses a `-Z thinlto` flag to gate whether ThinLTO is enabled. It then also implements two forms of ThinLTO: * In one mode we'll *only* perform ThinLTO over the codegen units produced in a single compilation. That is, we won't load upstream rlibs, but we'll instead just perform ThinLTO amongst all codegen units produced by the compiler for the local crate. This is intended to emulate a desired end point where we have codegen units turned on by default for all crates and ThinLTO allows us to do this without performance loss. * In anther mode, like full LTO today, we'll optimize all upstream dependencies in "thin" mode. Unlike today, however, this LTO step is fully parallelized so should finish much more quickly. There's a good bit of comments about what the implementation is doing and where it came from, but the tl;dr; is that currently most of the support here is copied from upstream LLVM. This code duplication is done for a number of reasons: * Controlling parallelism means we can use the existing jobserver support to avoid overloading machines. * We will likely want a slightly different form of incremental caching which integrates with our own incremental strategy, but this is yet to be determined. * This buys us some flexibility about when/where we run ThinLTO, as well as having it tailored to fit our needs for the time being. * Finally this allows us to reuse some artifacts such as our `TargetMachine` creation, where all our options we used today aren't necessarily supported by upstream LLVM yet. My hope is that we can get some experience with this copy/paste in tree and then eventually upstream some work to LLVM itself to avoid the duplication while still ensuring our needs are met. Otherwise I fear that maintaining these bindings may be quite costly over the years with LLVM updates!
2017-07-23 10:14:38 -05:00
DenseMap<GlobalValue::GUID, const GlobalValueSummary *> PrevailingCopy;
for (auto &I : Ret->Index) {
2017-10-10 14:29:14 -05:00
if (I.second.SummaryList.size() > 1)
PrevailingCopy[I.first] = getFirstDefinitionForLinker(I.second.SummaryList);
rustc: Implement ThinLTO This commit is an implementation of LLVM's ThinLTO for consumption in rustc itself. Currently today LTO works by merging all relevant LLVM modules into one and then running optimization passes. "Thin" LTO operates differently by having more sharded work and allowing parallelism opportunities between optimizing codegen units. Further down the road Thin LTO also allows *incremental* LTO which should enable even faster release builds without compromising on the performance we have today. This commit uses a `-Z thinlto` flag to gate whether ThinLTO is enabled. It then also implements two forms of ThinLTO: * In one mode we'll *only* perform ThinLTO over the codegen units produced in a single compilation. That is, we won't load upstream rlibs, but we'll instead just perform ThinLTO amongst all codegen units produced by the compiler for the local crate. This is intended to emulate a desired end point where we have codegen units turned on by default for all crates and ThinLTO allows us to do this without performance loss. * In anther mode, like full LTO today, we'll optimize all upstream dependencies in "thin" mode. Unlike today, however, this LTO step is fully parallelized so should finish much more quickly. There's a good bit of comments about what the implementation is doing and where it came from, but the tl;dr; is that currently most of the support here is copied from upstream LLVM. This code duplication is done for a number of reasons: * Controlling parallelism means we can use the existing jobserver support to avoid overloading machines. * We will likely want a slightly different form of incremental caching which integrates with our own incremental strategy, but this is yet to be determined. * This buys us some flexibility about when/where we run ThinLTO, as well as having it tailored to fit our needs for the time being. * Finally this allows us to reuse some artifacts such as our `TargetMachine` creation, where all our options we used today aren't necessarily supported by upstream LLVM yet. My hope is that we can get some experience with this copy/paste in tree and then eventually upstream some work to LLVM itself to avoid the duplication while still ensuring our needs are met. Otherwise I fear that maintaining these bindings may be quite costly over the years with LLVM updates!
2017-07-23 10:14:38 -05:00
}
auto isPrevailing = [&](GlobalValue::GUID GUID, const GlobalValueSummary *S) {
const auto &Prevailing = PrevailingCopy.find(GUID);
if (Prevailing == PrevailingCopy.end())
return true;
return Prevailing->second == S;
};
ComputeCrossModuleImport(
Ret->Index,
Ret->ModuleToDefinedGVSummaries,
#if LLVM_VERSION_GE(17, 0)
isPrevailing,
#endif
Ret->ImportLists,
Ret->ExportLists
);
rustc: Implement ThinLTO This commit is an implementation of LLVM's ThinLTO for consumption in rustc itself. Currently today LTO works by merging all relevant LLVM modules into one and then running optimization passes. "Thin" LTO operates differently by having more sharded work and allowing parallelism opportunities between optimizing codegen units. Further down the road Thin LTO also allows *incremental* LTO which should enable even faster release builds without compromising on the performance we have today. This commit uses a `-Z thinlto` flag to gate whether ThinLTO is enabled. It then also implements two forms of ThinLTO: * In one mode we'll *only* perform ThinLTO over the codegen units produced in a single compilation. That is, we won't load upstream rlibs, but we'll instead just perform ThinLTO amongst all codegen units produced by the compiler for the local crate. This is intended to emulate a desired end point where we have codegen units turned on by default for all crates and ThinLTO allows us to do this without performance loss. * In anther mode, like full LTO today, we'll optimize all upstream dependencies in "thin" mode. Unlike today, however, this LTO step is fully parallelized so should finish much more quickly. There's a good bit of comments about what the implementation is doing and where it came from, but the tl;dr; is that currently most of the support here is copied from upstream LLVM. This code duplication is done for a number of reasons: * Controlling parallelism means we can use the existing jobserver support to avoid overloading machines. * We will likely want a slightly different form of incremental caching which integrates with our own incremental strategy, but this is yet to be determined. * This buys us some flexibility about when/where we run ThinLTO, as well as having it tailored to fit our needs for the time being. * Finally this allows us to reuse some artifacts such as our `TargetMachine` creation, where all our options we used today aren't necessarily supported by upstream LLVM yet. My hope is that we can get some experience with this copy/paste in tree and then eventually upstream some work to LLVM itself to avoid the duplication while still ensuring our needs are met. Otherwise I fear that maintaining these bindings may be quite costly over the years with LLVM updates!
2017-07-23 10:14:38 -05:00
auto recordNewLinkage = [&](StringRef ModuleIdentifier,
GlobalValue::GUID GUID,
GlobalValue::LinkageTypes NewLinkage) {
Use llvm::computeLTOCacheKey to determine post-ThinLTO CGU reuse During incremental ThinLTO compilation, we attempt to re-use the optimized (post-ThinLTO) bitcode file for a module if it is 'safe' to do so. Up until now, 'safe' has meant that the set of modules that our current modules imports from/exports to is unchanged from the previous compilation session. See PR #67020 and PR #71131 for more details. However, this turns out be insufficient to guarantee that it's safe to reuse the post-LTO module (i.e. that optimizing the pre-LTO module would produce the same result). When LLVM optimizes a module during ThinLTO, it may look at other information from the 'module index', such as whether a (non-imported!) global variable is used. If this information changes between compilation runs, we may end up re-using an optimized module that (for example) had dead-code elimination run on a function that is now used by another module. Fortunately, LLVM implements its own ThinLTO module cache, which is used when ThinLTO is performed by a linker plugin (e.g. when clang is used to compile a C proect). Using this cache directly would require extensive refactoring of our code - but fortunately for us, LLVM provides a function that does exactly what we need. The function `llvm::computeLTOCacheKey` is used to compute a SHA-1 hash from all data that might influence the result of ThinLTO on a module. In addition to the module imports/exports that we manually track, it also hashes information about global variables (e.g. their liveness) which might be used during optimization. By using this function, we shouldn't have to worry about new LLVM passes breaking our module re-use behavior. In LLVM, the output of this function forms part of the filename used to store the post-ThinLTO module. To keep our current filename structure intact, this PR just writes out the mapping 'CGU name -> Hash' to a file. To determine if a post-LTO module should be reused, we compare hashes from the previous session. This should unblock PR #75199 - by sheer chance, it seems to have hit this issue due to the particular CGU partitioning and optimization decisions that end up getting made.
2020-09-17 16:36:13 -05:00
Ret->ResolvedODR[ModuleIdentifier][GUID] = NewLinkage;
rustc: Implement ThinLTO This commit is an implementation of LLVM's ThinLTO for consumption in rustc itself. Currently today LTO works by merging all relevant LLVM modules into one and then running optimization passes. "Thin" LTO operates differently by having more sharded work and allowing parallelism opportunities between optimizing codegen units. Further down the road Thin LTO also allows *incremental* LTO which should enable even faster release builds without compromising on the performance we have today. This commit uses a `-Z thinlto` flag to gate whether ThinLTO is enabled. It then also implements two forms of ThinLTO: * In one mode we'll *only* perform ThinLTO over the codegen units produced in a single compilation. That is, we won't load upstream rlibs, but we'll instead just perform ThinLTO amongst all codegen units produced by the compiler for the local crate. This is intended to emulate a desired end point where we have codegen units turned on by default for all crates and ThinLTO allows us to do this without performance loss. * In anther mode, like full LTO today, we'll optimize all upstream dependencies in "thin" mode. Unlike today, however, this LTO step is fully parallelized so should finish much more quickly. There's a good bit of comments about what the implementation is doing and where it came from, but the tl;dr; is that currently most of the support here is copied from upstream LLVM. This code duplication is done for a number of reasons: * Controlling parallelism means we can use the existing jobserver support to avoid overloading machines. * We will likely want a slightly different form of incremental caching which integrates with our own incremental strategy, but this is yet to be determined. * This buys us some flexibility about when/where we run ThinLTO, as well as having it tailored to fit our needs for the time being. * Finally this allows us to reuse some artifacts such as our `TargetMachine` creation, where all our options we used today aren't necessarily supported by upstream LLVM yet. My hope is that we can get some experience with this copy/paste in tree and then eventually upstream some work to LLVM itself to avoid the duplication while still ensuring our needs are met. Otherwise I fear that maintaining these bindings may be quite costly over the years with LLVM updates!
2017-07-23 10:14:38 -05:00
};
// Uses FromPrevailing visibility scheme which works for many binary
// formats. We probably could and should use ELF visibility scheme for many of
// our targets, however.
lto::Config conf;
thinLTOResolvePrevailingInIndex(conf, Ret->Index, isPrevailing, recordNewLinkage,
Ret->GUIDPreservedSymbols);
2022-08-12 12:22:38 -05:00
// Here we calculate an `ExportedGUIDs` set for use in the `isExported`
// callback below. This callback below will dictate the linkage for all
// summaries in the index, and we basically just only want to ensure that dead
// symbols are internalized. Otherwise everything that's already external
// linkage will stay as external, and internal will stay as internal.
std::set<GlobalValue::GUID> ExportedGUIDs;
for (auto &List : Ret->Index) {
for (auto &GVS: List.second.SummaryList) {
if (GlobalValue::isLocalLinkage(GVS->linkage()))
continue;
auto GUID = GVS->getOriginalName();
if (GVS->flags().Live)
ExportedGUIDs.insert(GUID);
}
}
auto isExported = [&](StringRef ModuleIdentifier, ValueInfo VI) {
const auto &ExportList = Ret->ExportLists.find(ModuleIdentifier);
return (ExportList != Ret->ExportLists.end() &&
ExportList->second.count(VI)) ||
ExportedGUIDs.count(VI.getGUID());
};
thinLTOInternalizeAndPromoteInIndex(Ret->Index, isExported, isPrevailing);
rustc: Implement ThinLTO This commit is an implementation of LLVM's ThinLTO for consumption in rustc itself. Currently today LTO works by merging all relevant LLVM modules into one and then running optimization passes. "Thin" LTO operates differently by having more sharded work and allowing parallelism opportunities between optimizing codegen units. Further down the road Thin LTO also allows *incremental* LTO which should enable even faster release builds without compromising on the performance we have today. This commit uses a `-Z thinlto` flag to gate whether ThinLTO is enabled. It then also implements two forms of ThinLTO: * In one mode we'll *only* perform ThinLTO over the codegen units produced in a single compilation. That is, we won't load upstream rlibs, but we'll instead just perform ThinLTO amongst all codegen units produced by the compiler for the local crate. This is intended to emulate a desired end point where we have codegen units turned on by default for all crates and ThinLTO allows us to do this without performance loss. * In anther mode, like full LTO today, we'll optimize all upstream dependencies in "thin" mode. Unlike today, however, this LTO step is fully parallelized so should finish much more quickly. There's a good bit of comments about what the implementation is doing and where it came from, but the tl;dr; is that currently most of the support here is copied from upstream LLVM. This code duplication is done for a number of reasons: * Controlling parallelism means we can use the existing jobserver support to avoid overloading machines. * We will likely want a slightly different form of incremental caching which integrates with our own incremental strategy, but this is yet to be determined. * This buys us some flexibility about when/where we run ThinLTO, as well as having it tailored to fit our needs for the time being. * Finally this allows us to reuse some artifacts such as our `TargetMachine` creation, where all our options we used today aren't necessarily supported by upstream LLVM yet. My hope is that we can get some experience with this copy/paste in tree and then eventually upstream some work to LLVM itself to avoid the duplication while still ensuring our needs are met. Otherwise I fear that maintaining these bindings may be quite costly over the years with LLVM updates!
2017-07-23 10:14:38 -05:00
return Ret.release();
}
extern "C" void
LLVMRustFreeThinLTOData(LLVMRustThinLTOData *Data) {
delete Data;
}
// Below are the various passes that happen *per module* when doing ThinLTO.
//
// In other words, these are the functions that are all run concurrently
// with one another, one per module. The passes here correspond to the analysis
// passes in `lib/LTO/ThinLTOCodeGenerator.cpp`, currently found in the
// `ProcessThinLTOModule` function. Here they're split up into separate steps
// so rustc can save off the intermediate bytecode between each step.
2020-06-25 20:52:41 -05:00
static bool
clearDSOLocalOnDeclarations(Module &Mod, TargetMachine &TM) {
// When linking an ELF shared object, dso_local should be dropped. We
// conservatively do this for -fpic.
bool ClearDSOLocalOnDeclarations =
TM.getTargetTriple().isOSBinFormatELF() &&
TM.getRelocationModel() != Reloc::Static &&
Mod.getPIELevel() == PIELevel::Default;
return ClearDSOLocalOnDeclarations;
}
rustc: Implement ThinLTO This commit is an implementation of LLVM's ThinLTO for consumption in rustc itself. Currently today LTO works by merging all relevant LLVM modules into one and then running optimization passes. "Thin" LTO operates differently by having more sharded work and allowing parallelism opportunities between optimizing codegen units. Further down the road Thin LTO also allows *incremental* LTO which should enable even faster release builds without compromising on the performance we have today. This commit uses a `-Z thinlto` flag to gate whether ThinLTO is enabled. It then also implements two forms of ThinLTO: * In one mode we'll *only* perform ThinLTO over the codegen units produced in a single compilation. That is, we won't load upstream rlibs, but we'll instead just perform ThinLTO amongst all codegen units produced by the compiler for the local crate. This is intended to emulate a desired end point where we have codegen units turned on by default for all crates and ThinLTO allows us to do this without performance loss. * In anther mode, like full LTO today, we'll optimize all upstream dependencies in "thin" mode. Unlike today, however, this LTO step is fully parallelized so should finish much more quickly. There's a good bit of comments about what the implementation is doing and where it came from, but the tl;dr; is that currently most of the support here is copied from upstream LLVM. This code duplication is done for a number of reasons: * Controlling parallelism means we can use the existing jobserver support to avoid overloading machines. * We will likely want a slightly different form of incremental caching which integrates with our own incremental strategy, but this is yet to be determined. * This buys us some flexibility about when/where we run ThinLTO, as well as having it tailored to fit our needs for the time being. * Finally this allows us to reuse some artifacts such as our `TargetMachine` creation, where all our options we used today aren't necessarily supported by upstream LLVM yet. My hope is that we can get some experience with this copy/paste in tree and then eventually upstream some work to LLVM itself to avoid the duplication while still ensuring our needs are met. Otherwise I fear that maintaining these bindings may be quite costly over the years with LLVM updates!
2017-07-23 10:14:38 -05:00
extern "C" bool
2020-06-25 20:52:41 -05:00
LLVMRustPrepareThinLTORename(const LLVMRustThinLTOData *Data, LLVMModuleRef M,
LLVMTargetMachineRef TM) {
rustc: Implement ThinLTO This commit is an implementation of LLVM's ThinLTO for consumption in rustc itself. Currently today LTO works by merging all relevant LLVM modules into one and then running optimization passes. "Thin" LTO operates differently by having more sharded work and allowing parallelism opportunities between optimizing codegen units. Further down the road Thin LTO also allows *incremental* LTO which should enable even faster release builds without compromising on the performance we have today. This commit uses a `-Z thinlto` flag to gate whether ThinLTO is enabled. It then also implements two forms of ThinLTO: * In one mode we'll *only* perform ThinLTO over the codegen units produced in a single compilation. That is, we won't load upstream rlibs, but we'll instead just perform ThinLTO amongst all codegen units produced by the compiler for the local crate. This is intended to emulate a desired end point where we have codegen units turned on by default for all crates and ThinLTO allows us to do this without performance loss. * In anther mode, like full LTO today, we'll optimize all upstream dependencies in "thin" mode. Unlike today, however, this LTO step is fully parallelized so should finish much more quickly. There's a good bit of comments about what the implementation is doing and where it came from, but the tl;dr; is that currently most of the support here is copied from upstream LLVM. This code duplication is done for a number of reasons: * Controlling parallelism means we can use the existing jobserver support to avoid overloading machines. * We will likely want a slightly different form of incremental caching which integrates with our own incremental strategy, but this is yet to be determined. * This buys us some flexibility about when/where we run ThinLTO, as well as having it tailored to fit our needs for the time being. * Finally this allows us to reuse some artifacts such as our `TargetMachine` creation, where all our options we used today aren't necessarily supported by upstream LLVM yet. My hope is that we can get some experience with this copy/paste in tree and then eventually upstream some work to LLVM itself to avoid the duplication while still ensuring our needs are met. Otherwise I fear that maintaining these bindings may be quite costly over the years with LLVM updates!
2017-07-23 10:14:38 -05:00
Module &Mod = *unwrap(M);
2020-06-25 20:52:41 -05:00
TargetMachine &Target = *unwrap(TM);
bool ClearDSOLocal = clearDSOLocalOnDeclarations(Mod, Target);
bool error = renameModuleForThinLTO(Mod, Data->Index, ClearDSOLocal);
if (error) {
rustc: Implement ThinLTO This commit is an implementation of LLVM's ThinLTO for consumption in rustc itself. Currently today LTO works by merging all relevant LLVM modules into one and then running optimization passes. "Thin" LTO operates differently by having more sharded work and allowing parallelism opportunities between optimizing codegen units. Further down the road Thin LTO also allows *incremental* LTO which should enable even faster release builds without compromising on the performance we have today. This commit uses a `-Z thinlto` flag to gate whether ThinLTO is enabled. It then also implements two forms of ThinLTO: * In one mode we'll *only* perform ThinLTO over the codegen units produced in a single compilation. That is, we won't load upstream rlibs, but we'll instead just perform ThinLTO amongst all codegen units produced by the compiler for the local crate. This is intended to emulate a desired end point where we have codegen units turned on by default for all crates and ThinLTO allows us to do this without performance loss. * In anther mode, like full LTO today, we'll optimize all upstream dependencies in "thin" mode. Unlike today, however, this LTO step is fully parallelized so should finish much more quickly. There's a good bit of comments about what the implementation is doing and where it came from, but the tl;dr; is that currently most of the support here is copied from upstream LLVM. This code duplication is done for a number of reasons: * Controlling parallelism means we can use the existing jobserver support to avoid overloading machines. * We will likely want a slightly different form of incremental caching which integrates with our own incremental strategy, but this is yet to be determined. * This buys us some flexibility about when/where we run ThinLTO, as well as having it tailored to fit our needs for the time being. * Finally this allows us to reuse some artifacts such as our `TargetMachine` creation, where all our options we used today aren't necessarily supported by upstream LLVM yet. My hope is that we can get some experience with this copy/paste in tree and then eventually upstream some work to LLVM itself to avoid the duplication while still ensuring our needs are met. Otherwise I fear that maintaining these bindings may be quite costly over the years with LLVM updates!
2017-07-23 10:14:38 -05:00
LLVMRustSetLastError("renameModuleForThinLTO failed");
return false;
}
return true;
}
extern "C" bool
LLVMRustPrepareThinLTOResolveWeak(const LLVMRustThinLTOData *Data, LLVMModuleRef M) {
Module &Mod = *unwrap(M);
const auto &DefinedGlobals = Data->ModuleToDefinedGVSummaries.lookup(Mod.getModuleIdentifier());
thinLTOFinalizeInModule(Mod, DefinedGlobals, /*PropagateAttrs=*/true);
rustc: Implement ThinLTO This commit is an implementation of LLVM's ThinLTO for consumption in rustc itself. Currently today LTO works by merging all relevant LLVM modules into one and then running optimization passes. "Thin" LTO operates differently by having more sharded work and allowing parallelism opportunities between optimizing codegen units. Further down the road Thin LTO also allows *incremental* LTO which should enable even faster release builds without compromising on the performance we have today. This commit uses a `-Z thinlto` flag to gate whether ThinLTO is enabled. It then also implements two forms of ThinLTO: * In one mode we'll *only* perform ThinLTO over the codegen units produced in a single compilation. That is, we won't load upstream rlibs, but we'll instead just perform ThinLTO amongst all codegen units produced by the compiler for the local crate. This is intended to emulate a desired end point where we have codegen units turned on by default for all crates and ThinLTO allows us to do this without performance loss. * In anther mode, like full LTO today, we'll optimize all upstream dependencies in "thin" mode. Unlike today, however, this LTO step is fully parallelized so should finish much more quickly. There's a good bit of comments about what the implementation is doing and where it came from, but the tl;dr; is that currently most of the support here is copied from upstream LLVM. This code duplication is done for a number of reasons: * Controlling parallelism means we can use the existing jobserver support to avoid overloading machines. * We will likely want a slightly different form of incremental caching which integrates with our own incremental strategy, but this is yet to be determined. * This buys us some flexibility about when/where we run ThinLTO, as well as having it tailored to fit our needs for the time being. * Finally this allows us to reuse some artifacts such as our `TargetMachine` creation, where all our options we used today aren't necessarily supported by upstream LLVM yet. My hope is that we can get some experience with this copy/paste in tree and then eventually upstream some work to LLVM itself to avoid the duplication while still ensuring our needs are met. Otherwise I fear that maintaining these bindings may be quite costly over the years with LLVM updates!
2017-07-23 10:14:38 -05:00
return true;
}
extern "C" bool
LLVMRustPrepareThinLTOInternalize(const LLVMRustThinLTOData *Data, LLVMModuleRef M) {
Module &Mod = *unwrap(M);
const auto &DefinedGlobals = Data->ModuleToDefinedGVSummaries.lookup(Mod.getModuleIdentifier());
thinLTOInternalizeModule(Mod, DefinedGlobals);
return true;
}
extern "C" bool
2020-06-25 20:52:41 -05:00
LLVMRustPrepareThinLTOImport(const LLVMRustThinLTOData *Data, LLVMModuleRef M,
LLVMTargetMachineRef TM) {
rustc: Implement ThinLTO This commit is an implementation of LLVM's ThinLTO for consumption in rustc itself. Currently today LTO works by merging all relevant LLVM modules into one and then running optimization passes. "Thin" LTO operates differently by having more sharded work and allowing parallelism opportunities between optimizing codegen units. Further down the road Thin LTO also allows *incremental* LTO which should enable even faster release builds without compromising on the performance we have today. This commit uses a `-Z thinlto` flag to gate whether ThinLTO is enabled. It then also implements two forms of ThinLTO: * In one mode we'll *only* perform ThinLTO over the codegen units produced in a single compilation. That is, we won't load upstream rlibs, but we'll instead just perform ThinLTO amongst all codegen units produced by the compiler for the local crate. This is intended to emulate a desired end point where we have codegen units turned on by default for all crates and ThinLTO allows us to do this without performance loss. * In anther mode, like full LTO today, we'll optimize all upstream dependencies in "thin" mode. Unlike today, however, this LTO step is fully parallelized so should finish much more quickly. There's a good bit of comments about what the implementation is doing and where it came from, but the tl;dr; is that currently most of the support here is copied from upstream LLVM. This code duplication is done for a number of reasons: * Controlling parallelism means we can use the existing jobserver support to avoid overloading machines. * We will likely want a slightly different form of incremental caching which integrates with our own incremental strategy, but this is yet to be determined. * This buys us some flexibility about when/where we run ThinLTO, as well as having it tailored to fit our needs for the time being. * Finally this allows us to reuse some artifacts such as our `TargetMachine` creation, where all our options we used today aren't necessarily supported by upstream LLVM yet. My hope is that we can get some experience with this copy/paste in tree and then eventually upstream some work to LLVM itself to avoid the duplication while still ensuring our needs are met. Otherwise I fear that maintaining these bindings may be quite costly over the years with LLVM updates!
2017-07-23 10:14:38 -05:00
Module &Mod = *unwrap(M);
2020-06-25 20:52:41 -05:00
TargetMachine &Target = *unwrap(TM);
rustc: Implement ThinLTO This commit is an implementation of LLVM's ThinLTO for consumption in rustc itself. Currently today LTO works by merging all relevant LLVM modules into one and then running optimization passes. "Thin" LTO operates differently by having more sharded work and allowing parallelism opportunities between optimizing codegen units. Further down the road Thin LTO also allows *incremental* LTO which should enable even faster release builds without compromising on the performance we have today. This commit uses a `-Z thinlto` flag to gate whether ThinLTO is enabled. It then also implements two forms of ThinLTO: * In one mode we'll *only* perform ThinLTO over the codegen units produced in a single compilation. That is, we won't load upstream rlibs, but we'll instead just perform ThinLTO amongst all codegen units produced by the compiler for the local crate. This is intended to emulate a desired end point where we have codegen units turned on by default for all crates and ThinLTO allows us to do this without performance loss. * In anther mode, like full LTO today, we'll optimize all upstream dependencies in "thin" mode. Unlike today, however, this LTO step is fully parallelized so should finish much more quickly. There's a good bit of comments about what the implementation is doing and where it came from, but the tl;dr; is that currently most of the support here is copied from upstream LLVM. This code duplication is done for a number of reasons: * Controlling parallelism means we can use the existing jobserver support to avoid overloading machines. * We will likely want a slightly different form of incremental caching which integrates with our own incremental strategy, but this is yet to be determined. * This buys us some flexibility about when/where we run ThinLTO, as well as having it tailored to fit our needs for the time being. * Finally this allows us to reuse some artifacts such as our `TargetMachine` creation, where all our options we used today aren't necessarily supported by upstream LLVM yet. My hope is that we can get some experience with this copy/paste in tree and then eventually upstream some work to LLVM itself to avoid the duplication while still ensuring our needs are met. Otherwise I fear that maintaining these bindings may be quite costly over the years with LLVM updates!
2017-07-23 10:14:38 -05:00
const auto &ImportList = Data->ImportLists.lookup(Mod.getModuleIdentifier());
auto Loader = [&](StringRef Identifier) {
const auto &Memory = Data->ModuleMap.lookup(Identifier);
auto &Context = Mod.getContext();
auto MOrErr = getLazyBitcodeModule(Memory, Context, true, true);
if (!MOrErr)
return MOrErr;
// The rest of this closure is a workaround for
// https://bugs.llvm.org/show_bug.cgi?id=38184 where during ThinLTO imports
// we accidentally import wasm custom sections into different modules,
// duplicating them by in the final output artifact.
//
// The issue is worked around here by manually removing the
// `wasm.custom_sections` named metadata node from any imported module. This
// we know isn't used by any optimization pass so there's no need for it to
// be imported.
//
// Note that the metadata is currently lazily loaded, so we materialize it
// here before looking up if there's metadata inside. The `FunctionImporter`
// will immediately materialize metadata anyway after an import, so this
// shouldn't be a perf hit.
if (Error Err = (*MOrErr)->materializeMetadata()) {
Expected<std::unique_ptr<Module>> Ret(std::move(Err));
return Ret;
}
auto *WasmCustomSections = (*MOrErr)->getNamedMetadata("wasm.custom_sections");
if (WasmCustomSections)
WasmCustomSections->eraseFromParent();
Support `.comment` section like GCC/Clang (`!llvm.ident`) Both GCC and Clang write by default a `.comment` section with compiler information: ```txt $ gcc -c -xc /dev/null && readelf -p '.comment' null.o String dump of section '.comment': [ 1] GCC: (GNU) 11.2.0 $ clang -c -xc /dev/null && readelf -p '.comment' null.o String dump of section '.comment': [ 1] clang version 14.0.1 (https://github.com/llvm/llvm-project.git c62053979489ccb002efe411c3af059addcb5d7d) ``` They also implement the `-Qn` flag to avoid doing so: ```txt $ gcc -Qn -c -xc /dev/null && readelf -p '.comment' null.o readelf: Warning: Section '.comment' was not dumped because it does not exist! $ clang -Qn -c -xc /dev/null && readelf -p '.comment' null.o readelf: Warning: Section '.comment' was not dumped because it does not exist! ``` So far, `rustc` only does it for WebAssembly targets and only when debug info is enabled: ```txt $ echo 'fn main(){}' | rustc --target=wasm32-unknown-unknown --emit=llvm-ir -Cdebuginfo=2 - && grep llvm.ident rust_out.ll !llvm.ident = !{!27} ``` In the RFC part of this PR it was decided to always add the information, which gets us closer to other popular compilers. An opt-out flag like GCC and Clang may be added later on if deemed necessary. Implementation-wise, this covers both `ModuleLlvm::new()` and `ModuleLlvm::new_metadata()` cases by moving the addition to `context::create_module` and adds a few test cases. ThinLTO also sees the `llvm.ident` named metadata duplicated (in temporary outputs), so this deduplicates it like it is done for `wasm.custom_sections`. The tests also check this duplication does not take place. Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
2022-05-28 18:10:44 -05:00
// `llvm.ident` named metadata also gets duplicated.
auto *llvmIdent = (*MOrErr)->getNamedMetadata("llvm.ident");
if (llvmIdent)
llvmIdent->eraseFromParent();
return MOrErr;
rustc: Implement ThinLTO This commit is an implementation of LLVM's ThinLTO for consumption in rustc itself. Currently today LTO works by merging all relevant LLVM modules into one and then running optimization passes. "Thin" LTO operates differently by having more sharded work and allowing parallelism opportunities between optimizing codegen units. Further down the road Thin LTO also allows *incremental* LTO which should enable even faster release builds without compromising on the performance we have today. This commit uses a `-Z thinlto` flag to gate whether ThinLTO is enabled. It then also implements two forms of ThinLTO: * In one mode we'll *only* perform ThinLTO over the codegen units produced in a single compilation. That is, we won't load upstream rlibs, but we'll instead just perform ThinLTO amongst all codegen units produced by the compiler for the local crate. This is intended to emulate a desired end point where we have codegen units turned on by default for all crates and ThinLTO allows us to do this without performance loss. * In anther mode, like full LTO today, we'll optimize all upstream dependencies in "thin" mode. Unlike today, however, this LTO step is fully parallelized so should finish much more quickly. There's a good bit of comments about what the implementation is doing and where it came from, but the tl;dr; is that currently most of the support here is copied from upstream LLVM. This code duplication is done for a number of reasons: * Controlling parallelism means we can use the existing jobserver support to avoid overloading machines. * We will likely want a slightly different form of incremental caching which integrates with our own incremental strategy, but this is yet to be determined. * This buys us some flexibility about when/where we run ThinLTO, as well as having it tailored to fit our needs for the time being. * Finally this allows us to reuse some artifacts such as our `TargetMachine` creation, where all our options we used today aren't necessarily supported by upstream LLVM yet. My hope is that we can get some experience with this copy/paste in tree and then eventually upstream some work to LLVM itself to avoid the duplication while still ensuring our needs are met. Otherwise I fear that maintaining these bindings may be quite costly over the years with LLVM updates!
2017-07-23 10:14:38 -05:00
};
2020-06-25 20:52:41 -05:00
bool ClearDSOLocal = clearDSOLocalOnDeclarations(Mod, Target);
FunctionImporter Importer(Data->Index, Loader, ClearDSOLocal);
rustc: Implement ThinLTO This commit is an implementation of LLVM's ThinLTO for consumption in rustc itself. Currently today LTO works by merging all relevant LLVM modules into one and then running optimization passes. "Thin" LTO operates differently by having more sharded work and allowing parallelism opportunities between optimizing codegen units. Further down the road Thin LTO also allows *incremental* LTO which should enable even faster release builds without compromising on the performance we have today. This commit uses a `-Z thinlto` flag to gate whether ThinLTO is enabled. It then also implements two forms of ThinLTO: * In one mode we'll *only* perform ThinLTO over the codegen units produced in a single compilation. That is, we won't load upstream rlibs, but we'll instead just perform ThinLTO amongst all codegen units produced by the compiler for the local crate. This is intended to emulate a desired end point where we have codegen units turned on by default for all crates and ThinLTO allows us to do this without performance loss. * In anther mode, like full LTO today, we'll optimize all upstream dependencies in "thin" mode. Unlike today, however, this LTO step is fully parallelized so should finish much more quickly. There's a good bit of comments about what the implementation is doing and where it came from, but the tl;dr; is that currently most of the support here is copied from upstream LLVM. This code duplication is done for a number of reasons: * Controlling parallelism means we can use the existing jobserver support to avoid overloading machines. * We will likely want a slightly different form of incremental caching which integrates with our own incremental strategy, but this is yet to be determined. * This buys us some flexibility about when/where we run ThinLTO, as well as having it tailored to fit our needs for the time being. * Finally this allows us to reuse some artifacts such as our `TargetMachine` creation, where all our options we used today aren't necessarily supported by upstream LLVM yet. My hope is that we can get some experience with this copy/paste in tree and then eventually upstream some work to LLVM itself to avoid the duplication while still ensuring our needs are met. Otherwise I fear that maintaining these bindings may be quite costly over the years with LLVM updates!
2017-07-23 10:14:38 -05:00
Expected<bool> Result = Importer.importFunctions(Mod, ImportList);
if (!Result) {
LLVMRustSetLastError(toString(Result.takeError()).c_str());
return false;
}
return true;
}
// This struct and various functions are sort of a hack right now, but the
// problem is that we've got in-memory LLVM modules after we generate and
// optimize all codegen-units for one compilation in rustc. To be compatible
// with the LTO support above we need to serialize the modules plus their
// ThinLTO summary into memory.
//
// This structure is basically an owned version of a serialize module, with
// a ThinLTO summary attached.
struct LLVMRustThinLTOBuffer {
std::string data;
};
extern "C" LLVMRustThinLTOBuffer*
LLVMRustThinLTOBufferCreate(LLVMModuleRef M, bool is_thin) {
2019-12-31 07:08:25 -06:00
auto Ret = std::make_unique<LLVMRustThinLTOBuffer>();
rustc: Implement ThinLTO This commit is an implementation of LLVM's ThinLTO for consumption in rustc itself. Currently today LTO works by merging all relevant LLVM modules into one and then running optimization passes. "Thin" LTO operates differently by having more sharded work and allowing parallelism opportunities between optimizing codegen units. Further down the road Thin LTO also allows *incremental* LTO which should enable even faster release builds without compromising on the performance we have today. This commit uses a `-Z thinlto` flag to gate whether ThinLTO is enabled. It then also implements two forms of ThinLTO: * In one mode we'll *only* perform ThinLTO over the codegen units produced in a single compilation. That is, we won't load upstream rlibs, but we'll instead just perform ThinLTO amongst all codegen units produced by the compiler for the local crate. This is intended to emulate a desired end point where we have codegen units turned on by default for all crates and ThinLTO allows us to do this without performance loss. * In anther mode, like full LTO today, we'll optimize all upstream dependencies in "thin" mode. Unlike today, however, this LTO step is fully parallelized so should finish much more quickly. There's a good bit of comments about what the implementation is doing and where it came from, but the tl;dr; is that currently most of the support here is copied from upstream LLVM. This code duplication is done for a number of reasons: * Controlling parallelism means we can use the existing jobserver support to avoid overloading machines. * We will likely want a slightly different form of incremental caching which integrates with our own incremental strategy, but this is yet to be determined. * This buys us some flexibility about when/where we run ThinLTO, as well as having it tailored to fit our needs for the time being. * Finally this allows us to reuse some artifacts such as our `TargetMachine` creation, where all our options we used today aren't necessarily supported by upstream LLVM yet. My hope is that we can get some experience with this copy/paste in tree and then eventually upstream some work to LLVM itself to avoid the duplication while still ensuring our needs are met. Otherwise I fear that maintaining these bindings may be quite costly over the years with LLVM updates!
2017-07-23 10:14:38 -05:00
{
raw_string_ostream OS(Ret->data);
{
if (is_thin) {
PassBuilder PB;
LoopAnalysisManager LAM;
FunctionAnalysisManager FAM;
CGSCCAnalysisManager CGAM;
ModuleAnalysisManager MAM;
PB.registerModuleAnalyses(MAM);
PB.registerCGSCCAnalyses(CGAM);
PB.registerFunctionAnalyses(FAM);
PB.registerLoopAnalyses(LAM);
PB.crossRegisterProxies(LAM, FAM, CGAM, MAM);
ModulePassManager MPM;
MPM.addPass(ThinLTOBitcodeWriterPass(OS, nullptr));
MPM.run(*unwrap(M), MAM);
} else {
WriteBitcodeToFile(*unwrap(M), OS);
}
rustc: Implement ThinLTO This commit is an implementation of LLVM's ThinLTO for consumption in rustc itself. Currently today LTO works by merging all relevant LLVM modules into one and then running optimization passes. "Thin" LTO operates differently by having more sharded work and allowing parallelism opportunities between optimizing codegen units. Further down the road Thin LTO also allows *incremental* LTO which should enable even faster release builds without compromising on the performance we have today. This commit uses a `-Z thinlto` flag to gate whether ThinLTO is enabled. It then also implements two forms of ThinLTO: * In one mode we'll *only* perform ThinLTO over the codegen units produced in a single compilation. That is, we won't load upstream rlibs, but we'll instead just perform ThinLTO amongst all codegen units produced by the compiler for the local crate. This is intended to emulate a desired end point where we have codegen units turned on by default for all crates and ThinLTO allows us to do this without performance loss. * In anther mode, like full LTO today, we'll optimize all upstream dependencies in "thin" mode. Unlike today, however, this LTO step is fully parallelized so should finish much more quickly. There's a good bit of comments about what the implementation is doing and where it came from, but the tl;dr; is that currently most of the support here is copied from upstream LLVM. This code duplication is done for a number of reasons: * Controlling parallelism means we can use the existing jobserver support to avoid overloading machines. * We will likely want a slightly different form of incremental caching which integrates with our own incremental strategy, but this is yet to be determined. * This buys us some flexibility about when/where we run ThinLTO, as well as having it tailored to fit our needs for the time being. * Finally this allows us to reuse some artifacts such as our `TargetMachine` creation, where all our options we used today aren't necessarily supported by upstream LLVM yet. My hope is that we can get some experience with this copy/paste in tree and then eventually upstream some work to LLVM itself to avoid the duplication while still ensuring our needs are met. Otherwise I fear that maintaining these bindings may be quite costly over the years with LLVM updates!
2017-07-23 10:14:38 -05:00
}
}
return Ret.release();
}
extern "C" void
LLVMRustThinLTOBufferFree(LLVMRustThinLTOBuffer *Buffer) {
delete Buffer;
}
extern "C" const void*
LLVMRustThinLTOBufferPtr(const LLVMRustThinLTOBuffer *Buffer) {
return Buffer->data.data();
}
extern "C" size_t
LLVMRustThinLTOBufferLen(const LLVMRustThinLTOBuffer *Buffer) {
return Buffer->data.length();
}
// This is what we used to parse upstream bitcode for actual ThinLTO
// processing. We'll call this once per module optimized through ThinLTO, and
rustc: Implement ThinLTO This commit is an implementation of LLVM's ThinLTO for consumption in rustc itself. Currently today LTO works by merging all relevant LLVM modules into one and then running optimization passes. "Thin" LTO operates differently by having more sharded work and allowing parallelism opportunities between optimizing codegen units. Further down the road Thin LTO also allows *incremental* LTO which should enable even faster release builds without compromising on the performance we have today. This commit uses a `-Z thinlto` flag to gate whether ThinLTO is enabled. It then also implements two forms of ThinLTO: * In one mode we'll *only* perform ThinLTO over the codegen units produced in a single compilation. That is, we won't load upstream rlibs, but we'll instead just perform ThinLTO amongst all codegen units produced by the compiler for the local crate. This is intended to emulate a desired end point where we have codegen units turned on by default for all crates and ThinLTO allows us to do this without performance loss. * In anther mode, like full LTO today, we'll optimize all upstream dependencies in "thin" mode. Unlike today, however, this LTO step is fully parallelized so should finish much more quickly. There's a good bit of comments about what the implementation is doing and where it came from, but the tl;dr; is that currently most of the support here is copied from upstream LLVM. This code duplication is done for a number of reasons: * Controlling parallelism means we can use the existing jobserver support to avoid overloading machines. * We will likely want a slightly different form of incremental caching which integrates with our own incremental strategy, but this is yet to be determined. * This buys us some flexibility about when/where we run ThinLTO, as well as having it tailored to fit our needs for the time being. * Finally this allows us to reuse some artifacts such as our `TargetMachine` creation, where all our options we used today aren't necessarily supported by upstream LLVM yet. My hope is that we can get some experience with this copy/paste in tree and then eventually upstream some work to LLVM itself to avoid the duplication while still ensuring our needs are met. Otherwise I fear that maintaining these bindings may be quite costly over the years with LLVM updates!
2017-07-23 10:14:38 -05:00
// it'll be called concurrently on many threads.
extern "C" LLVMModuleRef
LLVMRustParseBitcodeForLTO(LLVMContextRef Context,
const char *data,
size_t len,
const char *identifier) {
rustc: Implement ThinLTO This commit is an implementation of LLVM's ThinLTO for consumption in rustc itself. Currently today LTO works by merging all relevant LLVM modules into one and then running optimization passes. "Thin" LTO operates differently by having more sharded work and allowing parallelism opportunities between optimizing codegen units. Further down the road Thin LTO also allows *incremental* LTO which should enable even faster release builds without compromising on the performance we have today. This commit uses a `-Z thinlto` flag to gate whether ThinLTO is enabled. It then also implements two forms of ThinLTO: * In one mode we'll *only* perform ThinLTO over the codegen units produced in a single compilation. That is, we won't load upstream rlibs, but we'll instead just perform ThinLTO amongst all codegen units produced by the compiler for the local crate. This is intended to emulate a desired end point where we have codegen units turned on by default for all crates and ThinLTO allows us to do this without performance loss. * In anther mode, like full LTO today, we'll optimize all upstream dependencies in "thin" mode. Unlike today, however, this LTO step is fully parallelized so should finish much more quickly. There's a good bit of comments about what the implementation is doing and where it came from, but the tl;dr; is that currently most of the support here is copied from upstream LLVM. This code duplication is done for a number of reasons: * Controlling parallelism means we can use the existing jobserver support to avoid overloading machines. * We will likely want a slightly different form of incremental caching which integrates with our own incremental strategy, but this is yet to be determined. * This buys us some flexibility about when/where we run ThinLTO, as well as having it tailored to fit our needs for the time being. * Finally this allows us to reuse some artifacts such as our `TargetMachine` creation, where all our options we used today aren't necessarily supported by upstream LLVM yet. My hope is that we can get some experience with this copy/paste in tree and then eventually upstream some work to LLVM itself to avoid the duplication while still ensuring our needs are met. Otherwise I fear that maintaining these bindings may be quite costly over the years with LLVM updates!
2017-07-23 10:14:38 -05:00
StringRef Data(data, len);
MemoryBufferRef Buffer(Data, identifier);
unwrap(Context)->enableDebugTypeODRUniquing();
Expected<std::unique_ptr<Module>> SrcOrError =
parseBitcodeFile(Buffer, *unwrap(Context));
if (!SrcOrError) {
LLVMRustSetLastError(toString(SrcOrError.takeError()).c_str());
return nullptr;
}
return wrap(std::move(*SrcOrError).release());
}
Store LLVM bitcode in object files, not compressed This commit is an attempted resurrection of #70458 where LLVM bitcode emitted by rustc into rlibs is stored into object file sections rather than in a separate file. The main rationale for doing this is that when rustc emits bitcode it will no longer use a custom compression scheme which makes it both easier to interoperate with existing tools and also cuts down on compile time since this compression isn't happening. The blocker for this in #70458 turned out to be that native linkers didn't handle the new sections well, causing the sections to either trigger bugs in the linker or actually end up in the final linked artifact. This commit attempts to address these issues by ensuring that native linkers ignore the new sections by inserting custom flags with module-level inline assembly. Note that this does not currently change the API of the compiler at all. The pre-existing `-C bitcode-in-rlib` flag is co-opted to indicate whether the bitcode should be present in the object file or not. Finally, note that an important consequence of this commit, which is also one of its primary purposes, is to enable rustc's `-Clto` bitcode loading to load rlibs produced with `-Clinker-plugin-lto`. The goal here is that when you're building with LTO Cargo will tell rustc to skip codegen of all intermediate crates and only generate LLVM IR. Today rustc will generate both object code and LLVM IR, but the object code is later simply thrown away, wastefully.
2020-04-23 13:45:55 -05:00
// Find the bitcode section in the object file data and return it as a slice.
// Fail if the bitcode section is present but empty.
//
// On success, the return value is the pointer to the start of the slice and
// `out_len` is filled with the (non-zero) length. On failure, the return value
// is `nullptr` and `out_len` is set to zero.
extern "C" const char*
LLVMRustGetBitcodeSliceFromObjectData(const char *data,
size_t len,
size_t *out_len) {
*out_len = 0;
StringRef Data(data, len);
MemoryBufferRef Buffer(Data, ""); // The id is unused.
Expected<MemoryBufferRef> BitcodeOrError =
object::IRObjectFile::findBitcodeInMemBuffer(Buffer);
if (!BitcodeOrError) {
LLVMRustSetLastError(toString(BitcodeOrError.takeError()).c_str());
return nullptr;
}
*out_len = BitcodeOrError->getBufferSize();
return BitcodeOrError->getBufferStart();
}
Use llvm::computeLTOCacheKey to determine post-ThinLTO CGU reuse During incremental ThinLTO compilation, we attempt to re-use the optimized (post-ThinLTO) bitcode file for a module if it is 'safe' to do so. Up until now, 'safe' has meant that the set of modules that our current modules imports from/exports to is unchanged from the previous compilation session. See PR #67020 and PR #71131 for more details. However, this turns out be insufficient to guarantee that it's safe to reuse the post-LTO module (i.e. that optimizing the pre-LTO module would produce the same result). When LLVM optimizes a module during ThinLTO, it may look at other information from the 'module index', such as whether a (non-imported!) global variable is used. If this information changes between compilation runs, we may end up re-using an optimized module that (for example) had dead-code elimination run on a function that is now used by another module. Fortunately, LLVM implements its own ThinLTO module cache, which is used when ThinLTO is performed by a linker plugin (e.g. when clang is used to compile a C proect). Using this cache directly would require extensive refactoring of our code - but fortunately for us, LLVM provides a function that does exactly what we need. The function `llvm::computeLTOCacheKey` is used to compute a SHA-1 hash from all data that might influence the result of ThinLTO on a module. In addition to the module imports/exports that we manually track, it also hashes information about global variables (e.g. their liveness) which might be used during optimization. By using this function, we shouldn't have to worry about new LLVM passes breaking our module re-use behavior. In LLVM, the output of this function forms part of the filename used to store the post-ThinLTO module. To keep our current filename structure intact, this PR just writes out the mapping 'CGU name -> Hash' to a file. To determine if a post-LTO module should be reused, we compare hashes from the previous session. This should unblock PR #75199 - by sheer chance, it seems to have hit this issue due to the particular CGU partitioning and optimization decisions that end up getting made.
2020-09-17 16:36:13 -05:00
// Computes the LTO cache key for the provided 'ModId' in the given 'Data',
// storing the result in 'KeyOut'.
// Currently, this cache key is a SHA-1 hash of anything that could affect
// the result of optimizing this module (e.g. module imports, exports, liveness
// of access globals, etc).
// The precise details are determined by LLVM in `computeLTOCacheKey`, which is
// used during the normal linker-plugin incremental thin-LTO process.
extern "C" void
LLVMRustComputeLTOCacheKey(RustStringRef KeyOut, const char *ModId, LLVMRustThinLTOData *Data) {
SmallString<40> Key;
llvm::lto::Config conf;
const auto &ImportList = Data->ImportLists.lookup(ModId);
const auto &ExportList = Data->ExportLists.lookup(ModId);
const auto &ResolvedODR = Data->ResolvedODR.lookup(ModId);
const auto &DefinedGlobals = Data->ModuleToDefinedGVSummaries.lookup(ModId);
std::set<GlobalValue::GUID> CfiFunctionDefs;
std::set<GlobalValue::GUID> CfiFunctionDecls;
// Based on the 'InProcessThinBackend' constructor in LLVM
for (auto &Name : Data->Index.cfiFunctionDefs())
CfiFunctionDefs.insert(
GlobalValue::getGUID(GlobalValue::dropLLVMManglingEscape(Name)));
for (auto &Name : Data->Index.cfiFunctionDecls())
CfiFunctionDecls.insert(
GlobalValue::getGUID(GlobalValue::dropLLVMManglingEscape(Name)));
llvm::computeLTOCacheKey(Key, conf, Data->Index, ModId,
ImportList, ExportList, ResolvedODR, DefinedGlobals, CfiFunctionDefs, CfiFunctionDecls
);
LLVMRustStringWriteImpl(KeyOut, Key.c_str(), Key.size());
}