rust/src/librustc/driver/driver.rs

1203 lines
43 KiB
Rust
Raw Normal View History

// Copyright 2012-2013 The Rust Project Developers. See the COPYRIGHT
// file at the top-level directory of this distribution and at
// http://rust-lang.org/COPYRIGHT.
//
// Licensed under the Apache License, Version 2.0 <LICENSE-APACHE or
// http://www.apache.org/licenses/LICENSE-2.0> or the MIT license
// <LICENSE-MIT or http://opensource.org/licenses/MIT>, at your
// option. This file may not be copied, modified, or distributed
// except according to those terms.
use back::link;
2013-01-29 22:28:08 +08:00
use back::{arm, x86, x86_64, mips};
Redesign output flags for rustc This commit removes the -c, --emit-llvm, -s, --rlib, --dylib, --staticlib, --lib, and --bin flags from rustc, adding the following flags: * --emit=[asm,ir,bc,obj,link] * --crate-type=[dylib,rlib,staticlib,bin,lib] The -o option has also been redefined to be used for *all* flavors of outputs. This means that we no longer ignore it for libraries. The --out-dir remains the same as before. The new logic for files that rustc emits is as follows: 1. Output types are dictated by the --emit flag. The default value is --emit=link, and this option can be passed multiple times and have all options stacked on one another. 2. Crate types are dictated by the --crate-type flag and the #[crate_type] attribute. The flags can be passed many times and stack with the crate attribute. 3. If the -o flag is specified, and only one output type is specified, the output will be emitted at this location. If more than one output type is specified, then the filename of -o is ignored, and all output goes in the directory that -o specifies. The -o option always ignores the --out-dir option. 4. If the --out-dir flag is specified, all output goes in this directory. 5. If -o and --out-dir are both not present, all output goes in the current directory of the process. 6. When multiple output types are specified, the filestem of all output is the same as the name of the CrateId (derived from a crate attribute or from the filestem of the crate file). Closes #7791 Closes #11056 Closes #11667
2014-02-03 15:27:54 -08:00
use driver::session::{Aggressive, CrateTypeExecutable};
2013-03-26 16:38:07 -04:00
use driver::session::{Session, Session_, No, Less, Default};
use driver::session;
use front;
use lib::llvm::llvm;
use lib::llvm::{ContextRef, ModuleRef};
use metadata::common::LinkMeta;
2013-12-25 13:08:04 -07:00
use metadata::{creader, filesearch};
use metadata::cstore::CStore;
2013-12-25 11:10:33 -07:00
use metadata::creader::Loader;
use metadata;
use middle::{trans, freevars, kind, ty, typeck, lint, astencode, reachable};
use middle;
use util::common::time;
2012-09-04 11:54:36 -07:00
use util::ppaux;
use extra::json;
use serialize::Encodable;
use std::cell::{Cell, RefCell};
use std::hashmap::{HashMap,HashSet};
2013-11-10 22:46:32 -08:00
use std::io;
use std::io::fs;
use std::io::MemReader;
use std::os;
use std::vec;
use getopts::{optopt, optmulti, optflag, optflagopt};
2014-02-02 15:20:32 -08:00
use getopts;
use syntax::ast;
use syntax::abi;
use syntax::attr;
use syntax::attr::{AttrMetaMethods};
use syntax::codemap;
use syntax::diagnostic;
2014-02-07 00:38:33 +02:00
use syntax::diagnostic::Emitter;
2013-12-25 11:10:33 -07:00
use syntax::ext::base::CrateLoader;
use syntax::parse;
use syntax::parse::token::InternedString;
2013-05-14 17:27:27 -07:00
use syntax::parse::token;
use syntax::print::{pp, pprust};
use syntax;
pub enum PpMode {
PpmNormal,
PpmExpanded,
PpmTyped,
PpmIdentified,
PpmExpandedIdentified
}
/**
* The name used for source code that doesn't originate in a file
* (e.g. source from stdin or a string)
*/
2014-01-15 16:42:51 -08:00
pub fn anon_src() -> ~str {
"<anon>".to_str()
}
2014-01-15 16:42:51 -08:00
pub fn source_name(input: &Input) -> ~str {
match *input {
// FIXME (#9639): This needs to handle non-utf8 paths
2014-01-15 16:42:51 -08:00
FileInput(ref ifile) => ifile.as_str().unwrap().to_str(),
StrInput(_) => anon_src()
}
}
pub fn default_configuration(sess: Session) ->
ast::CrateConfig {
let tos = match sess.targ_cfg.os {
abi::OsWin32 => InternedString::new("win32"),
abi::OsMacos => InternedString::new("macos"),
abi::OsLinux => InternedString::new("linux"),
abi::OsAndroid => InternedString::new("android"),
abi::OsFreebsd => InternedString::new("freebsd"),
};
// ARM is bi-endian, however using NDK seems to default
// to little-endian unless a flag is provided.
let (end,arch,wordsz) = match sess.targ_cfg.arch {
abi::X86 => ("little", "x86", "32"),
abi::X86_64 => ("little", "x86_64", "64"),
abi::Arm => ("little", "arm", "32"),
abi::Mips => ("big", "mips", "32")
};
2013-11-20 01:30:51 -05:00
let fam = match sess.targ_cfg.os {
abi::OsWin32 => InternedString::new("windows"),
_ => InternedString::new("unix")
2013-11-20 01:30:51 -05:00
};
2013-06-15 00:43:19 -07:00
let mk = attr::mk_name_value_item_str;
2012-08-01 17:30:05 -07:00
return ~[ // Target bindings.
attr::mk_word_item(fam.clone()),
mk(InternedString::new("target_os"), tos),
mk(InternedString::new("target_family"), fam),
mk(InternedString::new("target_arch"), InternedString::new(arch)),
mk(InternedString::new("target_endian"), InternedString::new(end)),
mk(InternedString::new("target_word_size"),
InternedString::new(wordsz)),
];
}
pub fn append_configuration(cfg: &mut ast::CrateConfig,
name: InternedString) {
if !cfg.iter().any(|mi| mi.name() == name) {
cfg.push(attr::mk_word_item(name))
}
}
pub fn build_configuration(sess: Session) ->
ast::CrateConfig {
// Combine the configuration requested by the session (command line) with
// some default and generated configuration items
let default_cfg = default_configuration(sess);
let mut user_cfg = sess.opts.cfg.clone();
// If the user wants a test runner, then add the test cfg
if sess.opts.test {
append_configuration(&mut user_cfg, InternedString::new("test"))
}
// If the user requested GC, then add the GC cfg
append_configuration(&mut user_cfg, if sess.opts.gc {
InternedString::new("gc")
} else {
InternedString::new("nogc")
});
return vec::append(user_cfg, default_cfg);
}
// Convert strings provided as --cfg [cfgspec] into a crate_cfg
2014-02-07 00:38:33 +02:00
fn parse_cfgspecs(cfgspecs: ~[~str])
-> ast::CrateConfig {
cfgspecs.move_iter().map(|s| {
2014-02-07 00:38:33 +02:00
let sess = parse::new_parse_sess();
2014-01-15 16:42:51 -08:00
parse::parse_meta_from_source_str("cfgspec".to_str(), s, ~[], sess)
}).collect::<ast::CrateConfig>()
}
pub enum Input {
/// Load source from file
FileInput(Path),
/// The string is the source
StrInput(~str)
}
pub fn phase_1_parse_input(sess: Session, cfg: ast::CrateConfig, input: &Input)
2013-09-27 19:46:09 -07:00
-> ast::Crate {
let krate = time(sess.time_passes(), "parsing", (), |_| {
match *input {
FileInput(ref file) => {
parse::parse_crate_from_file(&(*file), cfg.clone(), sess.parse_sess)
}
StrInput(ref src) => {
parse::parse_crate_from_source_str(anon_src(),
(*src).clone(),
cfg.clone(),
sess.parse_sess)
}
}
});
if sess.opts.debugging_opts & session::AST_JSON_NOEXPAND != 0 {
let mut stdout = io::stdout();
let mut json = json::PrettyEncoder::new(&mut stdout);
krate.encode(&mut json);
}
krate
}
// For continuing compilation after a parsed crate has been
// modified
/// Run the "early phases" of the compiler: initial `cfg` processing,
/// syntax expansion, secondary `cfg` expansion, synthesis of a test
/// harness if one is to be provided and injection of a dependency on the
/// standard library and prelude.
pub fn phase_2_configure_and_expand(sess: Session,
2013-12-25 11:10:33 -07:00
loader: &mut CrateLoader,
mut krate: ast::Crate)
-> (ast::Crate, syntax::ast_map::Map) {
let time_passes = sess.time_passes();
sess.building_library.set(session::building_library(sess.opts, &krate));
sess.crate_types.set(session::collect_crate_types(&sess, krate.attrs));
time(time_passes, "gated feature checking", (), |_|
front::feature_gate::check_crate(sess, &krate));
2012-06-30 16:19:07 -07:00
krate = time(time_passes, "crate injection", krate, |krate|
front::std_inject::maybe_inject_crates_ref(sess, krate));
// strip before expansion to allow macros to depend on
// configuration variables e.g/ in
//
// #[macro_escape] #[cfg(foo)]
// mod bar { macro_rules! baz!(() => {{}}) }
//
// baz! should not use this definition unless foo is enabled.
krate = time(time_passes, "configuration 1", krate, |krate|
front::config::strip_unconfigured_items(krate));
krate = time(time_passes, "expansion", krate, |krate| {
2013-12-25 11:10:33 -07:00
syntax::ext::expand::expand_crate(sess.parse_sess,
loader,
krate)
2013-12-25 11:10:33 -07:00
});
// dump the syntax-time crates
sess.cstore.reset();
// strip again, in case expansion added anything with a #[cfg].
krate = time(time_passes, "configuration 2", krate, |krate|
front::config::strip_unconfigured_items(krate));
krate = time(time_passes, "maybe building test harness", krate, |krate|
front::test::modify_for_testing(sess, krate));
krate = time(time_passes, "prelude injection", krate, |krate|
front::std_inject::maybe_inject_prelude(sess, krate));
2012-06-30 16:19:07 -07:00
let (krate, map) = time(time_passes, "assinging node ids and indexing ast", krate, |krate|
front::assign_node_ids_and_map::assign_node_ids_and_map(sess, krate));
if sess.opts.debugging_opts & session::AST_JSON != 0 {
let mut stdout = io::stdout();
let mut json = json::PrettyEncoder::new(&mut stdout);
krate.encode(&mut json);
}
(krate, map)
}
pub struct CrateAnalysis {
exp_map2: middle::resolve::ExportMap2,
exported_items: middle::privacy::ExportedItems,
public_items: middle::privacy::PublicItems,
ty_cx: ty::ctxt,
maps: astencode::Maps,
reachable: @RefCell<HashSet<ast::NodeId>>
}
/// Run the resolution, typechecking, region checking and other
/// miscellaneous analysis passes on the crate. Return various
/// structures carrying the results of the analysis.
pub fn phase_3_run_analysis_passes(sess: Session,
krate: &ast::Crate,
ast_map: syntax::ast_map::Map) -> CrateAnalysis {
let time_passes = sess.time_passes();
time(time_passes, "external crate/lib resolution", (), |_|
creader::read_crates(sess, krate,
session::sess_os_to_meta_os(sess.targ_cfg.os),
token::get_ident_interner()));
2012-06-30 16:19:07 -07:00
let lang_items = time(time_passes, "language item collection", (), |_|
middle::lang_items::collect_language_items(krate, sess));
let middle::resolve::CrateMap {
def_map: def_map,
exp_map2: exp_map2,
Extract privacy checking from name resolution This commit is the culmination of my recent effort to refine Rust's notion of privacy and visibility among crates. The major goals of this commit were to remove privacy checking from resolve for the sake of sane error messages, and to attempt a much more rigid and well-tested implementation of visibility throughout rust. The implemented rules for name visibility are: 1. Everything pub from the root namespace is visible to anyone 2. You may access any private item of your ancestors. "Accessing a private item" depends on what the item is, so for a function this means that you can call it, but for a module it means that you can look inside of it. Once you look inside a private module, any accessed item must be "pub from the root" where the new root is the private module that you looked into. These rules required some more analysis results to get propagated from trans to privacy in the form of a few hash tables. I added a new test in which my goal was to showcase all of the privacy nuances of the language, and I hope to place any new bugs into this file to prevent regressions. Overall, I was unable to completely remove the notion of privacy from resolve. One use of privacy is for dealing with glob imports. Essentially a glob import can only import *public* items from the destination, and because this must be done at namespace resolution time, resolve must maintain the notion of "what items are public in a module". There are some sad approximations of privacy, but I unfortunately can't see clear methods to extract them outside. The other use case of privacy in resolve now is one that must stick around regardless of glob imports. When dealing with privacy, checking a private path needs to know "what the last private thing was" when looking at a path. Resolve is the only compiler pass which knows the answer to this question, so it maintains the answer on a per-path resolution basis (works similarly to the def_map generated). Closes #8215
2013-10-05 14:37:39 -07:00
trait_map: trait_map,
external_exports: external_exports,
last_private_map: last_private_map
} =
time(time_passes, "resolution", (), |_|
middle::resolve::resolve_crate(sess, lang_items, krate));
2012-06-30 16:19:07 -07:00
let named_region_map = time(time_passes, "lifetime resolution", (),
|_| middle::resolve_lifetime::krate(sess, krate));
time(time_passes, "looking for entry point", (),
|_| middle::entry::find_entry_point(sess, krate, &ast_map));
2012-06-30 16:19:07 -07:00
2013-12-25 11:10:33 -07:00
sess.macro_registrar_fn.with_mut(|r| *r =
time(time_passes, "looking for macro registrar", (), |_|
syntax::ext::registrar::find_macro_registrar(
sess.span_diagnostic, krate)));
2013-12-25 11:10:33 -07:00
let freevars = time(time_passes, "freevar finding", (), |_|
freevars::annotate_freevars(def_map, krate));
let region_map = time(time_passes, "region resolution", (), |_|
middle::region::resolve_crate(sess, krate));
let ty_cx = ty::mk_ctxt(sess, def_map, named_region_map, ast_map, freevars,
region_map, lang_items);
// passes are timed inside typeck
let (method_map, vtable_map) = typeck::check_crate(ty_cx, trait_map, krate);
2012-06-30 16:19:07 -07:00
// These next two const passes can probably be merged
time(time_passes, "const marking", (), |_|
middle::const_eval::process_crate(krate, ty_cx));
2012-06-30 16:19:07 -07:00
time(time_passes, "const checking", (), |_|
middle::check_const::check_crate(sess, krate, def_map,
method_map, ty_cx));
2012-06-30 16:19:07 -07:00
Extract privacy checking from name resolution This commit is the culmination of my recent effort to refine Rust's notion of privacy and visibility among crates. The major goals of this commit were to remove privacy checking from resolve for the sake of sane error messages, and to attempt a much more rigid and well-tested implementation of visibility throughout rust. The implemented rules for name visibility are: 1. Everything pub from the root namespace is visible to anyone 2. You may access any private item of your ancestors. "Accessing a private item" depends on what the item is, so for a function this means that you can call it, but for a module it means that you can look inside of it. Once you look inside a private module, any accessed item must be "pub from the root" where the new root is the private module that you looked into. These rules required some more analysis results to get propagated from trans to privacy in the form of a few hash tables. I added a new test in which my goal was to showcase all of the privacy nuances of the language, and I hope to place any new bugs into this file to prevent regressions. Overall, I was unable to completely remove the notion of privacy from resolve. One use of privacy is for dealing with glob imports. Essentially a glob import can only import *public* items from the destination, and because this must be done at namespace resolution time, resolve must maintain the notion of "what items are public in a module". There are some sad approximations of privacy, but I unfortunately can't see clear methods to extract them outside. The other use case of privacy in resolve now is one that must stick around regardless of glob imports. When dealing with privacy, checking a private path needs to know "what the last private thing was" when looking at a path. Resolve is the only compiler pass which knows the answer to this question, so it maintains the answer on a per-path resolution basis (works similarly to the def_map generated). Closes #8215
2013-10-05 14:37:39 -07:00
let maps = (external_exports, last_private_map);
let (exported_items, public_items) =
time(time_passes, "privacy checking", maps, |(a, b)|
middle::privacy::check_crate(ty_cx, &method_map, &exp_map2,
a, b, krate));
2012-06-30 16:19:07 -07:00
time(time_passes, "effect checking", (), |_|
middle::effect::check_crate(ty_cx, method_map, krate));
time(time_passes, "loop checking", (), |_|
middle::check_loop::check_crate(ty_cx, krate));
2012-06-30 16:19:07 -07:00
let middle::moves::MoveMaps {moves_map, moved_variables_set,
capture_map} =
time(time_passes, "compute moves", (), |_|
middle::moves::compute_moves(ty_cx, method_map, krate));
time(time_passes, "match checking", (), |_|
middle::check_match::check_crate(ty_cx, method_map,
moves_map, krate));
time(time_passes, "liveness checking", (), |_|
middle::liveness::check_crate(ty_cx, method_map,
capture_map, krate));
let root_map =
time(time_passes, "borrow checking", (), |_|
middle::borrowck::check_crate(ty_cx, method_map,
moves_map, moved_variables_set,
capture_map, krate));
time(time_passes, "kind checking", (), |_|
kind::check_crate(ty_cx, method_map, krate));
2013-06-14 17:38:17 +12:00
let reachable_map =
time(time_passes, "reachability checking", (), |_|
reachable::find_reachable(ty_cx, method_map, &exported_items));
2013-06-14 17:38:17 +12:00
{
let reachable_map = reachable_map.borrow();
time(time_passes, "death checking", (), |_| {
middle::dead::check_crate(ty_cx,
method_map,
&exported_items,
reachable_map.get(),
krate)
});
}
2013-12-08 02:55:27 -05:00
time(time_passes, "lint checking", (), |_|
lint::check_crate(ty_cx, method_map, &exported_items, krate));
CrateAnalysis {
exp_map2: exp_map2,
ty_cx: ty_cx,
exported_items: exported_items,
public_items: public_items,
maps: astencode::Maps {
2013-06-14 17:38:17 +12:00
root_map: root_map,
method_map: method_map,
vtable_map: vtable_map,
capture_map: capture_map
},
reachable: reachable_map
}
}
2013-06-14 17:38:17 +12:00
pub struct CrateTranslation {
context: ContextRef,
module: ModuleRef,
Store metadata separately in rlib files Right now whenever an rlib file is linked against, all of the metadata from the rlib is pulled in to the final staticlib or binary. The reason for this is that the metadata is currently stored in a section of the object file. Note that this is intentional for dynamic libraries in order to distribute metadata bundled with static libraries. This commit alters the situation for rlib libraries to instead store the metadata in a separate file in the archive. In doing so, when the archive is passed to the linker, none of the metadata will get pulled into the result executable. Furthermore, the metadata file is skipped when assembling rlibs into an archive. The snag in this implementation comes with multiple output formats. When generating a dylib, the metadata needs to be in the object file, but when generating an rlib this needs to be separate. In order to accomplish this, the metadata variable is inserted into an entirely separate LLVM Module which is then codegen'd into a different location (foo.metadata.o). This is then linked into dynamic libraries and silently ignored for rlib files. While changing how metadata is inserted into archives, I have also stopped compressing metadata when inserted into rlib files. We have wanted to stop compressing metadata, but the sections it creates in object file sections are apparently too large. Thankfully if it's just an arbitrary file it doesn't matter how large it is. I have seen massive reductions in executable sizes, as well as staticlib output sizes (to confirm that this is all working).
2013-12-03 17:41:01 -08:00
metadata_module: ModuleRef,
Add generation of static libraries to rustc This commit implements the support necessary for generating both intermediate and result static rust libraries. This is an implementation of my thoughts in https://mail.mozilla.org/pipermail/rust-dev/2013-November/006686.html. When compiling a library, we still retain the "lib" option, although now there are "rlib", "staticlib", and "dylib" as options for crate_type (and these are stackable). The idea of "lib" is to generate the "compiler default" instead of having too choose (although all are interchangeable). For now I have left the "complier default" to be a dynamic library for size reasons. Of the rust libraries, lib{std,extra,rustuv} will bootstrap with an rlib/dylib pair, but lib{rustc,syntax,rustdoc,rustpkg} will only be built as a dynamic object. I chose this for size reasons, but also because you're probably not going to be embedding the rustc compiler anywhere any time soon. Other than the options outlined above, there are a few defaults/preferences that are now opinionated in the compiler: * If both a .dylib and .rlib are found for a rust library, the compiler will prefer the .rlib variant. This is overridable via the -Z prefer-dynamic option * If generating a "lib", the compiler will generate a dynamic library. This is overridable by explicitly saying what flavor you'd like (rlib, staticlib, dylib). * If no options are passed to the command line, and no crate_type is found in the destination crate, then an executable is generated With this change, you can successfully build a rust program with 0 dynamic dependencies on rust libraries. There is still a dynamic dependency on librustrt, but I plan on removing that in a subsequent commit. This change includes no tests just yet. Our current testing infrastructure/harnesses aren't very amenable to doing flavorful things with linking, so I'm planning on adding a new mode of testing which I believe belongs as a separate commit. Closes #552
2013-11-15 14:03:29 -08:00
link: LinkMeta,
Store metadata separately in rlib files Right now whenever an rlib file is linked against, all of the metadata from the rlib is pulled in to the final staticlib or binary. The reason for this is that the metadata is currently stored in a section of the object file. Note that this is intentional for dynamic libraries in order to distribute metadata bundled with static libraries. This commit alters the situation for rlib libraries to instead store the metadata in a separate file in the archive. In doing so, when the archive is passed to the linker, none of the metadata will get pulled into the result executable. Furthermore, the metadata file is skipped when assembling rlibs into an archive. The snag in this implementation comes with multiple output formats. When generating a dylib, the metadata needs to be in the object file, but when generating an rlib this needs to be separate. In order to accomplish this, the metadata variable is inserted into an entirely separate LLVM Module which is then codegen'd into a different location (foo.metadata.o). This is then linked into dynamic libraries and silently ignored for rlib files. While changing how metadata is inserted into archives, I have also stopped compressing metadata when inserted into rlib files. We have wanted to stop compressing metadata, but the sections it creates in object file sections are apparently too large. Thankfully if it's just an arbitrary file it doesn't matter how large it is. I have seen massive reductions in executable sizes, as well as staticlib output sizes (to confirm that this is all working).
2013-12-03 17:41:01 -08:00
metadata: ~[u8],
Implement LTO This commit implements LTO for rust leveraging LLVM's passes. What this means is: * When compiling an rlib, in addition to insdering foo.o into the archive, also insert foo.bc (the LLVM bytecode) of the optimized module. * When the compiler detects the -Z lto option, it will attempt to perform LTO on a staticlib or binary output. The compiler will emit an error if a dylib or rlib output is being generated. * The actual act of performing LTO is as follows: 1. Force all upstream libraries to have an rlib version available. 2. Load the bytecode of each upstream library from the rlib. 3. Link all this bytecode into the current LLVM module (just using llvm apis) 4. Run an internalization pass which internalizes all symbols except those found reachable for the local crate of compilation. 5. Run the LLVM LTO pass manager over this entire module 6a. If assembling an archive, then add all upstream rlibs into the output archive. This ignores all of the object/bitcode/metadata files rust generated and placed inside the rlibs. 6b. If linking a binary, create copies of all upstream rlibs, remove the rust-generated object-file, and then link everything as usual. As I have explained in #10741, this process is excruciatingly slow, so this is *not* turned on by default, and it is also why I have decided to hide it behind a -Z flag for now. The good news is that the binary sizes are about as small as they can be as a result of LTO, so it's definitely working. Closes #10741 Closes #10740
2013-12-02 23:19:29 -08:00
reachable: ~[~str],
}
/// Run the translation phase to LLVM, after which the AST and analysis can
/// be discarded.
pub fn phase_4_translate_to_llvm(sess: Session,
krate: ast::Crate,
analysis: &CrateAnalysis,
outputs: &OutputFilenames) -> CrateTranslation {
time(sess.time_passes(), "translation", krate, |krate|
trans::base::trans_crate(sess, krate, analysis, outputs))
}
/// Run LLVM itself, producing a bitcode file, assembly file or object file
/// as a side effect.
pub fn phase_5_run_llvm_passes(sess: Session,
trans: &CrateTranslation,
outputs: &OutputFilenames) {
if sess.opts.cg.no_integrated_as {
2014-01-09 17:42:08 -08:00
let output_type = link::OutputTypeAssembly;
time(sess.time_passes(), "LLVM passes", (), |_|
Redesign output flags for rustc This commit removes the -c, --emit-llvm, -s, --rlib, --dylib, --staticlib, --lib, and --bin flags from rustc, adding the following flags: * --emit=[asm,ir,bc,obj,link] * --crate-type=[dylib,rlib,staticlib,bin,lib] The -o option has also been redefined to be used for *all* flavors of outputs. This means that we no longer ignore it for libraries. The --out-dir remains the same as before. The new logic for files that rustc emits is as follows: 1. Output types are dictated by the --emit flag. The default value is --emit=link, and this option can be passed multiple times and have all options stacked on one another. 2. Crate types are dictated by the --crate-type flag and the #[crate_type] attribute. The flags can be passed many times and stack with the crate attribute. 3. If the -o flag is specified, and only one output type is specified, the output will be emitted at this location. If more than one output type is specified, then the filename of -o is ignored, and all output goes in the directory that -o specifies. The -o option always ignores the --out-dir option. 4. If the --out-dir flag is specified, all output goes in this directory. 5. If -o and --out-dir are both not present, all output goes in the current directory of the process. 6. When multiple output types are specified, the filestem of all output is the same as the name of the CrateId (derived from a crate attribute or from the filestem of the crate file). Closes #7791 Closes #11056 Closes #11667
2014-02-03 15:27:54 -08:00
link::write::run_passes(sess, trans, [output_type], outputs));
Redesign output flags for rustc This commit removes the -c, --emit-llvm, -s, --rlib, --dylib, --staticlib, --lib, and --bin flags from rustc, adding the following flags: * --emit=[asm,ir,bc,obj,link] * --crate-type=[dylib,rlib,staticlib,bin,lib] The -o option has also been redefined to be used for *all* flavors of outputs. This means that we no longer ignore it for libraries. The --out-dir remains the same as before. The new logic for files that rustc emits is as follows: 1. Output types are dictated by the --emit flag. The default value is --emit=link, and this option can be passed multiple times and have all options stacked on one another. 2. Crate types are dictated by the --crate-type flag and the #[crate_type] attribute. The flags can be passed many times and stack with the crate attribute. 3. If the -o flag is specified, and only one output type is specified, the output will be emitted at this location. If more than one output type is specified, then the filename of -o is ignored, and all output goes in the directory that -o specifies. The -o option always ignores the --out-dir option. 4. If the --out-dir flag is specified, all output goes in this directory. 5. If -o and --out-dir are both not present, all output goes in the current directory of the process. 6. When multiple output types are specified, the filestem of all output is the same as the name of the CrateId (derived from a crate attribute or from the filestem of the crate file). Closes #7791 Closes #11056 Closes #11667
2014-02-03 15:27:54 -08:00
link::write::run_assembler(sess, outputs);
2013-08-19 15:21:30 -07:00
// Remove assembly source, unless --save-temps was specified
if !sess.opts.cg.save_temps {
Redesign output flags for rustc This commit removes the -c, --emit-llvm, -s, --rlib, --dylib, --staticlib, --lib, and --bin flags from rustc, adding the following flags: * --emit=[asm,ir,bc,obj,link] * --crate-type=[dylib,rlib,staticlib,bin,lib] The -o option has also been redefined to be used for *all* flavors of outputs. This means that we no longer ignore it for libraries. The --out-dir remains the same as before. The new logic for files that rustc emits is as follows: 1. Output types are dictated by the --emit flag. The default value is --emit=link, and this option can be passed multiple times and have all options stacked on one another. 2. Crate types are dictated by the --crate-type flag and the #[crate_type] attribute. The flags can be passed many times and stack with the crate attribute. 3. If the -o flag is specified, and only one output type is specified, the output will be emitted at this location. If more than one output type is specified, then the filename of -o is ignored, and all output goes in the directory that -o specifies. The -o option always ignores the --out-dir option. 4. If the --out-dir flag is specified, all output goes in this directory. 5. If -o and --out-dir are both not present, all output goes in the current directory of the process. 6. When multiple output types are specified, the filestem of all output is the same as the name of the CrateId (derived from a crate attribute or from the filestem of the crate file). Closes #7791 Closes #11056 Closes #11667
2014-02-03 15:27:54 -08:00
fs::unlink(&outputs.temp_path(link::OutputTypeAssembly)).unwrap();
2013-08-19 15:21:30 -07:00
}
} else {
time(sess.time_passes(), "LLVM passes", (), |_|
link::write::run_passes(sess,
Store metadata separately in rlib files Right now whenever an rlib file is linked against, all of the metadata from the rlib is pulled in to the final staticlib or binary. The reason for this is that the metadata is currently stored in a section of the object file. Note that this is intentional for dynamic libraries in order to distribute metadata bundled with static libraries. This commit alters the situation for rlib libraries to instead store the metadata in a separate file in the archive. In doing so, when the archive is passed to the linker, none of the metadata will get pulled into the result executable. Furthermore, the metadata file is skipped when assembling rlibs into an archive. The snag in this implementation comes with multiple output formats. When generating a dylib, the metadata needs to be in the object file, but when generating an rlib this needs to be separate. In order to accomplish this, the metadata variable is inserted into an entirely separate LLVM Module which is then codegen'd into a different location (foo.metadata.o). This is then linked into dynamic libraries and silently ignored for rlib files. While changing how metadata is inserted into archives, I have also stopped compressing metadata when inserted into rlib files. We have wanted to stop compressing metadata, but the sections it creates in object file sections are apparently too large. Thankfully if it's just an arbitrary file it doesn't matter how large it is. I have seen massive reductions in executable sizes, as well as staticlib output sizes (to confirm that this is all working).
2013-12-03 17:41:01 -08:00
trans,
Redesign output flags for rustc This commit removes the -c, --emit-llvm, -s, --rlib, --dylib, --staticlib, --lib, and --bin flags from rustc, adding the following flags: * --emit=[asm,ir,bc,obj,link] * --crate-type=[dylib,rlib,staticlib,bin,lib] The -o option has also been redefined to be used for *all* flavors of outputs. This means that we no longer ignore it for libraries. The --out-dir remains the same as before. The new logic for files that rustc emits is as follows: 1. Output types are dictated by the --emit flag. The default value is --emit=link, and this option can be passed multiple times and have all options stacked on one another. 2. Crate types are dictated by the --crate-type flag and the #[crate_type] attribute. The flags can be passed many times and stack with the crate attribute. 3. If the -o flag is specified, and only one output type is specified, the output will be emitted at this location. If more than one output type is specified, then the filename of -o is ignored, and all output goes in the directory that -o specifies. The -o option always ignores the --out-dir option. 4. If the --out-dir flag is specified, all output goes in this directory. 5. If -o and --out-dir are both not present, all output goes in the current directory of the process. 6. When multiple output types are specified, the filestem of all output is the same as the name of the CrateId (derived from a crate attribute or from the filestem of the crate file). Closes #7791 Closes #11056 Closes #11667
2014-02-03 15:27:54 -08:00
sess.opts.output_types,
outputs));
}
}
/// Run the linker on any artifacts that resulted from the LLVM run.
/// This should produce either a finished executable or library.
pub fn phase_6_link_output(sess: Session,
trans: &CrateTranslation,
outputs: &OutputFilenames) {
time(sess.time_passes(), "linking", (), |_|
link::link_binary(sess,
Store metadata separately in rlib files Right now whenever an rlib file is linked against, all of the metadata from the rlib is pulled in to the final staticlib or binary. The reason for this is that the metadata is currently stored in a section of the object file. Note that this is intentional for dynamic libraries in order to distribute metadata bundled with static libraries. This commit alters the situation for rlib libraries to instead store the metadata in a separate file in the archive. In doing so, when the archive is passed to the linker, none of the metadata will get pulled into the result executable. Furthermore, the metadata file is skipped when assembling rlibs into an archive. The snag in this implementation comes with multiple output formats. When generating a dylib, the metadata needs to be in the object file, but when generating an rlib this needs to be separate. In order to accomplish this, the metadata variable is inserted into an entirely separate LLVM Module which is then codegen'd into a different location (foo.metadata.o). This is then linked into dynamic libraries and silently ignored for rlib files. While changing how metadata is inserted into archives, I have also stopped compressing metadata when inserted into rlib files. We have wanted to stop compressing metadata, but the sections it creates in object file sections are apparently too large. Thankfully if it's just an arbitrary file it doesn't matter how large it is. I have seen massive reductions in executable sizes, as well as staticlib output sizes (to confirm that this is all working).
2013-12-03 17:41:01 -08:00
trans,
Redesign output flags for rustc This commit removes the -c, --emit-llvm, -s, --rlib, --dylib, --staticlib, --lib, and --bin flags from rustc, adding the following flags: * --emit=[asm,ir,bc,obj,link] * --crate-type=[dylib,rlib,staticlib,bin,lib] The -o option has also been redefined to be used for *all* flavors of outputs. This means that we no longer ignore it for libraries. The --out-dir remains the same as before. The new logic for files that rustc emits is as follows: 1. Output types are dictated by the --emit flag. The default value is --emit=link, and this option can be passed multiple times and have all options stacked on one another. 2. Crate types are dictated by the --crate-type flag and the #[crate_type] attribute. The flags can be passed many times and stack with the crate attribute. 3. If the -o flag is specified, and only one output type is specified, the output will be emitted at this location. If more than one output type is specified, then the filename of -o is ignored, and all output goes in the directory that -o specifies. The -o option always ignores the --out-dir option. 4. If the --out-dir flag is specified, all output goes in this directory. 5. If -o and --out-dir are both not present, all output goes in the current directory of the process. 6. When multiple output types are specified, the filestem of all output is the same as the name of the CrateId (derived from a crate attribute or from the filestem of the crate file). Closes #7791 Closes #11056 Closes #11667
2014-02-03 15:27:54 -08:00
outputs,
&trans.link));
}
pub fn stop_after_phase_3(sess: Session) -> bool {
if sess.opts.no_trans {
debug!("invoked with --no-trans, returning early from compile_input");
return true;
}
return false;
}
pub fn stop_after_phase_1(sess: Session) -> bool {
if sess.opts.parse_only {
debug!("invoked with --parse-only, returning early from compile_input");
return true;
}
return sess.opts.debugging_opts & session::AST_JSON_NOEXPAND != 0;
}
pub fn stop_after_phase_2(sess: Session) -> bool {
if sess.opts.no_analysis {
debug!("invoked with --no-analysis, returning early from compile_input");
return true;
}
return sess.opts.debugging_opts & session::AST_JSON != 0;
}
pub fn stop_after_phase_5(sess: Session) -> bool {
Redesign output flags for rustc This commit removes the -c, --emit-llvm, -s, --rlib, --dylib, --staticlib, --lib, and --bin flags from rustc, adding the following flags: * --emit=[asm,ir,bc,obj,link] * --crate-type=[dylib,rlib,staticlib,bin,lib] The -o option has also been redefined to be used for *all* flavors of outputs. This means that we no longer ignore it for libraries. The --out-dir remains the same as before. The new logic for files that rustc emits is as follows: 1. Output types are dictated by the --emit flag. The default value is --emit=link, and this option can be passed multiple times and have all options stacked on one another. 2. Crate types are dictated by the --crate-type flag and the #[crate_type] attribute. The flags can be passed many times and stack with the crate attribute. 3. If the -o flag is specified, and only one output type is specified, the output will be emitted at this location. If more than one output type is specified, then the filename of -o is ignored, and all output goes in the directory that -o specifies. The -o option always ignores the --out-dir option. 4. If the --out-dir flag is specified, all output goes in this directory. 5. If -o and --out-dir are both not present, all output goes in the current directory of the process. 6. When multiple output types are specified, the filestem of all output is the same as the name of the CrateId (derived from a crate attribute or from the filestem of the crate file). Closes #7791 Closes #11056 Closes #11667
2014-02-03 15:27:54 -08:00
if !sess.opts.output_types.iter().any(|&i| i == link::OutputTypeExe) {
debug!("not building executable, returning early from compile_input");
return true;
}
return false;
}
Redesign output flags for rustc This commit removes the -c, --emit-llvm, -s, --rlib, --dylib, --staticlib, --lib, and --bin flags from rustc, adding the following flags: * --emit=[asm,ir,bc,obj,link] * --crate-type=[dylib,rlib,staticlib,bin,lib] The -o option has also been redefined to be used for *all* flavors of outputs. This means that we no longer ignore it for libraries. The --out-dir remains the same as before. The new logic for files that rustc emits is as follows: 1. Output types are dictated by the --emit flag. The default value is --emit=link, and this option can be passed multiple times and have all options stacked on one another. 2. Crate types are dictated by the --crate-type flag and the #[crate_type] attribute. The flags can be passed many times and stack with the crate attribute. 3. If the -o flag is specified, and only one output type is specified, the output will be emitted at this location. If more than one output type is specified, then the filename of -o is ignored, and all output goes in the directory that -o specifies. The -o option always ignores the --out-dir option. 4. If the --out-dir flag is specified, all output goes in this directory. 5. If -o and --out-dir are both not present, all output goes in the current directory of the process. 6. When multiple output types are specified, the filestem of all output is the same as the name of the CrateId (derived from a crate attribute or from the filestem of the crate file). Closes #7791 Closes #11056 Closes #11667
2014-02-03 15:27:54 -08:00
fn write_out_deps(sess: Session,
input: &Input,
outputs: &OutputFilenames,
krate: &ast::Crate) -> io::IoResult<()> {
let lm = link::build_link_meta(krate.attrs, outputs,
2014-01-29 18:42:19 -08:00
&mut ::util::sha2::Sha256::new());
Redesign output flags for rustc This commit removes the -c, --emit-llvm, -s, --rlib, --dylib, --staticlib, --lib, and --bin flags from rustc, adding the following flags: * --emit=[asm,ir,bc,obj,link] * --crate-type=[dylib,rlib,staticlib,bin,lib] The -o option has also been redefined to be used for *all* flavors of outputs. This means that we no longer ignore it for libraries. The --out-dir remains the same as before. The new logic for files that rustc emits is as follows: 1. Output types are dictated by the --emit flag. The default value is --emit=link, and this option can be passed multiple times and have all options stacked on one another. 2. Crate types are dictated by the --crate-type flag and the #[crate_type] attribute. The flags can be passed many times and stack with the crate attribute. 3. If the -o flag is specified, and only one output type is specified, the output will be emitted at this location. If more than one output type is specified, then the filename of -o is ignored, and all output goes in the directory that -o specifies. The -o option always ignores the --out-dir option. 4. If the --out-dir flag is specified, all output goes in this directory. 5. If -o and --out-dir are both not present, all output goes in the current directory of the process. 6. When multiple output types are specified, the filestem of all output is the same as the name of the CrateId (derived from a crate attribute or from the filestem of the crate file). Closes #7791 Closes #11056 Closes #11667
2014-02-03 15:27:54 -08:00
let mut out_filenames = ~[];
for output_type in sess.opts.output_types.iter() {
let file = outputs.path(*output_type);
match *output_type {
link::OutputTypeExe => {
let crate_types = sess.crate_types.borrow();
for output in crate_types.get().iter() {
let p = link::filename_for_input(&sess, *output, &lm, &file);
out_filenames.push(p);
}
}
_ => { out_filenames.push(file); }
}
}
2014-01-29 18:42:19 -08:00
// Write out dependency rules to the dep-info file if requested with
// --dep-info
let deps_filename = match sess.opts.write_dependency_info {
// Use filename from --dep-file argument if given
(true, Some(ref filename)) => filename.clone(),
2014-01-29 18:42:19 -08:00
// Use default filename: crate source filename with extension replaced
// by ".d"
(true, None) => match *input {
Redesign output flags for rustc This commit removes the -c, --emit-llvm, -s, --rlib, --dylib, --staticlib, --lib, and --bin flags from rustc, adding the following flags: * --emit=[asm,ir,bc,obj,link] * --crate-type=[dylib,rlib,staticlib,bin,lib] The -o option has also been redefined to be used for *all* flavors of outputs. This means that we no longer ignore it for libraries. The --out-dir remains the same as before. The new logic for files that rustc emits is as follows: 1. Output types are dictated by the --emit flag. The default value is --emit=link, and this option can be passed multiple times and have all options stacked on one another. 2. Crate types are dictated by the --crate-type flag and the #[crate_type] attribute. The flags can be passed many times and stack with the crate attribute. 3. If the -o flag is specified, and only one output type is specified, the output will be emitted at this location. If more than one output type is specified, then the filename of -o is ignored, and all output goes in the directory that -o specifies. The -o option always ignores the --out-dir option. 4. If the --out-dir flag is specified, all output goes in this directory. 5. If -o and --out-dir are both not present, all output goes in the current directory of the process. 6. When multiple output types are specified, the filestem of all output is the same as the name of the CrateId (derived from a crate attribute or from the filestem of the crate file). Closes #7791 Closes #11056 Closes #11667
2014-02-03 15:27:54 -08:00
FileInput(..) => outputs.with_extension("d"),
StrInput(..) => {
2014-01-29 18:42:19 -08:00
sess.warn("can not write --dep-info without a filename \
when compiling stdin.");
return Ok(());
},
},
2014-01-29 18:42:19 -08:00
_ => return Ok(()),
};
// Build a list of files used to compile the output and
// write Makefile-compatible dependency rules
2014-01-15 16:42:51 -08:00
let files: ~[~str] = {
2013-12-30 16:30:33 -08:00
let files = sess.codemap.files.borrow();
files.get()
.iter()
.filter_map(|fmap| {
if fmap.is_real_file() {
2014-01-15 16:42:51 -08:00
Some(fmap.name.clone())
2013-12-30 16:30:33 -08:00
} else {
None
}
})
.collect()
};
2014-01-29 18:42:19 -08:00
let mut file = if_ok!(io::File::create(&deps_filename));
for path in out_filenames.iter() {
2014-01-29 18:42:19 -08:00
if_ok!(write!(&mut file as &mut Writer,
"{}: {}\n\n", path.display(), files.connect(" ")));
}
2014-01-29 18:42:19 -08:00
Ok(())
}
pub fn compile_input(sess: Session, cfg: ast::CrateConfig, input: &Input,
outdir: &Option<Path>, output: &Option<Path>) {
// We need nested scopes here, because the intermediate results can keep
// large chunks of memory alive and we want to free them as soon as
// possible to keep the peak memory usage low
let (outputs, trans) = {
2014-01-06 14:00:46 +02:00
let (expanded_crate, ast_map) = {
let krate = phase_1_parse_input(sess, cfg, input);
2014-02-07 19:50:07 +09:00
if sess.show_span() {
front::show_span::run(sess, &krate);
2014-02-07 19:50:07 +09:00
return;
}
if stop_after_phase_1(sess) { return; }
2013-12-25 11:10:33 -07:00
let loader = &mut Loader::new(sess);
phase_2_configure_and_expand(sess, loader, krate)
};
let outputs = build_output_filenames(input, outdir, output,
expanded_crate.attrs, sess);
Redesign output flags for rustc This commit removes the -c, --emit-llvm, -s, --rlib, --dylib, --staticlib, --lib, and --bin flags from rustc, adding the following flags: * --emit=[asm,ir,bc,obj,link] * --crate-type=[dylib,rlib,staticlib,bin,lib] The -o option has also been redefined to be used for *all* flavors of outputs. This means that we no longer ignore it for libraries. The --out-dir remains the same as before. The new logic for files that rustc emits is as follows: 1. Output types are dictated by the --emit flag. The default value is --emit=link, and this option can be passed multiple times and have all options stacked on one another. 2. Crate types are dictated by the --crate-type flag and the #[crate_type] attribute. The flags can be passed many times and stack with the crate attribute. 3. If the -o flag is specified, and only one output type is specified, the output will be emitted at this location. If more than one output type is specified, then the filename of -o is ignored, and all output goes in the directory that -o specifies. The -o option always ignores the --out-dir option. 4. If the --out-dir flag is specified, all output goes in this directory. 5. If -o and --out-dir are both not present, all output goes in the current directory of the process. 6. When multiple output types are specified, the filestem of all output is the same as the name of the CrateId (derived from a crate attribute or from the filestem of the crate file). Closes #7791 Closes #11056 Closes #11667
2014-02-03 15:27:54 -08:00
write_out_deps(sess, input, &outputs, &expanded_crate).unwrap();
if stop_after_phase_2(sess) { return; }
2014-01-06 14:00:46 +02:00
let analysis = phase_3_run_analysis_passes(sess, &expanded_crate, ast_map);
2013-12-19 10:18:37 -05:00
if stop_after_phase_3(sess) { return; }
let trans = phase_4_translate_to_llvm(sess, expanded_crate,
Redesign output flags for rustc This commit removes the -c, --emit-llvm, -s, --rlib, --dylib, --staticlib, --lib, and --bin flags from rustc, adding the following flags: * --emit=[asm,ir,bc,obj,link] * --crate-type=[dylib,rlib,staticlib,bin,lib] The -o option has also been redefined to be used for *all* flavors of outputs. This means that we no longer ignore it for libraries. The --out-dir remains the same as before. The new logic for files that rustc emits is as follows: 1. Output types are dictated by the --emit flag. The default value is --emit=link, and this option can be passed multiple times and have all options stacked on one another. 2. Crate types are dictated by the --crate-type flag and the #[crate_type] attribute. The flags can be passed many times and stack with the crate attribute. 3. If the -o flag is specified, and only one output type is specified, the output will be emitted at this location. If more than one output type is specified, then the filename of -o is ignored, and all output goes in the directory that -o specifies. The -o option always ignores the --out-dir option. 4. If the --out-dir flag is specified, all output goes in this directory. 5. If -o and --out-dir are both not present, all output goes in the current directory of the process. 6. When multiple output types are specified, the filestem of all output is the same as the name of the CrateId (derived from a crate attribute or from the filestem of the crate file). Closes #7791 Closes #11056 Closes #11667
2014-02-03 15:27:54 -08:00
&analysis, &outputs);
(outputs, trans)
};
Redesign output flags for rustc This commit removes the -c, --emit-llvm, -s, --rlib, --dylib, --staticlib, --lib, and --bin flags from rustc, adding the following flags: * --emit=[asm,ir,bc,obj,link] * --crate-type=[dylib,rlib,staticlib,bin,lib] The -o option has also been redefined to be used for *all* flavors of outputs. This means that we no longer ignore it for libraries. The --out-dir remains the same as before. The new logic for files that rustc emits is as follows: 1. Output types are dictated by the --emit flag. The default value is --emit=link, and this option can be passed multiple times and have all options stacked on one another. 2. Crate types are dictated by the --crate-type flag and the #[crate_type] attribute. The flags can be passed many times and stack with the crate attribute. 3. If the -o flag is specified, and only one output type is specified, the output will be emitted at this location. If more than one output type is specified, then the filename of -o is ignored, and all output goes in the directory that -o specifies. The -o option always ignores the --out-dir option. 4. If the --out-dir flag is specified, all output goes in this directory. 5. If -o and --out-dir are both not present, all output goes in the current directory of the process. 6. When multiple output types are specified, the filestem of all output is the same as the name of the CrateId (derived from a crate attribute or from the filestem of the crate file). Closes #7791 Closes #11056 Closes #11667
2014-02-03 15:27:54 -08:00
phase_5_run_llvm_passes(sess, &trans, &outputs);
if stop_after_phase_5(sess) { return; }
Redesign output flags for rustc This commit removes the -c, --emit-llvm, -s, --rlib, --dylib, --staticlib, --lib, and --bin flags from rustc, adding the following flags: * --emit=[asm,ir,bc,obj,link] * --crate-type=[dylib,rlib,staticlib,bin,lib] The -o option has also been redefined to be used for *all* flavors of outputs. This means that we no longer ignore it for libraries. The --out-dir remains the same as before. The new logic for files that rustc emits is as follows: 1. Output types are dictated by the --emit flag. The default value is --emit=link, and this option can be passed multiple times and have all options stacked on one another. 2. Crate types are dictated by the --crate-type flag and the #[crate_type] attribute. The flags can be passed many times and stack with the crate attribute. 3. If the -o flag is specified, and only one output type is specified, the output will be emitted at this location. If more than one output type is specified, then the filename of -o is ignored, and all output goes in the directory that -o specifies. The -o option always ignores the --out-dir option. 4. If the --out-dir flag is specified, all output goes in this directory. 5. If -o and --out-dir are both not present, all output goes in the current directory of the process. 6. When multiple output types are specified, the filestem of all output is the same as the name of the CrateId (derived from a crate attribute or from the filestem of the crate file). Closes #7791 Closes #11056 Closes #11667
2014-02-03 15:27:54 -08:00
phase_6_link_output(sess, &trans, &outputs);
}
2014-02-07 00:38:33 +02:00
struct IdentifiedAnnotation;
impl pprust::PpAnn for IdentifiedAnnotation {
2014-01-29 18:42:19 -08:00
fn pre(&self, node: pprust::AnnNode) -> io::IoResult<()> {
2012-08-06 12:34:08 -07:00
match node {
pprust::NodeExpr(s, _) => pprust::popen(s),
2014-01-29 18:42:19 -08:00
_ => Ok(())
}
}
2014-01-29 18:42:19 -08:00
fn post(&self, node: pprust::AnnNode) -> io::IoResult<()> {
match node {
pprust::NodeItem(s, item) => {
2014-01-29 18:42:19 -08:00
if_ok!(pp::space(&mut s.s));
if_ok!(pprust::synth_comment(s, item.id.to_str()));
}
pprust::NodeBlock(s, blk) => {
2014-01-29 18:42:19 -08:00
if_ok!(pp::space(&mut s.s));
if_ok!(pprust::synth_comment(s, ~"block " + blk.id.to_str()));
}
pprust::NodeExpr(s, expr) => {
2014-01-29 18:42:19 -08:00
if_ok!(pp::space(&mut s.s));
if_ok!(pprust::synth_comment(s, expr.id.to_str()));
if_ok!(pprust::pclose(s));
}
pprust::NodePat(s, pat) => {
2014-01-29 18:42:19 -08:00
if_ok!(pp::space(&mut s.s));
if_ok!(pprust::synth_comment(s, ~"pat " + pat.id.to_str()));
}
2012-08-03 19:59:04 -07:00
}
2014-01-29 18:42:19 -08:00
Ok(())
}
}
struct TypedAnnotation {
analysis: CrateAnalysis,
}
impl pprust::PpAnn for TypedAnnotation {
2014-01-29 18:42:19 -08:00
fn pre(&self, node: pprust::AnnNode) -> io::IoResult<()> {
match node {
pprust::NodeExpr(s, _) => pprust::popen(s),
2014-01-29 18:42:19 -08:00
_ => Ok(())
}
}
2014-01-29 18:42:19 -08:00
fn post(&self, node: pprust::AnnNode) -> io::IoResult<()> {
let tcx = self.analysis.ty_cx;
match node {
pprust::NodeExpr(s, expr) => {
2014-01-29 18:42:19 -08:00
if_ok!(pp::space(&mut s.s));
if_ok!(pp::word(&mut s.s, "as"));
if_ok!(pp::space(&mut s.s));
if_ok!(pp::word(&mut s.s,
ppaux::ty_to_str(tcx, ty::expr_ty(tcx, expr))));
if_ok!(pprust::pclose(s));
}
_ => ()
}
2014-01-29 18:42:19 -08:00
Ok(())
}
}
pub fn pretty_print_input(sess: Session,
cfg: ast::CrateConfig,
input: &Input,
ppm: PpMode) {
let krate = phase_1_parse_input(sess, cfg, input);
let (krate, ast_map, is_expanded) = match ppm {
PpmExpanded | PpmExpandedIdentified | PpmTyped => {
2013-12-25 11:10:33 -07:00
let loader = &mut Loader::new(sess);
let (krate, ast_map) = phase_2_configure_and_expand(sess, loader, krate);
(krate, Some(ast_map), true)
}
_ => (krate, None, false)
};
let annotation = match ppm {
PpmIdentified | PpmExpandedIdentified => {
2014-02-07 00:38:33 +02:00
~IdentifiedAnnotation as ~pprust::PpAnn
}
PpmTyped => {
2014-01-06 14:00:46 +02:00
let ast_map = ast_map.expect("--pretty=typed missing ast_map");
let analysis = phase_3_run_analysis_passes(sess, &krate, ast_map);
2014-02-07 00:38:33 +02:00
~TypedAnnotation {
analysis: analysis
2014-02-07 00:38:33 +02:00
} as ~pprust::PpAnn:
}
2014-02-07 00:38:33 +02:00
_ => ~pprust::NoAnn as ~pprust::PpAnn:,
};
let src = &sess.codemap.get_filemap(source_name(input)).src;
let mut rdr = MemReader::new(src.as_bytes().to_owned());
let stdout = io::stdout();
pprust::print_crate(sess.codemap,
sess.span_diagnostic,
&krate,
source_name(input),
&mut rdr,
2013-12-27 14:28:54 -08:00
~stdout as ~io::Writer,
annotation,
2014-01-29 18:42:19 -08:00
is_expanded).unwrap();
}
pub fn get_os(triple: &str) -> Option<abi::Os> {
for &(name, os) in os_names.iter() {
2013-06-15 00:43:19 -07:00
if triple.contains(name) { return Some(os) }
}
None
}
static os_names : &'static [(&'static str, abi::Os)] = &'static [
("mingw32", abi::OsWin32),
("win32", abi::OsWin32),
("darwin", abi::OsMacos),
("android", abi::OsAndroid),
("linux", abi::OsLinux),
("freebsd", abi::OsFreebsd)];
pub fn get_arch(triple: &str) -> Option<abi::Architecture> {
for &(arch, abi) in architecture_abis.iter() {
2013-06-15 00:43:19 -07:00
if triple.contains(arch) { return Some(abi) }
}
None
}
2013-06-15 00:43:19 -07:00
static architecture_abis : &'static [(&'static str, abi::Architecture)] = &'static [
("i386", abi::X86),
("i486", abi::X86),
("i586", abi::X86),
("i686", abi::X86),
("i786", abi::X86),
("x86_64", abi::X86_64),
("arm", abi::Arm),
("xscale", abi::Arm),
2014-01-21 14:47:14 +08:00
("thumb", abi::Arm),
2013-06-15 00:43:19 -07:00
("mips", abi::Mips)];
2014-02-07 00:38:33 +02:00
pub fn build_target_config(sopts: @session::Options)
-> @session::Config {
2012-08-06 12:34:08 -07:00
let os = match get_os(sopts.target_triple) {
2012-08-20 12:23:37 -07:00
Some(os) => os,
2014-02-07 00:38:33 +02:00
None => early_error("unknown operating system")
};
2012-08-06 12:34:08 -07:00
let arch = match get_arch(sopts.target_triple) {
2012-08-20 12:23:37 -07:00
Some(arch) => arch,
2014-02-07 00:38:33 +02:00
None => early_error("unknown architecture: " + sopts.target_triple)
};
let (int_type, uint_type) = match arch {
abi::X86 => (ast::TyI32, ast::TyU32),
abi::X86_64 => (ast::TyI64, ast::TyU64),
abi::Arm => (ast::TyI32, ast::TyU32),
abi::Mips => (ast::TyI32, ast::TyU32)
};
let target_triple = sopts.target_triple.clone();
2012-08-06 12:34:08 -07:00
let target_strs = match arch {
abi::X86 => x86::get_target_strs(target_triple, os),
abi::X86_64 => x86_64::get_target_strs(target_triple, os),
abi::Arm => arm::get_target_strs(target_triple, os),
abi::Mips => mips::get_target_strs(target_triple, os)
};
let target_cfg = @session::Config {
os: os,
arch: arch,
target_strs: target_strs,
int_type: int_type,
uint_type: uint_type,
};
2012-08-01 17:30:05 -07:00
return target_cfg;
}
pub fn host_triple() -> ~str {
// Get the host triple out of the build environment. This ensures that our
// idea of the host triple is the same as for the set of libraries we've
// actually built. We can't just take LLVM's host triple because they
// normalize all ix86 architectures to i386.
//
// Instead of grabbing the host triple (for the current host), we grab (at
// compile time) the target triple that this rustc is built with and
// calling that (at runtime) the host triple.
2013-10-21 13:18:21 +04:00
(env!("CFG_COMPILER")).to_owned()
}
2014-02-11 01:10:26 +09:00
pub fn build_session_options(matches: &getopts::Matches)
-> @session::Options {
Redesign output flags for rustc This commit removes the -c, --emit-llvm, -s, --rlib, --dylib, --staticlib, --lib, and --bin flags from rustc, adding the following flags: * --emit=[asm,ir,bc,obj,link] * --crate-type=[dylib,rlib,staticlib,bin,lib] The -o option has also been redefined to be used for *all* flavors of outputs. This means that we no longer ignore it for libraries. The --out-dir remains the same as before. The new logic for files that rustc emits is as follows: 1. Output types are dictated by the --emit flag. The default value is --emit=link, and this option can be passed multiple times and have all options stacked on one another. 2. Crate types are dictated by the --crate-type flag and the #[crate_type] attribute. The flags can be passed many times and stack with the crate attribute. 3. If the -o flag is specified, and only one output type is specified, the output will be emitted at this location. If more than one output type is specified, then the filename of -o is ignored, and all output goes in the directory that -o specifies. The -o option always ignores the --out-dir option. 4. If the --out-dir flag is specified, all output goes in this directory. 5. If -o and --out-dir are both not present, all output goes in the current directory of the process. 6. When multiple output types are specified, the filestem of all output is the same as the name of the CrateId (derived from a crate attribute or from the filestem of the crate file). Closes #7791 Closes #11056 Closes #11667
2014-02-03 15:27:54 -08:00
let crate_types = matches.opt_strs("crate-type").flat_map(|s| {
s.split(',').map(|part| {
match part {
"lib" => session::default_lib_output(),
"rlib" => session::CrateTypeRlib,
"staticlib" => session::CrateTypeStaticlib,
"dylib" => session::CrateTypeDylib,
"bin" => session::CrateTypeExecutable,
2014-02-07 00:38:33 +02:00
_ => early_error(format!("unknown crate type: `{}`", part))
Redesign output flags for rustc This commit removes the -c, --emit-llvm, -s, --rlib, --dylib, --staticlib, --lib, and --bin flags from rustc, adding the following flags: * --emit=[asm,ir,bc,obj,link] * --crate-type=[dylib,rlib,staticlib,bin,lib] The -o option has also been redefined to be used for *all* flavors of outputs. This means that we no longer ignore it for libraries. The --out-dir remains the same as before. The new logic for files that rustc emits is as follows: 1. Output types are dictated by the --emit flag. The default value is --emit=link, and this option can be passed multiple times and have all options stacked on one another. 2. Crate types are dictated by the --crate-type flag and the #[crate_type] attribute. The flags can be passed many times and stack with the crate attribute. 3. If the -o flag is specified, and only one output type is specified, the output will be emitted at this location. If more than one output type is specified, then the filename of -o is ignored, and all output goes in the directory that -o specifies. The -o option always ignores the --out-dir option. 4. If the --out-dir flag is specified, all output goes in this directory. 5. If -o and --out-dir are both not present, all output goes in the current directory of the process. 6. When multiple output types are specified, the filestem of all output is the same as the name of the CrateId (derived from a crate attribute or from the filestem of the crate file). Closes #7791 Closes #11056 Closes #11667
2014-02-03 15:27:54 -08:00
}
}).collect()
});
Add generation of static libraries to rustc This commit implements the support necessary for generating both intermediate and result static rust libraries. This is an implementation of my thoughts in https://mail.mozilla.org/pipermail/rust-dev/2013-November/006686.html. When compiling a library, we still retain the "lib" option, although now there are "rlib", "staticlib", and "dylib" as options for crate_type (and these are stackable). The idea of "lib" is to generate the "compiler default" instead of having too choose (although all are interchangeable). For now I have left the "complier default" to be a dynamic library for size reasons. Of the rust libraries, lib{std,extra,rustuv} will bootstrap with an rlib/dylib pair, but lib{rustc,syntax,rustdoc,rustpkg} will only be built as a dynamic object. I chose this for size reasons, but also because you're probably not going to be embedding the rustc compiler anywhere any time soon. Other than the options outlined above, there are a few defaults/preferences that are now opinionated in the compiler: * If both a .dylib and .rlib are found for a rust library, the compiler will prefer the .rlib variant. This is overridable via the -Z prefer-dynamic option * If generating a "lib", the compiler will generate a dynamic library. This is overridable by explicitly saying what flavor you'd like (rlib, staticlib, dylib). * If no options are passed to the command line, and no crate_type is found in the destination crate, then an executable is generated With this change, you can successfully build a rust program with 0 dynamic dependencies on rust libraries. There is still a dynamic dependency on librustrt, but I plan on removing that in a subsequent commit. This change includes no tests just yet. Our current testing infrastructure/harnesses aren't very amenable to doing flavorful things with linking, so I'm planning on adding a new mode of testing which I believe belongs as a separate commit. Closes #552
2013-11-15 14:03:29 -08:00
let parse_only = matches.opt_present("parse-only");
let no_trans = matches.opt_present("no-trans");
let no_analysis = matches.opt_present("no-analysis");
let lint_levels = [lint::allow, lint::warn,
lint::deny, lint::forbid];
let mut lint_opts = ~[];
let lint_dict = lint::get_lint_dict();
for level in lint_levels.iter() {
let level_name = lint::level_to_str(*level);
let level_short = level_name.slice_chars(0, 1);
let level_short = level_short.to_ascii().to_upper().into_str();
let flags = vec::append(matches.opt_strs(level_short),
matches.opt_strs(level_name));
for lint_name in flags.iter() {
2013-06-11 21:46:40 +10:00
let lint_name = lint_name.replace("-", "_");
match lint_dict.find_equiv(&lint_name) {
2012-08-20 12:23:37 -07:00
None => {
2014-02-07 00:38:33 +02:00
early_error(format!("unknown {} flag: {}",
level_name, lint_name));
}
2012-08-20 12:23:37 -07:00
Some(lint) => {
lint_opts.push((lint.lint, *level));
}
}
}
}
let mut debugging_opts = 0;
let debug_flags = matches.opt_strs("Z");
let debug_map = session::debugging_opts_map();
for debug_flag in debug_flags.iter() {
let mut this_bit = 0;
for tuple in debug_map.iter() {
let (name, bit) = match *tuple { (ref a, _, b) => (a, b) };
if *name == *debug_flag { this_bit = bit; break; }
}
if this_bit == 0 {
2014-02-07 00:38:33 +02:00
early_error(format!("unknown debug flag: {}", *debug_flag))
}
debugging_opts |= this_bit;
}
if debugging_opts & session::DEBUG_LLVM != 0 {
unsafe { llvm::LLVMSetDebug(1); }
}
Redesign output flags for rustc This commit removes the -c, --emit-llvm, -s, --rlib, --dylib, --staticlib, --lib, and --bin flags from rustc, adding the following flags: * --emit=[asm,ir,bc,obj,link] * --crate-type=[dylib,rlib,staticlib,bin,lib] The -o option has also been redefined to be used for *all* flavors of outputs. This means that we no longer ignore it for libraries. The --out-dir remains the same as before. The new logic for files that rustc emits is as follows: 1. Output types are dictated by the --emit flag. The default value is --emit=link, and this option can be passed multiple times and have all options stacked on one another. 2. Crate types are dictated by the --crate-type flag and the #[crate_type] attribute. The flags can be passed many times and stack with the crate attribute. 3. If the -o flag is specified, and only one output type is specified, the output will be emitted at this location. If more than one output type is specified, then the filename of -o is ignored, and all output goes in the directory that -o specifies. The -o option always ignores the --out-dir option. 4. If the --out-dir flag is specified, all output goes in this directory. 5. If -o and --out-dir are both not present, all output goes in the current directory of the process. 6. When multiple output types are specified, the filestem of all output is the same as the name of the CrateId (derived from a crate attribute or from the filestem of the crate file). Closes #7791 Closes #11056 Closes #11667
2014-02-03 15:27:54 -08:00
let mut output_types = if parse_only || no_trans {
~[]
} else {
matches.opt_strs("emit").flat_map(|s| {
s.split(',').map(|part| {
match part.as_slice() {
"asm" => link::OutputTypeAssembly,
"ir" => link::OutputTypeLlvmAssembly,
"bc" => link::OutputTypeBitcode,
"obj" => link::OutputTypeObject,
"link" => link::OutputTypeExe,
2014-02-07 00:38:33 +02:00
_ => early_error(format!("unknown emission type: `{}`", part))
Redesign output flags for rustc This commit removes the -c, --emit-llvm, -s, --rlib, --dylib, --staticlib, --lib, and --bin flags from rustc, adding the following flags: * --emit=[asm,ir,bc,obj,link] * --crate-type=[dylib,rlib,staticlib,bin,lib] The -o option has also been redefined to be used for *all* flavors of outputs. This means that we no longer ignore it for libraries. The --out-dir remains the same as before. The new logic for files that rustc emits is as follows: 1. Output types are dictated by the --emit flag. The default value is --emit=link, and this option can be passed multiple times and have all options stacked on one another. 2. Crate types are dictated by the --crate-type flag and the #[crate_type] attribute. The flags can be passed many times and stack with the crate attribute. 3. If the -o flag is specified, and only one output type is specified, the output will be emitted at this location. If more than one output type is specified, then the filename of -o is ignored, and all output goes in the directory that -o specifies. The -o option always ignores the --out-dir option. 4. If the --out-dir flag is specified, all output goes in this directory. 5. If -o and --out-dir are both not present, all output goes in the current directory of the process. 6. When multiple output types are specified, the filestem of all output is the same as the name of the CrateId (derived from a crate attribute or from the filestem of the crate file). Closes #7791 Closes #11056 Closes #11667
2014-02-03 15:27:54 -08:00
}
}).collect()
})
};
output_types.sort();
output_types.dedup();
if output_types.len() == 0 {
output_types.push(link::OutputTypeExe);
}
let sysroot_opt = matches.opt_str("sysroot").map(|m| @Path::new(m));
let target = matches.opt_str("target").unwrap_or(host_triple());
let opt_level = {
if (debugging_opts & session::NO_OPT) != 0 {
No
} else if matches.opt_present("O") {
if matches.opt_present("opt-level") {
2014-02-07 00:38:33 +02:00
early_error("-O and --opt-level both provided");
}
2012-08-21 17:22:45 -07:00
Default
} else if matches.opt_present("opt-level") {
match matches.opt_str("opt-level").unwrap() {
2012-08-21 17:22:45 -07:00
~"0" => No,
~"1" => Less,
~"2" => Default,
~"3" => Aggressive,
2012-08-03 19:59:04 -07:00
_ => {
2014-02-07 00:38:33 +02:00
early_error("optimization level needs to be between 0-3")
}
}
} else { No }
};
let gc = debugging_opts & session::GC != 0;
let debuginfo = matches.opt_present("g") || matches.opt_present("debuginfo");
let addl_lib_search_paths = matches.opt_strs("L").map(|s| {
Path::new(s.as_slice())
}).move_iter().collect();
2014-02-07 00:38:33 +02:00
let cfg = parse_cfgspecs(matches.opt_strs("cfg"));
let test = matches.opt_present("test");
let write_dependency_info = (matches.opt_present("dep-info"),
matches.opt_str("dep-info").map(|p| Path::new(p)));
2013-12-19 10:18:37 -05:00
let print_metas = (matches.opt_present("crate-id"),
matches.opt_present("crate-name"),
matches.opt_present("crate-file-name"));
let cg = build_codegen_options(matches);
let sopts = @session::Options {
Redesign output flags for rustc This commit removes the -c, --emit-llvm, -s, --rlib, --dylib, --staticlib, --lib, and --bin flags from rustc, adding the following flags: * --emit=[asm,ir,bc,obj,link] * --crate-type=[dylib,rlib,staticlib,bin,lib] The -o option has also been redefined to be used for *all* flavors of outputs. This means that we no longer ignore it for libraries. The --out-dir remains the same as before. The new logic for files that rustc emits is as follows: 1. Output types are dictated by the --emit flag. The default value is --emit=link, and this option can be passed multiple times and have all options stacked on one another. 2. Crate types are dictated by the --crate-type flag and the #[crate_type] attribute. The flags can be passed many times and stack with the crate attribute. 3. If the -o flag is specified, and only one output type is specified, the output will be emitted at this location. If more than one output type is specified, then the filename of -o is ignored, and all output goes in the directory that -o specifies. The -o option always ignores the --out-dir option. 4. If the --out-dir flag is specified, all output goes in this directory. 5. If -o and --out-dir are both not present, all output goes in the current directory of the process. 6. When multiple output types are specified, the filestem of all output is the same as the name of the CrateId (derived from a crate attribute or from the filestem of the crate file). Closes #7791 Closes #11056 Closes #11667
2014-02-03 15:27:54 -08:00
crate_types: crate_types,
gc: gc,
optimize: opt_level,
debuginfo: debuginfo,
lint_opts: lint_opts,
Redesign output flags for rustc This commit removes the -c, --emit-llvm, -s, --rlib, --dylib, --staticlib, --lib, and --bin flags from rustc, adding the following flags: * --emit=[asm,ir,bc,obj,link] * --crate-type=[dylib,rlib,staticlib,bin,lib] The -o option has also been redefined to be used for *all* flavors of outputs. This means that we no longer ignore it for libraries. The --out-dir remains the same as before. The new logic for files that rustc emits is as follows: 1. Output types are dictated by the --emit flag. The default value is --emit=link, and this option can be passed multiple times and have all options stacked on one another. 2. Crate types are dictated by the --crate-type flag and the #[crate_type] attribute. The flags can be passed many times and stack with the crate attribute. 3. If the -o flag is specified, and only one output type is specified, the output will be emitted at this location. If more than one output type is specified, then the filename of -o is ignored, and all output goes in the directory that -o specifies. The -o option always ignores the --out-dir option. 4. If the --out-dir flag is specified, all output goes in this directory. 5. If -o and --out-dir are both not present, all output goes in the current directory of the process. 6. When multiple output types are specified, the filestem of all output is the same as the name of the CrateId (derived from a crate attribute or from the filestem of the crate file). Closes #7791 Closes #11056 Closes #11667
2014-02-03 15:27:54 -08:00
output_types: output_types,
addl_lib_search_paths: @RefCell::new(addl_lib_search_paths),
maybe_sysroot: sysroot_opt,
target_triple: target,
cfg: cfg,
test: test,
parse_only: parse_only,
no_trans: no_trans,
no_analysis: no_analysis,
2013-03-05 13:12:23 +09:00
debugging_opts: debugging_opts,
write_dependency_info: write_dependency_info,
2013-12-19 10:18:37 -05:00
print_metas: print_metas,
cg: cg,
};
2012-08-01 17:30:05 -07:00
return sopts;
}
pub fn build_codegen_options(matches: &getopts::Matches)
-> session::CodegenOptions
{
let mut cg = session::basic_codegen_options();
for option in matches.opt_strs("C").move_iter() {
let mut iter = option.splitn('=', 1);
let key = iter.next().unwrap();
let value = iter.next();
let option_to_lookup = key.replace("-", "_");
let mut found = false;
for &(candidate, setter, _) in session::CG_OPTIONS.iter() {
if option_to_lookup.as_slice() != candidate { continue }
if !setter(&mut cg, value) {
match value {
Some(..) => early_error(format!("codegen option `{}` takes \
no value", key)),
None => early_error(format!("codegen option `{0}` requires \
a value (-C {0}=<value>)",
key))
}
}
found = true;
break;
}
if !found {
early_error(format!("unknown codegen option: `{}`", key));
}
}
return cg;
}
pub fn build_session(sopts: @session::Options,
2014-02-07 00:38:33 +02:00
local_crate_source_file: Option<Path>)
-> Session {
2012-11-12 18:24:56 -08:00
let codemap = @codemap::CodeMap::new();
2012-02-17 14:15:09 -08:00
let diagnostic_handler =
2014-02-07 00:38:33 +02:00
diagnostic::mk_handler();
2012-02-17 14:15:09 -08:00
let span_diagnostic_handler =
diagnostic::mk_span_handler(diagnostic_handler, codemap);
2014-02-07 00:38:33 +02:00
build_session_(sopts, local_crate_source_file, codemap, span_diagnostic_handler)
2012-02-17 14:15:09 -08:00
}
pub fn build_session_(sopts: @session::Options,
local_crate_source_file: Option<Path>,
codemap: @codemap::CodeMap,
2013-12-27 13:48:00 -08:00
span_diagnostic_handler: @diagnostic::SpanHandler)
-> Session {
2014-02-07 00:38:33 +02:00
let target_cfg = build_target_config(sopts);
let p_s = parse::new_parse_sess_special_handler(span_diagnostic_handler, codemap);
2013-12-20 20:00:58 -08:00
let cstore = @CStore::new(token::get_ident_interner());
let filesearch = @filesearch::FileSearch::new(
&sopts.maybe_sysroot,
sopts.target_triple,
sopts.addl_lib_search_paths);
// Make the path absolute, if necessary
let local_crate_source_file = local_crate_source_file.map(|path|
if path.is_absolute() {
path.clone()
} else {
os::getcwd().join(path.clone())
}
);
@Session_ {
targ_cfg: target_cfg,
opts: sopts,
cstore: cstore,
parse_sess: p_s,
codemap: codemap,
// For a library crate, this is always none
entry_fn: RefCell::new(None),
entry_type: Cell::new(None),
2013-12-25 11:10:33 -07:00
macro_registrar_fn: RefCell::new(None),
span_diagnostic: span_diagnostic_handler,
filesearch: filesearch,
building_library: Cell::new(false),
local_crate_source_file: local_crate_source_file,
working_dir: os::getcwd(),
lints: RefCell::new(HashMap::new()),
node_id: Cell::new(1),
Redesign output flags for rustc This commit removes the -c, --emit-llvm, -s, --rlib, --dylib, --staticlib, --lib, and --bin flags from rustc, adding the following flags: * --emit=[asm,ir,bc,obj,link] * --crate-type=[dylib,rlib,staticlib,bin,lib] The -o option has also been redefined to be used for *all* flavors of outputs. This means that we no longer ignore it for libraries. The --out-dir remains the same as before. The new logic for files that rustc emits is as follows: 1. Output types are dictated by the --emit flag. The default value is --emit=link, and this option can be passed multiple times and have all options stacked on one another. 2. Crate types are dictated by the --crate-type flag and the #[crate_type] attribute. The flags can be passed many times and stack with the crate attribute. 3. If the -o flag is specified, and only one output type is specified, the output will be emitted at this location. If more than one output type is specified, then the filename of -o is ignored, and all output goes in the directory that -o specifies. The -o option always ignores the --out-dir option. 4. If the --out-dir flag is specified, all output goes in this directory. 5. If -o and --out-dir are both not present, all output goes in the current directory of the process. 6. When multiple output types are specified, the filestem of all output is the same as the name of the CrateId (derived from a crate attribute or from the filestem of the crate file). Closes #7791 Closes #11056 Closes #11667
2014-02-03 15:27:54 -08:00
crate_types: @RefCell::new(~[]),
}
}
pub fn parse_pretty(sess: Session, name: &str) -> PpMode {
2012-08-06 12:34:08 -07:00
match name {
&"normal" => PpmNormal,
&"expanded" => PpmExpanded,
&"typed" => PpmTyped,
&"expanded,identified" => PpmExpandedIdentified,
&"identified" => PpmIdentified,
_ => {
sess.fatal("argument to `pretty` must be one of `normal`, \
`expanded`, `typed`, `identified`, \
or `expanded,identified`");
}
}
}
// rustc command line options
pub fn optgroups() -> ~[getopts::OptGroup] {
~[
Redesign output flags for rustc This commit removes the -c, --emit-llvm, -s, --rlib, --dylib, --staticlib, --lib, and --bin flags from rustc, adding the following flags: * --emit=[asm,ir,bc,obj,link] * --crate-type=[dylib,rlib,staticlib,bin,lib] The -o option has also been redefined to be used for *all* flavors of outputs. This means that we no longer ignore it for libraries. The --out-dir remains the same as before. The new logic for files that rustc emits is as follows: 1. Output types are dictated by the --emit flag. The default value is --emit=link, and this option can be passed multiple times and have all options stacked on one another. 2. Crate types are dictated by the --crate-type flag and the #[crate_type] attribute. The flags can be passed many times and stack with the crate attribute. 3. If the -o flag is specified, and only one output type is specified, the output will be emitted at this location. If more than one output type is specified, then the filename of -o is ignored, and all output goes in the directory that -o specifies. The -o option always ignores the --out-dir option. 4. If the --out-dir flag is specified, all output goes in this directory. 5. If -o and --out-dir are both not present, all output goes in the current directory of the process. 6. When multiple output types are specified, the filestem of all output is the same as the name of the CrateId (derived from a crate attribute or from the filestem of the crate file). Closes #7791 Closes #11056 Closes #11667
2014-02-03 15:27:54 -08:00
optflag("h", "help", "Display this message"),
optmulti("", "cfg", "Configure the compilation environment", "SPEC"),
optmulti("L", "", "Add a directory to the library search path", "PATH"),
optmulti("", "crate-type", "Comma separated list of types of crates for the \
compiler to emit",
"[bin|lib|rlib|dylib|staticlib]"),
optmulti("", "emit", "Comma separated list of types of output for the compiler
to emit",
"[asm|bc|ir|obj|link]"),
2013-12-19 10:18:37 -05:00
optflag("", "crate-id", "Output the crate id and exit"),
optflag("", "crate-name", "Output the crate name and exit"),
optflag("", "crate-file-name", "Output the file(s) that would be written if compilation \
continued and exit"),
optflag("", "ls", "List the symbols defined by a library crate"),
optflag("g", "debuginfo", "Emit DWARF debug info to the objects created"),
optflag("", "no-trans",
"Run all passes except translation; no output"),
optflag("", "no-analysis",
"Parse and expand the output, but run no analysis or produce \
output"),
optflag("O", "", "Equivalent to --opt-level=2"),
optopt("o", "", "Write output to <filename>", "FILENAME"),
optopt("", "opt-level",
"Optimize with possible levels 0-3", "LEVEL"),
optopt( "", "out-dir",
"Write output to compiler-chosen filename
in <dir>", "DIR"),
optflag("", "parse-only",
"Parse only; do not compile, assemble, or link"),
optflagopt("", "pretty",
"Pretty-print the input instead of compiling;
valid types are: normal (un-annotated source),
expanded (crates expanded),
typed (crates expanded, with type annotations),
or identified (fully parenthesized,
AST nodes and blocks with IDs)", "TYPE"),
optflagopt("", "dep-info",
"Output dependency info to <filename> after compiling", "FILENAME"),
optopt("", "sysroot",
"Override the system root", "PATH"),
optflag("", "test", "Build a test harness"),
optopt("", "target",
"Target triple cpu-manufacturer-kernel[-os]
2013-03-28 21:44:46 +01:00
to compile for (see chapter 3.4 of http://www.sourceware.org/autobook/
for details)", "TRIPLE"),
optmulti("W", "warn",
"Set lint warnings", "OPT"),
optmulti("A", "allow",
"Set lint allowed", "OPT"),
optmulti("D", "deny",
"Set lint denied", "OPT"),
optmulti("F", "forbid",
"Set lint forbidden", "OPT"),
optmulti("C", "codegen",
"Set a codegen option", "OPT[=VALUE]"),
optmulti("Z", "", "Set internal debugging options", "FLAG"),
optflag( "v", "version",
"Print version info and exit"),
]
}
pub struct OutputFilenames {
Redesign output flags for rustc This commit removes the -c, --emit-llvm, -s, --rlib, --dylib, --staticlib, --lib, and --bin flags from rustc, adding the following flags: * --emit=[asm,ir,bc,obj,link] * --crate-type=[dylib,rlib,staticlib,bin,lib] The -o option has also been redefined to be used for *all* flavors of outputs. This means that we no longer ignore it for libraries. The --out-dir remains the same as before. The new logic for files that rustc emits is as follows: 1. Output types are dictated by the --emit flag. The default value is --emit=link, and this option can be passed multiple times and have all options stacked on one another. 2. Crate types are dictated by the --crate-type flag and the #[crate_type] attribute. The flags can be passed many times and stack with the crate attribute. 3. If the -o flag is specified, and only one output type is specified, the output will be emitted at this location. If more than one output type is specified, then the filename of -o is ignored, and all output goes in the directory that -o specifies. The -o option always ignores the --out-dir option. 4. If the --out-dir flag is specified, all output goes in this directory. 5. If -o and --out-dir are both not present, all output goes in the current directory of the process. 6. When multiple output types are specified, the filestem of all output is the same as the name of the CrateId (derived from a crate attribute or from the filestem of the crate file). Closes #7791 Closes #11056 Closes #11667
2014-02-03 15:27:54 -08:00
out_directory: Path,
out_filestem: ~str,
single_output_file: Option<Path>,
}
impl OutputFilenames {
pub fn path(&self, flavor: link::OutputType) -> Path {
match self.single_output_file {
Some(ref path) => return path.clone(),
None => {}
}
self.temp_path(flavor)
}
pub fn temp_path(&self, flavor: link::OutputType) -> Path {
let base = self.out_directory.join(self.out_filestem.as_slice());
match flavor {
link::OutputTypeBitcode => base.with_extension("bc"),
link::OutputTypeAssembly => base.with_extension("s"),
link::OutputTypeLlvmAssembly => base.with_extension("ll"),
link::OutputTypeObject => base.with_extension("o"),
link::OutputTypeExe => base,
}
}
pub fn with_extension(&self, extension: &str) -> Path {
let stem = self.out_filestem.as_slice();
self.out_directory.join(stem).with_extension(extension)
}
}
pub fn build_output_filenames(input: &Input,
odir: &Option<Path>,
ofile: &Option<Path>,
attrs: &[ast::Attribute],
sess: Session)
Redesign output flags for rustc This commit removes the -c, --emit-llvm, -s, --rlib, --dylib, --staticlib, --lib, and --bin flags from rustc, adding the following flags: * --emit=[asm,ir,bc,obj,link] * --crate-type=[dylib,rlib,staticlib,bin,lib] The -o option has also been redefined to be used for *all* flavors of outputs. This means that we no longer ignore it for libraries. The --out-dir remains the same as before. The new logic for files that rustc emits is as follows: 1. Output types are dictated by the --emit flag. The default value is --emit=link, and this option can be passed multiple times and have all options stacked on one another. 2. Crate types are dictated by the --crate-type flag and the #[crate_type] attribute. The flags can be passed many times and stack with the crate attribute. 3. If the -o flag is specified, and only one output type is specified, the output will be emitted at this location. If more than one output type is specified, then the filename of -o is ignored, and all output goes in the directory that -o specifies. The -o option always ignores the --out-dir option. 4. If the --out-dir flag is specified, all output goes in this directory. 5. If -o and --out-dir are both not present, all output goes in the current directory of the process. 6. When multiple output types are specified, the filestem of all output is the same as the name of the CrateId (derived from a crate attribute or from the filestem of the crate file). Closes #7791 Closes #11056 Closes #11667
2014-02-03 15:27:54 -08:00
-> OutputFilenames {
match *ofile {
Redesign output flags for rustc This commit removes the -c, --emit-llvm, -s, --rlib, --dylib, --staticlib, --lib, and --bin flags from rustc, adding the following flags: * --emit=[asm,ir,bc,obj,link] * --crate-type=[dylib,rlib,staticlib,bin,lib] The -o option has also been redefined to be used for *all* flavors of outputs. This means that we no longer ignore it for libraries. The --out-dir remains the same as before. The new logic for files that rustc emits is as follows: 1. Output types are dictated by the --emit flag. The default value is --emit=link, and this option can be passed multiple times and have all options stacked on one another. 2. Crate types are dictated by the --crate-type flag and the #[crate_type] attribute. The flags can be passed many times and stack with the crate attribute. 3. If the -o flag is specified, and only one output type is specified, the output will be emitted at this location. If more than one output type is specified, then the filename of -o is ignored, and all output goes in the directory that -o specifies. The -o option always ignores the --out-dir option. 4. If the --out-dir flag is specified, all output goes in this directory. 5. If -o and --out-dir are both not present, all output goes in the current directory of the process. 6. When multiple output types are specified, the filestem of all output is the same as the name of the CrateId (derived from a crate attribute or from the filestem of the crate file). Closes #7791 Closes #11056 Closes #11667
2014-02-03 15:27:54 -08:00
None => {
// "-" as input file will cause the parser to read from stdin so we
// have to make up a name
// We want to toss everything after the final '.'
let dirpath = match *odir {
Some(ref d) => d.clone(),
None => Path::new(".")
Redesign output flags for rustc This commit removes the -c, --emit-llvm, -s, --rlib, --dylib, --staticlib, --lib, and --bin flags from rustc, adding the following flags: * --emit=[asm,ir,bc,obj,link] * --crate-type=[dylib,rlib,staticlib,bin,lib] The -o option has also been redefined to be used for *all* flavors of outputs. This means that we no longer ignore it for libraries. The --out-dir remains the same as before. The new logic for files that rustc emits is as follows: 1. Output types are dictated by the --emit flag. The default value is --emit=link, and this option can be passed multiple times and have all options stacked on one another. 2. Crate types are dictated by the --crate-type flag and the #[crate_type] attribute. The flags can be passed many times and stack with the crate attribute. 3. If the -o flag is specified, and only one output type is specified, the output will be emitted at this location. If more than one output type is specified, then the filename of -o is ignored, and all output goes in the directory that -o specifies. The -o option always ignores the --out-dir option. 4. If the --out-dir flag is specified, all output goes in this directory. 5. If -o and --out-dir are both not present, all output goes in the current directory of the process. 6. When multiple output types are specified, the filestem of all output is the same as the name of the CrateId (derived from a crate attribute or from the filestem of the crate file). Closes #7791 Closes #11056 Closes #11667
2014-02-03 15:27:54 -08:00
};
let mut stem = match *input {
// FIXME (#9639): This needs to handle non-utf8 paths
FileInput(ref ifile) => ifile.filestem_str().unwrap().to_str(),
StrInput(_) => ~"rust_out"
};
// If a crateid is present, we use it as the link name
let crateid = attr::find_crateid(attrs);
match crateid {
None => {}
Some(crateid) => stem = crateid.name.to_str(),
}
OutputFilenames {
out_directory: dirpath,
out_filestem: stem,
single_output_file: None,
}
}
Redesign output flags for rustc This commit removes the -c, --emit-llvm, -s, --rlib, --dylib, --staticlib, --lib, and --bin flags from rustc, adding the following flags: * --emit=[asm,ir,bc,obj,link] * --crate-type=[dylib,rlib,staticlib,bin,lib] The -o option has also been redefined to be used for *all* flavors of outputs. This means that we no longer ignore it for libraries. The --out-dir remains the same as before. The new logic for files that rustc emits is as follows: 1. Output types are dictated by the --emit flag. The default value is --emit=link, and this option can be passed multiple times and have all options stacked on one another. 2. Crate types are dictated by the --crate-type flag and the #[crate_type] attribute. The flags can be passed many times and stack with the crate attribute. 3. If the -o flag is specified, and only one output type is specified, the output will be emitted at this location. If more than one output type is specified, then the filename of -o is ignored, and all output goes in the directory that -o specifies. The -o option always ignores the --out-dir option. 4. If the --out-dir flag is specified, all output goes in this directory. 5. If -o and --out-dir are both not present, all output goes in the current directory of the process. 6. When multiple output types are specified, the filestem of all output is the same as the name of the CrateId (derived from a crate attribute or from the filestem of the crate file). Closes #7791 Closes #11056 Closes #11667
2014-02-03 15:27:54 -08:00
Some(ref out_file) => {
let ofile = if sess.opts.output_types.len() > 1 {
sess.warn("ignoring specified output filename because multiple \
outputs were requested");
None
} else {
Some(out_file.clone())
};
if *odir != None {
sess.warn("ignoring --out-dir flag due to -o flag.");
}
OutputFilenames {
out_directory: out_file.dir_path(),
out_filestem: out_file.filestem_str().unwrap().to_str(),
single_output_file: ofile,
}
}
}
}
2014-02-07 00:38:33 +02:00
pub fn early_error(msg: &str) -> ! {
diagnostic::DefaultEmitter.emit(None, msg, diagnostic::Fatal);
fail!(diagnostic::FatalError);
}
2014-01-29 18:42:19 -08:00
pub fn list_metadata(sess: Session, path: &Path,
out: &mut io::Writer) -> io::IoResult<()> {
metadata::loader::list_file_metadata(
2014-01-29 18:42:19 -08:00
session::sess_os_to_meta_os(sess.targ_cfg.os), path, out)
}
#[cfg(test)]
mod test {
use driver::driver::{build_configuration, build_session};
use driver::driver::{build_session_options, optgroups};
use getopts::getopts;
use syntax::attr;
use syntax::attr::AttrMetaMethods;
// When the user supplies --test we should implicitly supply --cfg test
#[test]
fn test_switch_implies_cfg_test() {
let matches =
&match getopts([~"--test"], optgroups()) {
2013-05-29 19:59:33 -04:00
Ok(m) => m,
Err(f) => fail!("test_switch_implies_cfg_test: {}", f.to_err_msg())
};
2014-02-11 01:10:26 +09:00
let sessopts = build_session_options(matches);
2014-02-07 00:38:33 +02:00
let sess = build_session(sessopts, None);
let cfg = build_configuration(sess);
2013-05-23 09:39:10 -07:00
assert!((attr::contains_name(cfg, "test")));
}
// When the user supplies --test and --cfg test, don't implicitly add
// another --cfg test
#[test]
fn test_switch_implies_cfg_test_unless_cfg_test() {
let matches =
2013-05-23 09:39:10 -07:00
&match getopts([~"--test", ~"--cfg=test"], optgroups()) {
2013-05-29 19:59:33 -04:00
Ok(m) => m,
Err(f) => {
fail!("test_switch_implies_cfg_test_unless_cfg_test: {}",
2013-09-27 22:38:08 -07:00
f.to_err_msg());
}
};
2014-02-11 01:10:26 +09:00
let sessopts = build_session_options(matches);
2014-02-07 00:38:33 +02:00
let sess = build_session(sessopts, None);
let cfg = build_configuration(sess);
2014-02-02 02:19:55 +11:00
let mut test_items = cfg.iter().filter(|m| m.name().equiv(&("test")));
assert!(test_items.next().is_some());
assert!(test_items.next().is_none());
}
}